| non port: dns/dnsutl/Makefile |
|
SVNWeb
|
Number of commits found: 26 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] 66ee090 (Only the first 10 of 188 ports in this commit are shown above. )
dns: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Samorukov <samm@freebsd.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Allan Jude <allanjude@freebsd.org>
* Amar Takhar <verm@drunkmonk.net>
* Anders Nordby <anders@fix.no>
* Andrew Greenwood <greenwood.andy@gmail.com>
* Anton Berezin <tobez@FreeBSD.org>
* Ashish SHUKLA <ashish@FreeBSD.org>
* Attila Nagy <bra@fsn.hu> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 15 Nov 2020
|
[ 13:24 mikael ]  
dns/dnsutl: mark as broken on aarch64
FAILED test of common/srrf.c file
Reported by: linimon
|
|
Mon, 4 Nov 2019
|
[ 21:21 rene ] (Only the first 10 of 99 ports in this commit are shown above. )
Returns johans's ports to the pool after safekeeping his commit bit.
|
|
Thu, 30 Nov 2017
|
[ 06:13 linimon ] (Only the first 10 of 189 ports in this commit are shown above. )
For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.
This is part two of a multipart commit to bring armv7 ports to parity
with armv6.
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com -exp run
|
|
Sun, 28 May 2017
|
[ 21:18 antoine ] (Only the first 10 of 12 ports in this commit are shown above. )
Register dependency on groff
PR: 213725
|
|
Fri, 26 May 2017
|
[ 20:02 linimon ] (Only the first 10 of 32 ports in this commit are shown above. )
Mark some ports failing on armv6, for errors classified as "???".
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
|
|
Thu, 8 Dec 2016
|
[ 19:52 tijl ] (Only the first 10 of 551 ports in this commit are shown above. )
Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 5 Oct 2014
|
[ 18:01 tijl ] (Only the first 10 of 50 ports in this commit are shown above. )
- Update devel/libtool and devel/libltdl to version 2.4.2.418
- Patch libtool so it uses the same library version specification as on
Darwin, Linux and other systems. Given the version current:revision:age
a library will be given the extension .so.major.age.revision with major
equal to current-age. Before libtool would use .so.current on FreeBSD.
- Patch libtoolize to remove two cases of umask 0 that caused libltdl
files to be copied world writable (--ltdl option)
- Let USES=libtool patch this new version correctly
- Adjust all ports with USES=libtool:build and bump PORTREVISION on their
dependent ports if a library version changed
PR: 194068
Exp-run by: antoine
Approved by: portmgr (antoine)
|
|
Sun, 11 May 2014
|
[ 08:25 johans ]
- Update to dnsutl 1.12
- Adopt port
|
|
Sat, 10 May 2014
|
[ 18:28 antoine ] (Only the first 10 of 13 ports in this commit are shown above. )
Reset more maintainers:
<yar@FreeBSD.org>: host hub.freebsd.org[8.8.178.136] said: 550 5.1.1
<yar@FreeBSD.org>: Recipient address rejected: User unknown in local
<rud@cs.uni-magdeburg.de>: host mail.cs.uni-magdeburg.de[141.44.21.48] said:
550 5.1.1 <rud@cs.uni-magdeburg.de>... User unknown (in reply to RCPT TO
<stefan@fh-mainz.de>: host srv-eml-pmva-02.fh-mainz.de[143.93.114.189] said:
550 5.1.1 <stefan@fh-mainz.de>: Recipient address rejected: undeliverable
<ocaml-ounit-port@kotka.de>: host kotka.de[62.75.247.120] said: 550 5.1.1
<ocaml-ounit-port@kotka.de>: Recipient address rejected: User unknown in
<toru@tenchi.ne.jp>: host tuna.tenchi.ne.jp[49.212.63.105] said: 550 5.1.1(Only the first 15 lines of the commit message are shown above )
|
|
Mon, 17 Feb 2014
|
[ 13:24 bapt ]
Support stage
|
|
Fri, 20 Sep 2013
|
[ 16:31 bapt ] (Only the first 10 of 165 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
dns)
|
|
Thu, 19 Nov 2009
|
[ 22:07 pav ] (Only the first 10 of 68 ports in this commit are shown above. )
- Mark MAKE_JOBS_UNSAFE
Reported by: pointyhat
|
|
Sat, 22 Aug 2009
|
[ 00:18 amdmi3 ] (Only the first 10 of 417 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with D
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 11 Aug 2007
|
[ 10:00 rafan ]
- Update to 1.11
- Update WWW
- Pass maintainership to submitter
PR: ports/115267
Submitted by: Stefan Pauly <stefan at fh-mainz.de>
|
|
Mon, 5 Mar 2007
|
[ 00:15 linimon ] (Only the first 10 of 11 ports in this commit are shown above. )
Reset inactive maintainer due to maintainer-timeouts and no response to email.
Hat: portmgr
|
|
Wed, 13 Jul 2005
|
[ 09:27 pav ]
- Update to 1.7
- Take maintainership
PR: ports/83332
Submitted by: Sylvio Cesar <sylvioc@gmail.com>
|
|
Mon, 3 Nov 2003
|
[ 22:05 edwin ]
remove obsolete mastersite
|
|
Wed, 22 Oct 2003
|
[ 08:08 krion ]
- Unbreak dns/dnsutl on 5.x
PR: 58356
Submitted by: Markus Brueffer <brueffer@phoenix-systems.de>
|
|
Sun, 12 Oct 2003
|
[ 08:28 kris ]
BROKEN on 5.x (does not build)
|
[ 08:27 kris ]
Reset bouncing maintainer address
|
|
Fri, 5 Sep 2003
|
[ 04:54 edwin ] (Only the first 10 of 55 ports in this commit are shown above. )
Massive repo-copies request: net->dns (partly devel->dns)
PR: ports/56020
Submitted by: Kimura Fuyuki <fuyuki@nigredo.org>
Approved by: portmgr
|
Number of commits found: 26 |
As an Amazon Associate I earn from qualifying purchases.