09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

23:12 Lorenzo Salvadore (salvadore)  Author: Daniel Menelkir

all: Return Daniel Menelkir's ports to the pool per his request

PR:		266294

    12a4cab

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

12:08 Fernando Apesteguía (fernape)  Author: Daniel Menelkir

emulators/{catapult,openmsx}: update to 18.0

ChangeLog:
https://raw.githubusercontent.com/openMSX/openMSX/RELEASE_18_0/doc/release-notes.txt

PR:	264702
Reported by:	dmenelkir@gmail.com
MFH:	2022Q2	(bugfix release)

    9a977da

19:11 Charlie Li (vishwin) 

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

    d63665f

08:27 Matthias Fechner (mfechner) 

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

    247c7db

15:56 Jason E. Hale (jhale) 

*/*: Update maintainer's email address

PR:		262198

    c10ed45

10:59 Hiroki Tagato (tagattie)  Author: Daniel Menelkir

emulators/catapult: re-add port: GUI for openMSX

Catapult is a frontend for OpenMSX, the open source MSX
emulator that tries to achieve near-perfect emulation by
using a novel emulation model.

WWW: https://openmsx.org

PR:		257892
Reported by:	Daniel Menelkir <menelkir@itroll.org> (new maintainer)

    894b604

07:54 antoine 

Deprecate a few ports

With hat:	portmgr

 

10:08 tobik 

e*: Add missing USES={gnome,sdl,xorg}

 

21:21 rene 

Returns johans's ports to the pool after safekeeping his commit bit.

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

17:46 gerald 

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

 

18:35 antoine 

- Those ports fail to build with python3
- Add some explicit FLAVOR to dependencies where needed

 

06:13 linimon 

For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.

This is part two of a multipart commit to bring armv7 ports to parity
with armv6.

Approved by:	portmgr (tier-2 blanket)
Obtained from:	lonesome.com -exp run

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

19:24 linimon 

Provide error messages for some ports failing on aarch64, and, in a
few cases, other tier-2 archs.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

 

15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

09:38 gerald 

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

 

10:51 johans 

Update OpenMSX Catapult to 0.13.0

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

19:09 johans 

Update OpenMSX and Catapult to 0.12.0
https://raw.githubusercontent.com/openMSX/openMSX/RELEASE_0_12_0/doc/release-notes.txt

 

19:51 bapt 

Remove ansi version fo wxGTK 2.8 and only keep the unicode version

All applications in the ports tree works correctly with unicode version of wxGTK

Newer version of wxGTK are unicode only (3.0+)

Note that now WX_UNICODE macro is noop

 

18:58 johans 

Update catapult to 0.11.0

 

15:43 mva 

- Convert ports from dns/, editors/ and emulators/ to new
  USES=python

Approved by:	portmgr (implicit)

 

16:24 marino 

emulators/catapult is not jobs safe

It can attempt to use config.h before it's fully generated.  I've seen
this a few times already.

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

07:05 johans 

Update to OpenMSX 0.10.1

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

15:25 bapt 

Use wx 2.8 only (does not build with 3.0)
Use unicode version

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

23:30 gerald 

Replace USE_GCC=4.6+ by USE_GCC=yes.

Approved by:	portmgr (mat)

 

12:14 johans 

- Update to 0.10.0
  This version requires WX 2.8+ and a modern C++0x compiler
- Adopt port

 

05:15 marino 

emulators/catapult: Fix installation in /root, add DragonFly support

After DragonFly support was added, it was discovered that this port was
writing in /root/.local, which is not permissible.  Settng
CATAPULT_NO_DESKTOP_HOOKS stops that, but requires that catapult.xpm
be manually installed, which was added to post-install target.

 

23:32 pawel 

- Respect CXX
- Install desktop entry file
- Support staging

PR:		ports/184890
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>

 

11:11 zeising 

Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0]
If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG=
to /etc/make.conf to get the old version.

Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0

Fix dissapearing cursor in xf86-video-vmware [2]

Stagify all x11@-owned ports

Bump portrevisions for xf86-* ports due to xserver version change.

Fix fallout from updates where needed.

Thanks to:	all testersi, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/184684 [1], ports/181385 [2]
Submitted by:	Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by:	portmgr (bdrewery), core (jhb) [0]

 

17:01 zeising 

The FreeBSD graphics/x11 team proudly presents
a kwm, zeising production:

MESA 9.1.6

Starring:
Mesa 9.1.6, including libGL, libGLU and dri (new xorg only)
Addition of libEGL and libglesv2
KMS support for ATI graphics cards in 10-current (new xorg only)
Improved sparc64 support for new xorg. [1]
pixman 0.30.2, including shlib bump and portrevision bumps
libX11 1.6.2
Make absolute pointing devices work with x11-drivers/xf86-input-mouse
x11-drivers/xf86-video-ati 7.2.0 for 10-current (KMS aware ati driver)

Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
When updating MESA related ports (libGL, dri) you need to remove old versions
first.  See UPDATING for details.

PR:		ports/181962 [2]
Submitted by:	marius [1]
		zeising [2]
Exp-run by:	bdrewery
Approved by:	portmgr (bdrewery)

Thanks to all who helped testing!

 

16:43 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
emulators)

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

14:37 zeising 

The FreeBSD x11 team proudly presents
an zeising, kwm, miwi, bapt, eadler production:

Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.

PR:		ports/177942
Exp-run by:	miwi
Approved by:	portmgr (miwi)

Thanks to all who helped testing!

 

08:50 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

 

18:10 ak 

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

 

19:11 mm 

Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports

 

10:42 pawel 

- Update to version 0.9.1
- Convert to OptionsNG
- Mark MAKE_JOBS_SAFE

PR:		ports/171993
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>
Feature safe:	yes

 

05:26 dinoex 

- update png to 1.5.10

23:24 miwi 

 - Update to version 0.8.2

PR:             164989
Submitted by:   Ports Fury

12:31 miwi 

- Update to 0.8.1

PR:             155834
Submitted by:   Ports Fury

05:13 miwi 

- Update to 0.8.0

PR:             148552
Submitted by:   Ports Fury

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

06:06 miwi 

- Update to 0.7.2

PR:             140669
Submitted by:   Ports Fury

00:20 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with E,F

02:51 wxs 

- Reset maintainer and remove old MASTER_SITES.

PR:             ports/137224
Submitted by:   Martin Tournoij <carpetsmoker@rwxrwxrwx.net> (maintainer)

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

12:30 itetcu 

- fix plist with -DNOPORTDOCS and bump PORTREVISION
- update maintainer's email address

PR:             ports/125829
Submitted by:   Martin Tournoij (maintainer)

13:27 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

13:54 miwi 

- Fix build with AMD64

PR:             120867
Submitted by:   Martin Tournoij <carpetsmoker@xs4all.nl> (maintainer)
                pavbot

08:49 miwi 

Catapult is a GUI for openMSX.

WWW: http://openmsx.sourceforge.net/

PR:             ports/120008
Submitted by:   Martin Tournoij <carpetsmoker at xs4all.nl>