12:55 rene 

Deprecate ports which depend on Linux GTK1 libraries and schedule them for
removal
on December 1st, 2013.

Discussed on:	emulation@ (2013-10-06)

Approved by:	maintainer timeout (emulators/linux-pe*), private mail
Approved by:	maintainer (games/HeroesOfMightAndMagic), via IRC

 

16:43 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
emulators)

 

08:35 bsam 

. update to version 1.77;
. trim Makefile headers;
. lang maintainership to the submitter.

While I'm here: remove the indefinite article from COMMENT.

PR:		ports/173464
Submitted by:	Naram Qashat <cyberbotx@cyberbotx.com>

 

15:23 bsam 

Convert ports which use RUN_DEPENDS+=.../graphics/linux_dri to
using USE_LINUX_APPS+=dri. This is needed to switch a default
linux base at 8-CURRENT to linux_base-f10. No PORTREVISION bump
is needed since it's mere infrastructure fix. Affected ports:
-----
emulators/linux-pete-mesagpu/Makefile
emulators/linux-pete-xgl2gpu/Makefile
games/atitd/Makefile
games/linux-coldwar-demo/Makefile
games/linux-darwinia-demo/Makefile
games/linux-defcon/Makefile
games/linux-doom3-demo/Makefile
games/linux-gorky17-demo/Makefile
games/linux-nerogame/Makefile
games/linux-nwnclient/Makefile
games/linux-savage/Makefile
games/linux-savage-samuraiwars/Makefile
games/linux-uplink-demo/Makefile
games/linux-ut2003-demo/Makefile
games/linux-ut2004-demo/Makefile
games/linux-virtual-jay-peak/Makefile
games/linux-warsow/Makefile
graphics/linux-ac3d/Makefile
math/mupad/Makefile
net/skype12/Makefile
-----

Approved by:    maintainer timeout (2 months, the needed changes were submitted
to emulation@ at 2009-04-09)

17:28 bsam 

Welcome to the new linux ports infrastructure which allows using
both current (fc4) and future linux (f8) distributions at one
ports tree.

The patch contains full changes to ports/Mk files and all ports involved.
But only infrastructure is changed. The resulting packages are the same as
before. Hence no need to bump PORTREVISIONs.

The idea was taken from bsd.gnome.mk and others.

More than 130 ports are switched to follow a new linux infrastructure
introduced by changes to bsd.port.mk, bsd.linux-rpm.mk and a new
bsd.linux-apps.mk.

Thanks for all who was involved and helped me with this work.
And help from Alexander Leidinger was incredible.

Other changes are coming. Stay tuned!

PR:             ports/132510
Submitted by:   bsam (me)
Exp-run by:     portmgr (pav)

19:55 linimon 

Maintainer is no longer active in FreeBSD.

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

07:54 jylefort 

Add amd64 to ONLY_FOR_ARCHS

PR:             ports/92400
Submitted by:   Yuri Pankov <yuri.pankov@gmail.com>

10:25 netchild 

linux_mesa3 (deprecatred) -> linux_dri (possibly hardware accelerated)

I assume the maintainer overlooked this port in the patchset, since
he already committed a similar change to another port and didn't
objected to any patch in the patchset. So I take a shortcut and just
commit the patch instead of further delaying the move from linux_mesa3
to linux_dri.

Submitted by:   Ulrich Spoerlein <spoerlein@informatik.uni-wuerzburg.de>
Approved by:    maintainer timeout (a week and a half)

15:07 jylefort 

- Update to 1.76
- Polish the Makefile

22:59 netchild 

Mega-patch to cleanup the ports infrastructure regarding our linux bits:
  - USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
    tools to strip binaries anymore, so it's not neccesary anymore to override
    STRIP and STRIP_CMD.
  - USE_LINUX_PREFIX implies NO_MTREE now.
  - In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
    instead upon the native FreeBSD libraries.
  - The variable LINUX_BASE_PORT contains a string which is suitable as an
    item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
    default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
    instead of a hardcoded reference.
  - Change all ports to comply to the "new world order".
  - The Ports Collection now allows to override the default linux_base port.
    Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
    ${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
    ${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
  - If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
    port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
    be marked as IGNORE. [1]
  - Readd USE_LINUX knobs into several ports and make several uses of a
    conditional dependency ("USE_LINUX?=") into an unconditional one
    ("USE_LINUX=") which where removed/changed by Trevor to allow the use of
    alternative linux_base ports. While this is a nice goal, the implementation
    resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
    in this commit is supposed to fix the problem while keeping the feature.
    Basicaly this includes a backout of Trevor's commit, to prevent confusion
    I mention it here explicitely.
  - Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
    Chase dependencies for this.
  - Changes to make linux_devtools installable on amd64, remove some stray
    device nodes (they don't work on recent OS versions and aren't really
    needed).
  - Make linux_base-8 PREFIX clean and remove some stray device nodes.
    Additionally tell a little bit more about how to setup NIS/YP [2].
  - Update the PGSQL dependency in the linux-opengroupware port to a recent
    version (the old one isn't available anymore), I don't know if this
    works (at least it isn't more broken than before).
  - Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
    ports, the former path exists already and gets populated by other
    packages too (PREFIX=LINUXPREFIX!).
  - Fix some obvious (non-linuxolator) bugs in some linux ports while being
    there.
  - Bump PORTREVISION where neccesary.

Requested by:   portmgr (linimon) [1]
Submittted by:  Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by:    portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on:      ports cluster (kris)
Reviewed by:    silence on emulation@
Superseedes PR: 69997

Maintainer approval from:
        chris@chrisburkert.de
        cracauer@cons.org
        des
        girgen
        jamie@bishopston.net
        mezz
        mi
        nivit@users.sf.net
        pat
        simond@irrelevant.org
        riggs@rrr.de
        Udo.Schweigert@Siemens.com

22:10 jylefort 

Change my MAINTAINER email address to jylefort@FreeBSD.org

Approved by:    adamw (mentor)

21:51 trevor 

Respect the user's USE_LINUX setting.

10:31 netchild 

 - Use a binary RPM of Mesa v3 instead of building it from source:
   * get's rid of the linux_devtools dependency
   * fixes the conflicts seen at deinstall time on pointyhat
 - correct the paths for the GL/GLU libs in the dependencies (the RPM
   installs the mesa libs to .../lib/ instead to .../X11R6/lib/)

Nagging by:     pointyhat

20:46 pav 

- Fix uninstall, cleanup

PR:             ports/76599
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be> (maintainer)

18:24 netchild 

Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.

It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).

This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).

Changes:
 - change the default linux_base from v7 to v8
 - add a newer freetype to linux_base-8 for nicer fonts display [1]
 - don't let cpio use hardlinks in the linux_base-8 port to quiet some
   warnings in some cases [2]
 - fix a cut&past error in the linux_base-8 pkg-install script [3]
 - convert the binary knob "USE_LINUX" to a version specifier, e.g.
   USE_LINUX=<value> specifies a dependency upon
   emulators/linux_base-<value>, exceptions are a value of "7" (which
   does what you want and adds a dependency to linux_base) and any
   value without a corresponding port in
   PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
   the default linux_base)
 - don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
   this allows us to use the USE_LINUX_PREFIX knob for linux_base and
   paves the way for splitting up future linux base ports into
   individual pieces
 - remove RESTRICTED from some GPL licensed ports, even when we only
   distribute binaries, we get them from official linux sites, so
   anyone can grab them there if he needs to
 - add a dependency upon the linux X11 bits where necessary (based upon
   guesswork)
 - don't use USE_X_PREFIX in some linux ports since it adds a dependency
   to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
   solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
 - bump the portrevision of the linux ports ("better safe than sorry"
   algorithm)
 - pass maintainership of the important linux infrastructure to a
   mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
   doesn't like this: tell us your bikeshed color at freebsd-emulation@,
   my color would be "linuxolator@" in case someone cares...)
 - add a pkg-install script for linux-fontconfig, but don't use it;
   everything should work without it (the FreeBSD fc-cache program should
   do all the work), but in case we need it we just need to decomment the
   pkg-install part in the Makefile
 - fix some dependencies
 - fix some bugs
 - add some static plists
 - unbreak the ports with dependecies to more than one linux_base

This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.

Known bugs:
 - the linux-mesa and linux-devtools ports install libGL*.so symlinks
 - some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
   the linux X11 port, so linx_Base-8 moans at deinstall time)

Future work (interested souls should coordinate with freebsd-emulation@):
 - add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
   or modify the behavior of USE_XLIB in the USE_LINUX case
   AFAIK trevor has some patches.
 - make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
   the PREFIX?= workaround in some linux ports
   Should be discussed/coordinated on/with x11@.
 - move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
 - update to a more recent linux base

PR:                     69997, 70539 (and maybe others)
Discussed with/on:      java@, x11@, trevor, portmgr
Tested by:              mezz, portmgr, pointyhat
RPM hunted down by:     Joseph Gelinas <scirocco@tasam.com> [1]
Requested by:           portmgr [2]
Submitted by:           kris [3]
Approved by:            portmgr

23:17 pav 

- Update to 1.75

PR:             ports/59673
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be> (maintainer)

11:59 knu 

De-pkg-comment.

08:44 edwin 

New port: emulators/linux-pete-mesagpu

This is Pete's MesaGL GPU, a PSEmu Pro GPU plugin.
Tested on the above system with emulators/linux-ePSXe (ports/46240).

PR:             ports/46482
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be>