21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:21 Tobias C. Berner (tcberner) 

editors: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohout <shanee@augusta.de>
  *  Andrej Zverev <az@inec.ru>
  *  Andrey Zakhvatov
  *  Anton Tornqvist <antont@inbox.lv>
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Bob Eager <bob@eager.cx>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Chris Petrik <chris@officialunix.com>
  *  Christian Brueffer <chris@unixpages.org>
  *  Craig Leres <leres@FreeBSD.org>
  *  Daniel Eischen <deischen@FreeBSD.org>
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  David Thiel <lx@redundancy.redundancy.org>
  *  Diego Depaoli <trebestie@gmail.com>
  *  Dima Dorfman <dima@unixfreak.org>
  *  Dmitri Goutnik <dg@syrec.org>
  *  Dominic Mitchell
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Frederic Cambus
  *  Gea-Suan Lin <gslin@gslin.org>
  *  Geoffrey Mainland <mainland@apeiron.net>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Hakisho Nukama <nukama@gmail.com>
  *  James Bailie <jimmy@mammothcheese.ca>
  *  Janos Mohacsi <janos.mohacsi@bsd.hu>
  *  Jason Evans <jasone@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Jille Timmermans (jille@quis.cx)
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Merryweather Cooper et al
  *  Jun-ichiro itojun Itoh <itojun@itojun.org>
  *  KIMURA Yasuhiro <yasu@utahime.org>
  *  Kelly Yancey <kbyanc@posi.net>
  *  Kenneth Vestergaard Schmidt <kvs@pil.dk>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Leif Pedersen <bilbo@devpit.org>
  *  MANTANI Nobutaka <nobutaka@nobutaka.com>
  *  Mark Pulford <mark@kyne.com.au>
  *  Martin Blapp
  *  Matías Pizarro <matias@pizarro.net>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael L. Hostbaek (mich@freebsdcluster.org)
  *  Michael Vasilenko <acid@stu.cn.ua>
  *  Miguel Clara <miguelmclara@gmail.com>
  *  Mohammad S. Babaei <info@babaei.net>
  *  Nicola Vitale <nivit@email.it>
  *  Olga Smirnova <mistresssilvara@hotmail.com>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Olivier Duchateau
  *  Patrick Li <pat@databits.net>
  *  Peter Wemm <peter@FreeBSD.org>
  *  Philippe Lefebvre <nemesis@balistik.net>
  *  Rimvydas Jasinskas <zrj@ef.irc>
  *  Roman Shterenzon <roman@xpert.com>
  *  Satoshi Asami (asami)
  *  Shaun Amott <shaun@FreeBSD.org>
  *  Shigeyuki FUKUSHIMA <shige@FreeBSD.org>
  *  Shigeyuki Fukushima <shige@FreeBSD.org>
  *  Stanislav Sedov <stas@core.310.ru>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Vitaly Magerya <vmagerya@gmail.com>
  *  Xin LI <delphij@FreeBSD.org>
  *  Ying-Chieh Liao
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yoichi NAKAYAMA <yoichi@eken.phys.nagoya-u.ac.jp>
  *  alepulver
  *  brett@peloton.physics.montana.edu
  *  buganini@gmail.com
  *  eric
  *  erich@rrnet.com
  *  gahr
  *  gelf
  *  giffunip@asme.org
  *  ijliao
  *  jkh
  *  joerg
  *  joseph@randomnetworks.com
  *  krion
  *  lightside <lightside@gmx.com>
  *  pgf
  *  rch@richard.eu.org
  *  tetsushi NAKAI <nakai@tsl.pe.u-tokyo.ac.jp>
  *  tg
  *  thierry@pompo.net
  *  torstenb@FreeBSD.org
  *  verm

With hat:	portmgr

    7cd7a8d

12:58 Alexey Dokuchaev (danfe) 

Style: improve ONLY_FOR_ARCHS_REASON (grammar, markup, etc.)

ONLY_FOR_ARCHS_REASON is used as part of the sentence and thus should
start with lower-case letter and not end with a period which is added
by the framework, similar to other knobs like BROKEN, IGNORE, et al.

While here, remove needless quoting, add missing Oxford comma, expand
contractions and jargonisms, use correct spelling for proper names.

    61b6613

19:44 Baptiste Daroussin (bapt) 

INSTALLS_ICONS: retire the macro and rework the related dependencies

While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)

    2c672a4

20:41 Lewis Cook (lcook)  Author: Matías Pizarro

editors/linux-sublime3: Add missing LICENSE file

While here, pet portclippy and portfmt.

PR:	256104

    83539d8

19:05 Neel Chauhan (nc)  Author: Matías Pizarro

editors/linux-sublime3: Pass maintainership to submitter and add LICENSE

PR:	256090

    b712fce

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

11:56 ehaupt 

Reset maintainership upon maintainers request.

Approved by:	Miguel Clara <miguelmclara@gmail.com> (maintainer, via mail)

 

09:07 ehaupt 

Update to 3.2.2

PR:		241605
Submitted by:	james.wright@digital-chaos.com
Approved by:	miguelmclara@gmail.com (maintainer, via e-mail)

 

10:08 tobik 

e*: Add missing USES={gnome,sdl,xorg}

 

21:38 swills 

editors/linux-sublime3: update to build 3176

PR:		228445
Submitted by:	Pedro F. Giffuni <pfg@FreeBSD.org>
Approved by:	maintainer timeout (miguelmclara@gmail.com, > 2 weeks)

 

13:35 tobik 

editors/linux-sublime3: Update to 3.1.43

PR:		222367
Reported by:	godevilove@ya.ru
Submitted by:	eric@camachat.org
Approved by:	miguelmclara@gmail.com (maintainer)

 

16:54 tijl 

- Autodetect the installed linux_base port and use LINUX_DEFAULT only as
  a last resort.
- Construct a list of DISTFILES for every architecture (amd64, i386).
  Select one list for regular make and all lists for make makesum so linux
  ports can have one combined distinfo file.
- Set DIST_SUBDIR?=centos so there's only one copy of common distfiles.
- Use MASTER_SITES and DISTFILES groups so make fetch is a bit smarter.
- Regenerate all distinfo files.
- For linux_base-c6 (just like linux_base-c7 already does) turn bin, lib,
  lib64 and sbin into symbolic links to the same directory under usr.
  This fixes the problem where some programs/libraries exist under / on
  FreeBSD and /usr on Linux or vice versa and then depending on the order
  of search paths Linux programs may run/load FreeBSD programs/libraries
  and fail.
- Turn usr/share/icons into a symbolic link to LOCALBASE/share/icons so
  Linux programs can find desktop theme icons.  This eliminates the need
  for x11-themes/linux*-hicolor-icon-theme.
- Rename pkg-plist.x86_64 to pkg-plist.amd64.
- Regenerate all pkg-plist files.
- Add @preexec to linux_base pkg-plist that moves existing files in bin,
  lib, lib64, sbin and icons to the new destination before the directories
  are turned into symbolic links.
- Remove several empty directories from linux_base ports.
- Sweep over all linux ports: use consistent style, remove old CONFLICTS,
  remove unused pkg-descr files, add NLS option,...
- Remove old linux arts, esound and openssl-compat ports.

 

10:44 tijl 

Make 64 bit Linux packages the default on amd64.

 

13:52 tijl 

Update to 3.1.26 and add 64-bit support.

PR:		213399
Submitted by:	miguelmclara@gmail.com (maintainer)

 

12:43 tijl 

- In Uses/linux.mk use the loop variable directly when appending to
  *_DEPENDS.  Helper variables derived from the loop variable aren't
  expanded causing *_DEPENDS to be incorrect.
- Bump all ports with more than one value in USE_LINUX.

PR:		211645
Reported by:	jkim

 

19:23 tijl 

- Replace Mk/bsd.linux-apps.mk and Mk/bsd.linux-rpm.mk with
  Mk/Uses/linux.mk.
- Replace USE_LINUX=yes with USES+=linux and USE_LINUX=(.*) with
  USES+=linux:\1 in all ports.
- Replace USE_LINUX_APPS with USE_LINUX in all ports.
- Use INSTALL_SCRIPT instead of INSTALL_PROGRAM to install scripts in some
  ports.
- When USE_LINUX_RPM is defined, simplify the way DISTFILES and EXTRACT_ONLY
  are defined.
- Remove BRANDELF_DIRS and BRANDELF_FILES handling.  In the very rare cases
  that it is still necessary ports can run ${BRANDELF} from post-patch.
- Remove AUTOMATIC_PLIST handling.  Only one port used it.
- Fix Linux MASTER_SITES.
- Replace OVERRIDE_LINUX_BASE_PORT and OVERRIDE_LINUX_NONBASE_PORTS with
  default versions framework.
- bsd.port.mk:
  - Move Linux related bits to Uses/linux.mk, except USE_LINUX_PREFIX.
  - Put USE_LINUX_PREFIX handling after USES processing.
  - Define DOCSDIR, DATADIR, etc. after handling USE_LINUX_PREFIX so it can
    give these variables a different default value.
  - When a package needs to run Linux ldconfig check before installation if
    Linux support is enabled.
- emulators/linux_base-*:
  - Use USES=linux and remove duplication.
  - Remove files/lp.  FreeBSD or CUPS lp(1) should work.
  - Remove files/yp.conf.  No longer seems to be used.
  - Remove pkg-deinstall and move pkg-install into pkg-plist.
  - Update pkg-descr and pkg-message.
  - Fix handling of ldconfig cache in pkg-plist.
- devel/fb-adb: Use a Linux shell to run a Linux script but patch the script
  to use FreeBSD mkdir so mkdir -p $path creates $path and not
  /compat/linux/$path.

PR:		211645
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

17:50 amdmi3 

- Fix conflicts between linux-sublime and linux-sublime3

Approved by:	portmgr blanket

 

17:48 amdmi3 

- Rename editors/sublime3 to editors/linux-sublime3 and add PKGNAMESUFFIX
  - Bring port directory and package names in sync
  - Resolve PKGBASE conflict with editors/linux-sublime

PR:		205694
Approved by:	portmgr blanket (due to PKGBASE conflict)