notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
NOTE: the WWW: line in pkg-descr was relocated to a WWW= line in Makefile. Each port in FreshPorts has a homepage link. Look for it right after the Description: on each port's home page.

Do I know someone who can pick up a server from 7401 E. Ben White Blvd. Austin TX?

The emphasis is on know, or recommended by someone I know. This is the original FreshPorts server, way past useful: RAID, 8GB RAM, etc. The drives need to be wiped and everything recycled.
non port: editors/texworks/Makefile
SVNWeb

Number of commits found: 103 (showing only 100 on this page)

1 | 2  »  

Sun, 11 Sep 2022
[ 10:20 Felix Palmen (zirias) search for other commits by this committer ]    commit hash:ddae4e92d8313a1461145e3b4f0232fe463feaee  commit hash:ddae4e92d8313a1461145e3b4f0232fe463feaee  commit hash:ddae4e92d8313a1461145e3b4f0232fe463feaee  ddae4e9  (Only the first 10 of 1105 ports in this commit are shown above. View all ports for this commit)
Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349
[ 07:26 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:541d96e3f69f3ef9617bf01d1b53160126d9c82e  commit hash:541d96e3f69f3ef9617bf01d1b53160126d9c82e  commit hash:541d96e3f69f3ef9617bf01d1b53160126d9c82e  541d96e  (Only the first 10 of 70 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: bump port revision of consumers after upgrade to 22.09
Wed, 7 Sep 2022
[ 21:10 Stefan E├čer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 9 Aug 2022
[ 05:50 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:016c05440cdebb806a101c4fc3d937e4460a8e9d  commit hash:016c05440cdebb806a101c4fc3d937e4460a8e9d  commit hash:016c05440cdebb806a101c4fc3d937e4460a8e9d  016c054  (Only the first 10 of 70 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: bump dependencies

Bump port revisions of poppler users after
04f1b0c1a895851aed9221282c1a503bc7415a37
Wed, 20 Jul 2022
[ 14:21 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:7cd7a8d850aa40bd9f93927a98e3664a54cf15e1  commit hash:7cd7a8d850aa40bd9f93927a98e3664a54cf15e1  commit hash:7cd7a8d850aa40bd9f93927a98e3664a54cf15e1  7cd7a8d  (Only the first 10 of 119 ports in this commit are shown above. View all ports for this commit)
editors: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Andreas Kohout <shanee@augusta.de>
  *  Andrej Zverev <az@inec.ru>
  *  Andrey Zakhvatov
  *  Anton Tornqvist <antont@inbox.lv>
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Bob Eager <bob@eager.cx>
  *  Chris D. Faulhaber <jedgar@fxp.org>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 6 Jul 2022
[ 16:25 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:7e5fe8fd655d14e422f09fc438c832da02aaf181  commit hash:7e5fe8fd655d14e422f09fc438c832da02aaf181  commit hash:7e5fe8fd655d14e422f09fc438c832da02aaf181  7e5fe8f  (Only the first 10 of 70 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: bump PORTREVISION of poppler consumers
Sun, 5 Jun 2022
[ 14:03 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:7c24f75361dfdc9389427aafce3b07ff3ece28e4  commit hash:7c24f75361dfdc9389427aafce3b07ff3ece28e4  commit hash:7c24f75361dfdc9389427aafce3b07ff3ece28e4  7c24f75  (Only the first 10 of 70 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: bump port revision of consumers after 22.06 upgrade
Mon, 9 May 2022
[ 16:48 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:f22f615ec337d1c92d021ad4ecd1d2e83cfc4af5  commit hash:f22f615ec337d1c92d021ad4ecd1d2e83cfc4af5  commit hash:f22f615ec337d1c92d021ad4ecd1d2e83cfc4af5  f22f615  (Only the first 10 of 60 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: bump portrevision of consumers
Tue, 26 Apr 2022
[ 16:59 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:7dd73cf4355b3a17721dccc492575071ee8a2e84  commit hash:7dd73cf4355b3a17721dccc492575071ee8a2e84  commit hash:7dd73cf4355b3a17721dccc492575071ee8a2e84  7dd73cf  (Only the first 10 of 60 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: bump portrevision of consumers

Bump revisions after 0ee787592d5a due to so-version bump.

PR:		 263009
Tue, 29 Mar 2022
[ 18:37 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:6f59b7b9ba9db93f0c84a85b375866675168c2da  commit hash:6f59b7b9ba9db93f0c84a85b375866675168c2da  commit hash:6f59b7b9ba9db93f0c84a85b375866675168c2da  6f59b7b  (Only the first 10 of 71 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: bump consumers

Bump consumers of graphics/poppler after
e25859e09380f5930718094423dc8616cbb202b3
Sat, 19 Feb 2022
[ 02:25 Muhammad Moinur Rahman (bofh) search for other commits by this committer ]    commit hash:8374a33c804a728bf435da801571ae9905244f50  commit hash:8374a33c804a728bf435da801571ae9905244f50  commit hash:8374a33c804a728bf435da801571ae9905244f50  8374a33  (Only the first 10 of 139 ports in this commit are shown above. View all ports for this commit)
tex* : Update version 20150521=>20210325

- Update MASTER_SITES_TEX_CTAN from https://tug.org/historic/
- Update texlua to use texlua53 library
- Deprecate CSLaTeX format
- Remove aleph as per Upstream
- Add common variables TEXLIVE_YEAR and TEXLIVE_VERSION to be used in
  all ports related to tex*
- Fix dependency of print/texlive-texmf-source [1]
- devel/tex-kpathsea: Update version 6.2.1=>6.3.3
- devel/tex-libtexlua: Update version 5.2.4=>5.3.6
- devel/tex-libtexluajit: Update version 2.0.3=>2.1.0
- devel/tex-synctex: Update version 1.17.0=>2.0.0
- devel/tex-web2c: Update version 20150521=>20210325
- editors/texworks: Fix build with newer tex version
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Mon, 13 Dec 2021
[ 20:13 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:fd68e9e2b677db0444fd7dd5aeac01b0adc93209  commit hash:fd68e9e2b677db0444fd7dd5aeac01b0adc93209  commit hash:fd68e9e2b677db0444fd7dd5aeac01b0adc93209  fd68e9e  (Only the first 10 of 68 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 21.12

Release 21.12.0:
    core:
         * Add API to add images
         * CairoOutputDev: Fix de-duping of Flate images
         * Fix crash on broken files when using non-default
ENABLE_ZLIB_UNCOMPRESS. Issue #393
         * Minor code improvements

    glib:
         * Add API for validation of signatures
         * Add API to read/save to file descriptor

    utils:
         * pdftohtml: Reduce sensitivity of duplicate detection. Issue #1117

    build system:
         * Increase C++ standard to 17

Exp-run by:	antoine
PR:		260344
Mon, 8 Nov 2021
[ 15:16 Gleb Popov (arrowd) search for other commits by this committer ]    commit hash:e886c38c6ea942eeca9f3eec7ebe95fa4f9adcd7  commit hash:e886c38c6ea942eeca9f3eec7ebe95fa4f9adcd7  commit hash:e886c38c6ea942eeca9f3eec7ebe95fa4f9adcd7  e886c38  (Only the first 10 of 61 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION of graphics/poppler consumers.

PR:		259656
Tue, 12 Oct 2021
[ 18:23 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:e140c1eb790b4d25211bfe4db61a93cc02b6c972  commit hash:e140c1eb790b4d25211bfe4db61a93cc02b6c972  commit hash:e140c1eb790b4d25211bfe4db61a93cc02b6c972  e140c1e  (Only the first 10 of 73 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: bump consumers after 2dee0997fbc9ee01991f73f0fa55f9b18908a264
Mon, 6 Sep 2021
[ 16:31 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:d98b56f1deb5b6a03a7e04fc16192ecb2af9df1e  commit hash:d98b56f1deb5b6a03a7e04fc16192ecb2af9df1e  commit hash:d98b56f1deb5b6a03a7e04fc16192ecb2af9df1e  d98b56f  (Only the first 10 of 27 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 21.09

Release 21.09.0:
        core:
         * Splash: Massive speed improvement on files that use lots of
save/restore (q/Q) operators
         * Correct decoding of signature properties Reason & Location when they
are Unicode
         * Fix issues with malformed files
         * MSVC build fixes

        build system:
         * Call cmake_minium_required() before project()
         * Always append to CMAKE_{C,CXX}_FLAGS_${CMAKE_BUILD_TYPE}
         * correctly forward user-provided flags to try_compile()

Exp-run by:	antoine
PR:		258206
Sun, 15 Aug 2021
[ 05:42 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:9a1df6a85c1a7b2231d237f407815337e4213595  commit hash:9a1df6a85c1a7b2231d237f407815337e4213595  commit hash:9a1df6a85c1a7b2231d237f407815337e4213595  9a1df6a  (Only the first 10 of 68 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 21.08.0

Release 21.08.0:
        core:
         * Add API to allow addition and modification of outlines into a PDF
         * Use additional samples to test for constant parts of an axial
gradient
         * forms: Create fallback fonts for some well known font names
         * Support reading the PDF Version from the Catalog
         * Fix XRef::copy when there are modified objects
         * Take into account that Date string may be in unicode
         * JBIG2Stream: Fix regression in "Do not consider a size-0 to be an
error"
         * Replace a local bubble sort implementation by std::sort
         * Fix issues with malformed files

        build system:
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 6 Jul 2021
[ 20:00 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:fac489c1647530936821da748ad7a671b952463b  commit hash:fac489c1647530936821da748ad7a671b952463b  commit hash:fac489c1647530936821da748ad7a671b952463b  fac489c  (Only the first 10 of 68 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 21.07.0

Release 21.07.0:
        core:
         * JBIG2Stream: Do not consider a size-0 to be an error. Issue #535
         * PSOutputDev: fix off-by-one error for image masking in L1/L2 output.
Issue #1088
         * CairoOutputDev: Fix memory leak on broken files
         * Minor code improvements

        build system:
         * set C standard to 11 without extensions

Exp-run by:	antoine
PR:		256981
Mon, 7 Jun 2021
[ 13:26 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:c5676761368b0e829c1692a4bd7deea9d7bfc92c  commit hash:c5676761368b0e829c1692a4bd7deea9d7bfc92c  commit hash:c5676761368b0e829c1692a4bd7deea9d7bfc92c  c567676  (Only the first 10 of 74 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 21.06.0

Release 21.06.0:
        core:
         * Fix rendering of some extended latin1 characters in annotations.
Issue #1070
         * Support some not so well formed documents with password. Issue #1083
         * Add API to get notified if the xref is reconstructed
         * Add somewhat fancier left/right signature visual representation
         * Fix crashes in malformed files
         * Minor code improvements

        qt6:
         * Change some functions to return std::unique_ptr

        qt5/qt6:
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 6 May 2021
[ 04:12 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:cc4315b370580787f8f12f4f788bb47f6ff7544a  commit hash:cc4315b370580787f8f12f4f788bb47f6ff7544a  commit hash:cc4315b370580787f8f12f4f788bb47f6ff7544a  cc4315b  (Only the first 10 of 70 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 21.05.0

Release 21.05.0:
        core:
         * Fix crashes in malformed files
         * Export SplashFont* symbols used by Scribus
         * Minor code improvements

        qt5/qt6:
         * Make sure new signatures are always properly oriented
         * Allow to pass the border width when signing

        glib:
         * Enhance find to support multi-line matching

        utils:
         * pdftoppm: Fix regression when using single scaleTo. Issue #1062

        build system:
         * Allow to disable building manual tests

PR:		255562
Exp-run by:	antoine
Fri, 16 Apr 2021
[ 04:29 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:2f973a2955686494aff30a15f18be3fa0492d9de  commit hash:2f973a2955686494aff30a15f18be3fa0492d9de  commit hash:2f973a2955686494aff30a15f18be3fa0492d9de  2f973a2  (Only the first 10 of 70 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 21.04.0

Release 21.04.0:
        core:
         * Hide symbols by default
         * TextSelectionDumper: fix word order for RTL text
         * Fix rendering of text in some files. Issue #1052
         * Implement rendering of Masks of Image subtype. Issue #1058
         * Forms: fix unclicking standalone form buttons. Issue #1034

        glib:
         * Expose more fields from MediaRendition in PopplerMedia
         * Use stock glib macro to define boxed type
         * Remove incorrecly used volatile from enum type registration code
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Mon, 8 Mar 2021
[ 19:32 tcberner search for other commits by this committer ] Original commit   Revision:567866 (Only the first 10 of 68 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 21.03.0

Release 21.03.0:
        core:
         * Fix parsing text in some broken pdf files. Issue #1040
         * Fix memory issue when using threads. Issue #1050
         * TextSelectionDumper: Fix getText() for space after word
         * Change signature of OutputDev:tilingPatternFill
         * Make PDFDocBuilder return a std::unique_ptr
         * Improve well formed check for shading functions
         * Fix leak in case of fread failing
         * Fix memory leak in broken file in JBIG2Stream::readGenericBitmap
         * PSOutputDev: Fix stack overflow in broken files

        glib:
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 9 Feb 2021
[ 11:10 tcberner search for other commits by this committer ] Original commit   Revision:564779 (Only the first 10 of 74 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 21.02

Release 21.02.0:
        core:
         * GfxCal*ColorSpace: introduce Bradford transform for chromatic
adaptation
         * Fix memory leak if saving the file fails
         * Internal code improvements
         * Fix various issues handling broken files
         * Make checkedAdd work for long long in MSVC

        qt5:
         * Properly export NewSignatureData class
         * Fix regression in QIODeviceOutStream + MSVC

        qt6:
         * Properly export NewSignatureData class
         * Fix regression in QIODeviceOutStream + MSVC

        utils:
         * pdftohtml: Fix error() parameter type

PR:		253183
Exp-run by:	antoine
Thu, 7 Jan 2021
[ 19:23 tcberner search for other commits by this committer ] Original commit   Revision:560727 (Only the first 10 of 68 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 21.01.0

Release 21.01.0:
        core:
         * Faster routines for jpeg decoding
         * Fix reading signatures in encrypted files
         * Add white point correction when lcms is used
         * JBIG2Stream: Fix byte counting
         * Fix potential data loss if we try to fetch a non existing Ref after
modifying the document
         * Specifically use DeviceGray instead of DefaultGray for softmasks
         * Fix various issues handling broken files

        utils:
         * pdftocairo: Setmode binary for windows
         * pdfsig: Add hability to digitally sign files
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 11 Dec 2020
[ 20:10 tcberner search for other commits by this committer ] Original commit   Revision:557760 (Only the first 10 of 68 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 20.12.0

Changelog:
        core:
         * Draw better circles for circle annotations
         * Fix annotation line width if no appearance stream or style are given
         * Tweak rendering of highlight annotations
         * Fix border rendering of some annotations
         * Fix rendering of some files. Issue #976 Issue #567
         * PSOutputDev: provide options to set the rasterization color space and
ICC profile
         * PSOutputDev: for splashModeCMYK8 and language level >=2 activate
overprint emulation
         * PSOutputDev: use the DeviceN8 bitmap for rasterization with
CMYK-output + overprint
         * Use the font name without subset tag when querying for a system font
         * Splash: Fix wrong x adjustment during clipping
         * Splash: Fix blitImage in uncolored tiling patterns
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 3 Nov 2020
[ 19:48 tcberner search for other commits by this committer ] Original commit   Revision:554017 (Only the first 10 of 73 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 20.11.0

Release 20.11.0:
        core:
         * More work on rendering of standalone Annot Widgets. Issue #806
         * Fix crashes in embedded file handling on broken files. Issue #967
         * Fix uninitialized memory read on broken files
         * Save a bit of memory in Dict data

        cpp:
         * Fix crashes in embedded file handling on broken files. Issue #966

        utils:
         * pdftohtml: HTML and XML output includes font opacity.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sun, 11 Oct 2020
[ 10:58 tcberner search for other commits by this committer ] Original commit   Revision:552050 (Only the first 10 of 69 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 20.10.0

Release 20.10.0:
        core:
         * Filter out repeated forms
         * Implement EmbedStream::reset()
         * CairoOutputDev: evict just font faces owned solely by cache.
         * Splash: Rename Yd to Ydown, Xu to Xup, etc.
         * Splash: fix crash in out-of-memory situation.
         * Fix some undefined behaviour situation with forged files

PR:		250052
Exp-run by:	antoine
Thu, 10 Sep 2020
[ 18:32 tcberner search for other commits by this committer ] Original commit   Revision:548218 (Only the first 10 of 76 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 20.09.0

Release 20.09.0:
        core:
         * Compability fix for Forms
         * Fix fetching of Objects failing in some cases
         * Fix clearing date in Annot setModified/setDate
         * TextSelectionPainter: support glyphless fonts
         * Splash: Don't try read past end of image
         * avoid abort() on large memory allocation
         * Fix memory leak on broken files
         * Fix potential invalid memory read
         * Small code improvements

        qt5:
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 14 Aug 2020
[ 04:22 tcberner search for other commits by this committer ] Original commit   Revision:544866 (Only the first 10 of 74 ports in this commit are shown above. View all ports for this commit)
Bump revisions of poppler consumers after r544863
Mon, 6 Jul 2020
[ 06:17 tcberner search for other commits by this committer ] Original commit   Revision:541311 (Only the first 10 of 75 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.90

Release 0.90.0:
        core:
         * Color profile tweaks
         * Small signature improvements
         * BBoxOutputDev: Fix calculation when type3 fonts are involved
         * Fix potential crash when reading Forms
         * Fix infinite loop in broken file
        glib:
         * Fix adding annots in rotated pages
         * Add ability to reset forms
         * Several fixes to the documentation
        qt5:
         * Make it clear we require Qt 5.5
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 2 Jun 2020
[ 14:47 tcberner search for other commits by this committer ] Original commit   Revision:537559 (Only the first 10 of 76 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.89.0

Release 0.89.0:
        core:
         * Add support for ResetForm action. Issue #225
         * Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
         * Fix exporting to PS of some files with CID fonts
         * Use ICC profiles in PS output (if new enough lcms is used)
         * Allow almost-singular tiling pattern matrices. Issue #894
         * Fix memory leak when failing to load some fonts
         * CairoOutputDev: Use stroke opacity when clipping to a stroke path
         * CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190

        glib:
         * Add poppler_movie_get_aspect

        cpp:
         * Add the font infos to the text_box object

Exp-run by:	antoine
PR:		246848
Sat, 2 May 2020
[ 10:00 tcberner search for other commits by this committer ] Original commit   Revision:533681 (Only the first 10 of 76 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.88.0

Release 0.88.0:

        core:
         * Support Widget Annotation Buttons not linked to any Form
         * SplashOuputDev: Use stroking opacity when clipping to a stroke path
         * Handle 1 bit RGB images in ICC colorspace
         * Internal code improvements

        qt5:
         * Add Document::signatures. Returns signatures not attached to any page
         * ArthurOutputDev: Fix font hinting
         * ArthurOutputDev: Set the opacity when filling with axial gradients
         * ArthurOutputDev: Implement the clipToStrokePath method
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 2 Apr 2020
[ 04:41 tcberner search for other commits by this committer ] Original commit   Revision:530258 (Only the first 10 of 78 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.87.0

Release 0.87.0:
        core:
         * Fix crashes due to inconsistent vtables for Clang builds
         * Fix leak in broken files
         * Internal code improvements

        qt5:
         * Add option to get form choice for export value
         * ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695

        glib:
         * Internal code improvements

         utils:
         * pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest

PR:		245150
Exp-run by:	antoine
Sat, 21 Mar 2020
[ 12:57 tcberner search for other commits by this committer ] Original commit   Revision:528853 (Only the first 10 of 78 ports in this commit are shown above. View all ports for this commit)
Update poppler to 0.86.1

Release 0.86.1:
        core:
         * Fix regression in Browse Link handling
         * Internal code improvements

Release 0.86.0:
        core:
         * Fix link content exfiltration attack
         * Splash: Implement gouraudTriangleShadedFill for some non parametrized
shadings. Issue #881
         * Fix case unsensitive search for Old Hungarian, Warang Citi,
Medefaidrin and Adlam
         * Internal code improvements

        glib:
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Mon, 3 Feb 2020
[ 19:32 tcberner search for other commits by this committer ] Original commit   Revision:525052 (Only the first 10 of 72 ports in this commit are shown above. View all ports for this commit)
Bump revision of poppler dependencies

- poppler was updated in r525051, bump revisions
Wed, 22 Jan 2020
[ 17:59 tcberner search for other commits by this committer ] Original commit   Revision:523824 (Only the first 10 of 88 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.84.0

Release 0.84.0:
        core:
         * Fix crash when converting from Unicode to ASCII-7
         * Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
         * JBIG2Stream: fix potential crash in malformed documents
         * JBIG2Stream: fix leak in reset() if called several times
         * Internal code improvements

        utils:
         * pdfimages: Add error message if first page is larger then number of
pages.
         * pdfinfo: Improved paper size recognition
         * pdfsig: Fix exit code when dumping signatures
         * pdftocairo: Error out when even/odd selects 0 pages
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 1 Nov 2019
[ 21:51 tcberner search for other commits by this committer ] Original commit   Revision:516270 (Only the first 10 of 92 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.82.0

Release 0.82.0:
        core:
         * Fix not being able to open some files. Issue #832
         * Fix crashes in malformed files
         * Fix memory leak on broken files
         * Minor performance improvements
         * Minor code improvements

        glib:
         * Add poppler_document_new_from_bytes
         * PopplerAttachment: Silence deprecation warnings for ctime/mtime

        build system:
         * pdf-inspector: Support builddir != srcdir
         * Install Cairo* headers if Cairo has been found

Thanks to adridg@ for fixing all the fallout.

Exp-run by:	antoine
PR:		241532
Approved by:	gnome (kwm, implicit)
Sun, 29 Sep 2019
[ 07:25 tcberner search for other commits by this committer ] Original commit   Revision:513196 (Only the first 10 of 55 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.81.0

Release 0.81.0:
        core:
         * Splash: Always enable support for CMYK rasterization
         * CairoOutputDev: Check scaled dimensions for 0. Issue #737
         * BaseCryptStream: Fix potential uninitialized memory read
         * SplashBitmap: Fix wrong width condition for splashModeDeviceN8
         * Fix crashes in malformed files

PR:		240781
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)
Sun, 1 Sep 2019
[ 20:46 tcberner search for other commits by this committer ] Original commit   Revision:510739 (Only the first 10 of 60 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.80.0

Release 0.80.0:
core:
 * Annotations: Implement support for setting a different text in the appearance
stream than the real text
 * Splash: Optionally use small_vector from boost
 * Fix memory leaks on broken files
 * Fix abort on broken files
 * Small code simplifications
 * Remove USE_FIXEDPOINT support. Issue #821

qt5:
 * Fix MSVC build
 * Add subsitute-font information
 * Fix since marker of some functions
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 31 Jul 2019
[ 21:14 tcberner search for other commits by this committer ] Original commit   Revision:507740 (Only the first 10 of 55 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.79.0

Release 0.79.0:
        core:
         * Fix regression on TextSelectionPainter
         * Fix parsing of DefaultAppearance
         * Fix memory leak in PostScriptFunction
         * Fix crashes in fuzzed files

        qt5:
         * Implemented support for setIcon by changing appearance
         * Added option to set the form available to print
         * QString::null is deprecated, use QString()
         * Replace deprecated qStableSort with std::stable_sort

        build system:
         * Turn README into README.md and expand it

PR:		239277
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)
Fri, 26 Jul 2019
[ 20:46 gerald search for other commits by this committer ] Original commit   Revision:507372 (Only the first 10 of 3853 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330
Sat, 29 Jun 2019
[ 08:55 tcberner search for other commits by this committer ] Original commit   Revision:505331 (Only the first 10 of 56 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.78.0

Release 0.78.0:
        core:
         * Fix line annotation arrows for usage in dimensioning
         * Handle Ink annots without an InkList but with an AP
         * Fix typos preventing parsing of Movie start and duration
         * Fix crash on malformed files

        glib:
         * Add poppler_document_create_dests_tree()
         * Don't use the deprecated g_type_class_add_private()
         * Document the differences between render() and render_for_printing()
         * Fix introspection for poppler_document_new_from_data
         * Don't create PopplerInputStream with length 0. Issue #414
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 1 Jun 2019
[ 06:39 tcberner search for other commits by this committer ] Original commit   Revision:503222 (Only the first 10 of 66 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.77.0

Release 0.77.0:
        core:
         * Fix crash on signature handling. Issue #766
         * Fix small memory leak in SignatureHandler::getCertificateInfo
         * Splash: Restrict filling of overlapping boxes. Issue #750
         * Fix crash on malformed files

        qt5:
         * Fix optional content handling with exclusive layers

        cpp:
         * Make render_page thread-safe

        utils:
         * pdfsig: Fix small memory leak
         * pdftotext: Fix typo in manpage

PR:		238115
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)
Mon, 13 May 2019
[ 18:33 tcberner search for other commits by this committer ] Original commit   Revision:501583 (Only the first 10 of 75 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.76.1

From Changelog at https://poppler.freedesktop.org/releases.html :

Release 0.76.1:
        core:
         * Make the mul tables be calculated at compile time with constexpr.
         * splash: Fix compile with SPLASH_CMYK enabled
         * Some typo fixing in error messages

        qt5:
         * Fix regression in annotation handling

        build system:
         * Fix some typos in build system output and comments
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 27 Mar 2019
[ 21:29 tcberner search for other commits by this committer ] Original commit   Revision:496982 (Only the first 10 of 27 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.75

Release 0.75.0:
	core:
		* Fix rendering of some annotations
		* Fix crashes in broken files
		* Small internal code improvements

	cpp:
		* Improve documentation
		* tests: Add showing version information to poppler-dump

	utils:
		* pdfattach: new util
		* pdftohtml: add -dataurls parameter
		* pdftoppm: add -sep and -forcenum parameters
		* pdftohtml: make singleHtml and stout not mutually exclusive
		* pdfsig: fix use after free

- bump revisions of dependent ports due to shlib version change

PR:		236791
Exp-run by:	antoine
Approved by:	kwm (gnome)
Thu, 14 Mar 2019
[ 23:50 linimon search for other commits by this committer ] Original commit   Revision:495744
Fix build on gcc-based architectures:

  The compiler feature "cxx_decltype" is not known to CXX compiler "GNU" version
4.2.1.

Approved by:	portmgr (tier-2 blanket)
Mon, 11 Feb 2019
[ 19:44 tcberner search for other commits by this committer ] Original commit   Revision:492733 (Only the first 10 of 20 ports in this commit are shown above. View all ports for this commit)
Bump revisions after poppler upgrade.

As reported libreoffice requires a bump in revision, to be on the save
side, bump all the consumers of poppler.

Reported by:	Walter Schwarzenfeld <w.schwarzenfeld@utanet.at>
Fri, 18 Jan 2019
[ 21:14 jbeich search for other commits by this committer ] Original commit   Revision:490671 (Only the first 10 of 50 ports in this commit are shown above. View all ports for this commit)
textproc/hunspell: update to 1.7.0

- Drop const optimization as v2 API moved to nuspell

Changes:	https://github.com/hunspell/hunspell/releases/tag/v1.7.0
Wed, 16 Jan 2019
[ 11:13 tijl search for other commits by this committer ] Original commit   Revision:490472 (Only the first 10 of 1089 ports in this commit are shown above. View all ports for this commit)
Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 25 Dec 2018
[ 20:25 tcberner search for other commits by this committer ] Original commit   Revision:488341 (Only the first 10 of 1277 ports in this commit are shown above. View all ports for this commit)
Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine
Tue, 16 Oct 2018
[ 15:17 rigoletto search for other commits by this committer ] Original commit   Revision:482233
editors/texworks: compliance: re-order variables.

Approved by:	mat (mentor)
Differential Revision:	https://reviews.freebsd.org/D17577
Sun, 14 Oct 2018
[ 18:28 rigoletto search for other commits by this committer ] Original commit   Revision:482104
editors/texworks: Update to version 0.6.2.

Texworks is available now as Qt5 only because the upcoming poppler update will
not include a Qt4 version.

PR:		200302
Submitted by:	tkato432@yahoo.com (original version)
Reviewed by:	mat (mentor)
Approved by:	tcberner (mentor), hrs (maintainer, timeout)
Differential Revision:	https://reviews.freebsd.org/D17177
Sun, 29 Jul 2018
[ 22:18 gerald search for other commits by this committer ] Original commit   Revision:475857 (Only the first 10 of 1480 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542
Thu, 28 Jun 2018
[ 17:39 tcberner search for other commits by this committer ] Original commit   Revision:473503 (Only the first 10 of 1416 ports in this commit are shown above. View all ports for this commit)
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540
Mon, 18 Jun 2018
[ 19:03 linimon search for other commits by this committer ] Original commit   Revision:472706 (Only the first 10 of 28 ports in this commit are shown above. View all ports for this commit)
Adjust USES to fix builds on gcc-based architectures.

While here, pet portlint.

Tested for no regression on amd64.

Approved by:	portmgr (tier-2 blanket)
Sun, 18 Mar 2018
[ 05:09 linimon search for other commits by this committer ] Original commit   Revision:464869
Mark broken on armvX.

Approved by:	portmgr (tier-2 blanket)
Thu, 30 Nov 2017
[ 15:50 mat search for other commits by this committer ] Original commit   Revision:455210 (Only the first 10 of 2423 ports in this commit are shown above. View all ports for this commit)
Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 24 Aug 2017
[ 13:45 swills search for other commits by this committer ] Original commit   Revision:448669 (Only the first 10 of 31 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION after recent poppler update
Sat, 7 Jan 2017
[ 14:43 jbeich search for other commits by this committer ] Original commit   Revision:430796 (Only the first 10 of 46 ports in this commit are shown above. View all ports for this commit)
textproc/hunspell: update to 1.6.0

- Restore DIST_SUBDIR from r305651
- Adjust license for "or later" clause
- Restore GPLv2+/LGPL21+ license files removed upstream as
  GPLv3+/LGPL3+ only affects Hunspell 2.0 (not currently built)
- Unbreak |make makepatch|

Changes:	https://github.com/hunspell/hunspell/releases/tag/v1.6.0
PR:		215714
Submitted by:	sunpoet (based on)
Exp-run by:	antoine
MFH:		2017Q1
Differential Revision:	https://reviews.freebsd.org/D8887
[ 10:42 olivierd search for other commits by this committer ] Original commit   Revision:430778 (Only the first 10 of 50 ports in this commit are shown above. View all ports for this commit)
Chase update of graphics/poppler (and slaves ports) in revision r430777
Sat, 3 Dec 2016
[ 22:24 jbeich search for other commits by this committer ] Original commit   Revision:427743 (Only the first 10 of 42 ports in this commit are shown above. View all ports for this commit)
textproc/hunspell: update to 1.5.4

Changes:	https://github.com/hunspell/hunspell/blob/v1.5.4/ChangeLog
PR:		214837
Exp-run by:	antoine (for 1.5.3)
Approved by:	office (bapt)
Mon, 5 Sep 2016
[ 20:02 olivierd search for other commits by this committer ] Original commit   Revision:421390 (Only the first 10 of 50 ports in this commit are shown above. View all ports for this commit)
Chase update of Poppler after revision r421386
Mon, 23 May 2016
[ 20:35 amdmi3 search for other commits by this committer ] Original commit   Revision:415742 (Only the first 10 of 217 ports in this commit are shown above. View all ports for this commit)
Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by
default anyway and don't need to be listed

Approved by:	portmgr blanket
Fri, 1 Apr 2016
[ 14:00 mat search for other commits by this committer ] Original commit   Revision:412346 (Only the first 10 of 5103 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
Thu, 21 Jan 2016
[ 19:40 kwm search for other commits by this committer ] Original commit   Revision:406872 (Only the first 10 of 61 ports in this commit are shown above. View all ports for this commit)
Update poppler to 0.40.0. [1]

Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.

PR:		206293 [1]
Submitted by:	olivierd@ [1]
Obtained from:	ubuntu [2], rubygem-poppler upstream [3]
Tue, 8 Dec 2015
[ 09:05 mat search for other commits by this committer ] Original commit   Revision:403255 (Only the first 10 of 45 ports in this commit are shown above. View all ports for this commit)
Don't use GH_TAGNAME when DISTVERSION* variables can be used.

With hat:	portmgr
Sponsored by:	Absolight
Sat, 22 Aug 2015
[ 19:03 hrs search for other commits by this committer ] Original commit   Revision:395048
- Update to 0.4.6.
- Use libsynctex.so provided by devel/tex-synctex.
Sun, 2 Aug 2015
[ 16:06 kwm search for other commits by this committer ] Original commit   Revision:393431 (Only the first 10 of 58 ports in this commit are shown above. View all ports for this commit)
Update poppler to 0.34.0. [1]

Chase all users of shlib version change of libpoppler.so.

PR:		201477 [1]
Submitted by:	olivierd@ [1]
Mon, 11 May 2015
[ 18:34 mat search for other commits by this committer ] Original commit   Revision:386097 (Only the first 10 of 285 ports in this commit are shown above. View all ports for this commit)
Cleanup DIST* variables.

When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup

With hat:	portmgr
Sponsored by:	Absolight
Tue, 3 Feb 2015
[ 12:28 kwm search for other commits by this committer ] Original commit   Revision:378348 (Only the first 10 of 55 ports in this commit are shown above. View all ports for this commit)
Update poppler to 0.30.0 [1].

Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].

PR:		196599 [1]
Submitted by:	olivierd@ [1]
Exp-run by:	antoine@
Obtained from:	upstream [2]
Sun, 21 Dec 2014
[ 17:55 antoine search for other commits by this committer ] Original commit   Revision:375175
Put back the plugin directory in the plist
Sat, 20 Dec 2014
[ 18:12 bapt search for other commits by this committer ] Original commit   Revision:375031
Cleanup plist
Wed, 10 Dec 2014
[ 22:29 gahr search for other commits by this committer ] Original commit   Revision:374492 (Only the first 10 of 129 ports in this commit are shown above. View all ports for this commit)
- Reset maintainership of my ports
Tue, 25 Nov 2014
[ 12:55 makc search for other commits by this committer ] Original commit   Revision:373404 (Only the first 10 of 51 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION after graphics/poppler update to 0.26.3
Sun, 19 Oct 2014
[ 15:43 mva search for other commits by this committer ] Original commit   Revision:371188 (Only the first 10 of 34 ports in this commit are shown above. View all ports for this commit)
- Convert ports from dns/, editors/ and emulators/ to new
  USES=python

Approved by:	portmgr (implicit)
Mon, 26 May 2014
[ 15:30 bapt search for other commits by this committer ] Original commit   Revision:355361
Finish conversion to USES=lua
Fri, 27 Dec 2013
[ 16:54 kwm search for other commits by this committer ] Original commit   Revision:337749 (Only the first 10 of 56 ports in this commit are shown above. View all ports for this commit)
Update poppler to 0.24.4.

Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.

Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.
Fri, 22 Nov 2013
[ 12:55 makc search for other commits by this committer ] Original commit   Revision:334589
- Convert to USES=qmake
- Support staging properly

Approved by:	portmgr (blanket approval)
Thu, 14 Nov 2013
[ 11:00 gahr search for other commits by this committer ] Original commit   Revision:333750
- Fix installation of HTML manual
[ 09:54 gahr search for other commits by this committer ] Original commit   Revision:333745
- Update to 0.4.5
- Add optional support for Lua and Python scripting
Tue, 8 Oct 2013
[ 17:37 marino search for other commits by this committer ] Original commit   Revision:329815
Explicitly define LDFLAGS for 4 QT4-based ports

Fixes come from dports.  Problem and solution verified on
FreeBSD using gcc48.

Approved by:	portmgr (bapt, implicit)
Fri, 20 Sep 2013
[ 16:36 bapt search for other commits by this committer ] Original commit   Revision:327720 (Only the first 10 of 298 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
editors)
Wed, 14 Aug 2013
[ 22:35 ak search for other commits by this committer ] Original commit   Revision:324744 (Only the first 10 of 1725 ports in this commit are shown above. View all ports for this commit)
- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)
Tue, 23 Apr 2013
[ 10:19 bapt search for other commits by this committer ] Original commit   Revision:316337 (Only the first 10 of 13 ports in this commit are shown above. View all ports for this commit)
Convert e* to USES=pkgconfig
Thu, 21 Mar 2013
[ 05:27 mezz search for other commits by this committer ] Original commit   Revision:314805 (Only the first 10 of 30 ports in this commit are shown above. View all ports for this commit)
- Update poppler to 0.22.2.
- Bump the rest ports that depend on the poppler and poppler-qt because of
  shared library version have been changed.
- Add a note in the UPDATING for require to rebuild all ports that depend
  on poppler.

Submitted by:	kwm (poppler* part)
Mon, 18 Mar 2013
[ 08:08 gahr search for other commits by this committer ] Original commit   Revision:314536
- Make spellchecking work by fixing the path to dictionary files
- Bump PORTREVISION

Reported by:	 Sergey <potzilov@gmail.com>
Thu, 28 Feb 2013
[ 17:12 makc search for other commits by this committer ] Original commit   Revision:313116
- Add missing Qt4 components to fix build [1]
- Respect CC, etc by passing QMAKEFLAGS to qmake
- Tweak desktop entry

Approved by:	gahr (maintainer)
Reported by:	miwi [1]
Wed, 23 Jan 2013
[ 15:00 makc search for other commits by this committer ] Original commit   Revision:310871 (Only the first 10 of 237 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION after DESKTOP_ENTRIES update
Fri, 7 Dec 2012
[ 08:27 gahr search for other commits by this committer ] Original commit   Revision:308416
- Fix pkgconf dependency declaration

Feature safe:	yes
Reported by:	jhale
Thu, 6 Dec 2012
[ 16:55 danfe search for other commits by this committer ] Original commit   Revision:308393
- Cleanup the Makefile, NOPORTDOCS -> PORT_OPTIONS:MDOCS
- Augment port description

Approved by:	maintainer (gahr)
Feature safe:	yes
[ 15:06 gahr search for other commits by this committer ] Original commit   Revision:308386
- Update to 0.4.4
  Release announcement: http://tug.org/pipermail/texworks/2012q2/005468.html
- Fix DESKTOP entry
- Install MAN1 page
- Respect NOPORTDOCS

Feature safe:	yes
[ 11:20 gahr search for other commits by this committer ] Original commit   Revision:308381
- Take maintainership
- Remove duplicate dependency (devel/dbus is implied by QT4 dbus component)
- Simplify do-configure target
- Remove article from COMMENT

Feature safe:	yes
[ 10:02 jhale search for other commits by this committer ] Original commit   Revision:308376
- Return maintainership to the pool at maintainer's request
- Trim Makefile headers

PR:		ports/174217, ports/174218, ports/174220, ports/174221
Submitted by:	Diego Depaoli <trebestie@gmail.com> (maintainer)
Feature safe:	yes
Wed, 6 Jun 2012
[ 06:44 miwi search for other commits by this committer ] Original commit  (Only the first 10 of 587 ports in this commit are shown above. View all ports for this commit)
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)
Fri, 1 Jun 2012
[ 05:26 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4371 ports in this commit are shown above. View all ports for this commit)
- update png to 1.5.10
Mon, 31 Oct 2011
[ 09:53 kwm search for other commits by this committer ] Original commit  (Only the first 10 of 62 ports in this commit are shown above. View all ports for this commit)
Update poppler to 0.18.0.

The qt3 bindings are removed upstream.
The glib library lost the last gdk-pixbuf code. And rename it from
-gtk to -glib.

Thanks to:      pav for a exp-runs
                bapt for double checking the libreoffice ports
Tue, 23 Aug 2011
[ 18:36 kwm search for other commits by this committer ] Original commit  (Only the first 10 of 27 ports in this commit are shown above. View all ports for this commit)
Chase poppler shlib bumps.
Mon, 18 Jul 2011
[ 16:21 jlaffaye search for other commits by this committer ] Original commit  (Only the first 10 of 12 ports in this commit are shown above. View all ports for this commit)
- Connect textproc/hunspell to the build
- Unconnect hungarian/hunspell
- Chase hunspell move
- Add an entry to MOVED and UPDATING

Approved by:    bapt (mentor)
Sat, 20 Nov 2010
[ 15:38 kwm search for other commits by this committer ] Original commit  (Only the first 10 of 20 ports in this commit are shown above. View all ports for this commit)
Chase poppler update.
Sun, 28 Mar 2010
[ 06:47 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4470 ports in this commit are shown above. View all ports for this commit)
- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Number of commits found: 103 (showing only 100 on this page)

1 | 2  »