non port: emulators/linux_base-8/Makefile |
Number of commits found: 47 |
Monday, 2 Oct 2006
|
12:38 vd
Remove expired ports:
2006-10-01 devel/rtplib
2006-09-01 emulators/linux_base
2006-09-01 emulators/linux_base-debian
2006-09-01 emulators/linux_base-8
2006-09-01 emulators/linux_base-rh-9
2006-10-01 misc/pointless
2006-10-01 www/mediawiki14
|
Saturday, 17 Jun 2006
|
09:28 netchild
Mark deprecated and set expiration time for various reasons:
- superseeded
- outdated/EOL
- no maintainer
- bitrod
While I'm here add some more conflicts.
|
Friday, 2 Jun 2006
|
21:05 netchild
Register conflict with FC*.
|
Saturday, 4 Feb 2006
|
13:01 netchild
Move the dirrm of usr to a more appropriate place and convert it to
a dirrmtry since usr/local may be populated by the user.
Noticed by: pointyhat/kris
|
Sunday, 29 Jan 2006
|
15:54 netchild
Use the new dirrmtry in the plist to remove the LINUXBASE/usr/local/*
dirs if empty, but without anoying messages if someone decides to
install some files by hand there.
Noticed by: pointyhat/kris
|
Wednesday, 25 Jan 2006
|
18:57 netchild
The read-only LINUXBASE case (after installing the ports, of course) has
to besolved differently, since the ldconfig call has to be chrooted, else
the linux ldconfig will cache some FreeBSD native libs which results in
not being able to start some programs:
- remove the symlink (linux_base)
- revert to chroot the ldconfig call (with internal functionality this
time)
|
Monday, 23 Jan 2006
|
18:38 netchild
unbreak fetch (revert master site change, it is a local change)
|
Saturday, 21 Jan 2006
|
14:52 netchild
- use MASTER_SITE_READHAT_LINUX now that fedoralegacy is added there
- pet portlint a little bit
- don't create LINUXBASE/var/run, to let linux apps access /var/run
- link LINUXBASE/etc/ld.so.cache to /var/run/linux-ld.so.cache on a
recent -current (where /etc/rc.d/abi knows how to handle the symlink);
this should allow a read-only LINUXBASE
- don't remove LINUXBASE/usr/local, someone may have installed something
there
|
Monday, 26 Dec 2005
|
02:49 pav
- A better way to trick rpm to create etc/nsswitch.conf.dist
PR: ports/90220
Submitted by: SANETO Takanori <sanewo@ba2.so-net.ne.jp>
|
Wednesday, 14 Dec 2005
|
12:06 lawrance
Examine MACHINE_ARCH instead of ARCH with respect to installation
commands that are dependent on the host machine architecture.
This fixes installation failure on amd64 in some circumstances.
PR: ports/80679 [1], ports/90252 [2]
Submitted by: OMATSU Shinichiro <koma2@lovepeers.org> [1]
Torfinn Ingolfsen <tingo@start.no> [2]
Approved by: emulation (maintainer, timeout 7 months)
|
Sunday, 4 Dec 2005
|
13:12 netchild
- fix the build on pointyhat [1]
- a little cleanup
Suggested by: kris (some parts) [1]
|
Saturday, 3 Dec 2005
|
13:55 netchild
- update bash and fileutils
- don't remove nsswitch.conf if modified [1]
- utilize the new "store GPLed sources" feature [2]
- use a master site which carries the files
Submitted by: Ulrich Spoerlein <q@galgenberg.net> [1]
Requested by: kris [2]
|
Friday, 11 Nov 2005
|
19:54 netchild
Fix the package (missing creation of empty directories).
PR: 88731
Submitted by: Boris Samorodov <bsam@ipt.ru>
Pointyhat to: netchild
|
Saturday, 5 Nov 2005
|
17:39 netchild
When installed as a package, some (empty) directories are missing. This
commit tries to solve this by adding some @exec calls into the plist.
Add a pkg-deinstall script with appropriate content which was previously
in pkg-install (ouch). [1]
PR: 82625 [1]
Submitted by: Boris B. Samorodov <bsam ipt ru>
|
Friday, 4 Nov 2005
|
01:19 pav
- Unbreak on amd64: manually run build-locale-archive that is usually runned
by rpm, but we use --noscripts here
- Portlint
|
00:27 kris
BROKEN on amd64: Incorrect pkg-plist
|
Sunday, 9 Oct 2005
|
09:29 netchild
- reformat the pkg-message
- don't generate the plist at install time, use a static plist instead
(this fixes the empty plist after the change to pre-su-install) [1]
- brand _every_ ELF executable in {,usr/}{,s}bin/
(short command line, should be used by other linux ports with a lot of
files too; contrary to the commit messages of some linux ports: brandelf
is usefull and doesn't result in foot-shooting in edge cases)
- install directly into the destination instead of bouncing through WRKSRC
Noticed by: marcus [1]
Pointy hat to: netchild [1]
|
Sunday, 2 Oct 2005
|
14:20 netchild
Change description to include amd64 instead of telling to only support x86.
Suggested by: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no>
|
Friday, 17 Jun 2005
|
22:59 netchild
Mega-patch to cleanup the ports infrastructure regarding our linux bits:
- USE_LINUX now implies NO_FILTER_SHLIBS=yes. It also doesn't use FreeBSD
tools to strip binaries anymore, so it's not neccesary anymore to override
STRIP and STRIP_CMD.
- USE_LINUX_PREFIX implies NO_MTREE now.
- In the USE_LINUX case, USE_XLIB now depends upon the linux X11 libraries
instead upon the native FreeBSD libraries.
- The variable LINUX_BASE_PORT contains a string which is suitable as an
item in *_DEPENDS, so if a port BATCH_DEPENDS or FETCH_DEPENDS upon the
default (or overriden) linux base, ${LINUX_BASE_PORT} should be used
instead of a hardcoded reference.
- Change all ports to comply to the "new world order".
- The Ports Collection now allows to override the default linux_base port.
Specify e.g. OVERRIDE_LINUX_BASE_PORT=rh-9 in /etc/make.conf to use
${PORTSDIR}/emulators/linux_base-rh-9 (the logic is to use
${PORTSDIR}/emulators/linux_base-${OVERRIDE_LINUX_BASE_PORT}).
- If USE_LINUX or OVERRIDE_LINUX_BASE doesn't point to an existing linux_base
port and if USE_LINUX isn't set to "yes" (case insensitive), the port will
be marked as IGNORE. [1]
- Readd USE_LINUX knobs into several ports and make several uses of a
conditional dependency ("USE_LINUX?=") into an unconditional one
("USE_LINUX=") which where removed/changed by Trevor to allow the use of
alternative linux_base ports. While this is a nice goal, the implementation
resulted in missing dependencies. The OVERRIDE_LINUX_BASE_PORT knob
in this commit is supposed to fix the problem while keeping the feature.
Basicaly this includes a backout of Trevor's commit, to prevent confusion
I mention it here explicitely.
- Use the correct prefix (X11- instead of LOCAL- or LINUX-) for some ports.
Chase dependencies for this.
- Changes to make linux_devtools installable on amd64, remove some stray
device nodes (they don't work on recent OS versions and aren't really
needed).
- Make linux_base-8 PREFIX clean and remove some stray device nodes.
Additionally tell a little bit more about how to setup NIS/YP [2].
- Update the PGSQL dependency in the linux-opengroupware port to a recent
version (the old one isn't available anymore), I don't know if this
works (at least it isn't more broken than before).
- Use PREFIX/usr/share/doc instead of PREFIX/usr/doc in the divx4linux
ports, the former path exists already and gets populated by other
packages too (PREFIX=LINUXPREFIX!).
- Fix some obvious (non-linuxolator) bugs in some linux ports while being
there.
- Bump PORTREVISION where neccesary.
Requested by: portmgr (linimon) [1]
Submittted by: Gerrit Kuehn <gerrit_huehn@gruft.fido.de [2]
Approved by: portmgr (kris, linimon), maintainers (or maintainer timeout)
Tested on: ports cluster (kris)
Reviewed by: silence on emulation@
Superseedes PR: 69997
Maintainer approval from:
chris@chrisburkert.de
cracauer@cons.org
des
girgen
jamie@bishopston.net
mezz
mi
nivit@users.sf.net
pat
simond@irrelevant.org
riggs@rrr.de
Udo.Schweigert@Siemens.com
|
Friday, 10 Jun 2005
|
08:27 trevor
Remove expired linux_base-6 port.
|
Tuesday, 15 Mar 2005
|
05:25 trevor
Don't error out when the user defines USE_LINUX (See PR 69997 and
bsd.port.mk 1.505).
|
Monday, 7 Feb 2005
|
03:31 obrien
GC EXTRACT_DEPENDS (now done as a BUILD_DEPENDS).
|
Saturday, 29 Jan 2005
|
11:15 netchild
Add rpm to build depends to fix the build on the cluster.
Suggested by: kris
|
Thursday, 20 Jan 2005
|
15:40 netchild
Minimal changes to let users update the linux base and the linux X11 bits
in any order:
- add the X11 lib path to ld.so.conf in the linux base port
- (re)generate the ld.so.cache file in the linux base port too
- don't change the ld.so.conf in the linux X11 port
At deinstall time the linux base port may still complain about a changed
ld.so.cache file. A clean way to solve this would be to use ("@unexec" and
"@exec") in the plist. Since the plist is autogenerated this would need
some little magic in the plist generation or we have to switch to a static
plist. Delay the decission about how to handle this until we know when/how
to update to a more recent linux base port.
|
Monday, 17 Jan 2005
|
19:37 obrien
Get the PLIST generation out of do-install and into pre-instal.
Reported by: sf
|
Sunday, 16 Jan 2005
|
03:56 obrien
Follow the porter's handbook and allow 'make all' to be run by a moral user.
|
03:51 obrien
Remove bogus do-patch: target.
Bump PORTREVISION for the move to freetype-2.1.5-0.
Properly spell gentoo.
|
Friday, 31 Dec 2004
|
18:24 netchild
Say hello to the linux mega patch, it consolidates our linux bits a
little bit and allows to proceed to a more recent linux_base from
a stable (read as: the major bugs should be ironed out or identified
and most linux ports build just fine) source.
It also allows to ship 4.11 with a working linuxolator (the EOLed
linux_base is marked forbidden because of a security hole).
This is a major update, please read UPDATING (and CHANGES if you
develop linux ports).
Changes:
- change the default linux_base from v7 to v8
- add a newer freetype to linux_base-8 for nicer fonts display [1]
- don't let cpio use hardlinks in the linux_base-8 port to quiet some
warnings in some cases [2]
- fix a cut&past error in the linux_base-8 pkg-install script [3]
- convert the binary knob "USE_LINUX" to a version specifier, e.g.
USE_LINUX=<value> specifies a dependency upon
emulators/linux_base-<value>, exceptions are a value of "7" (which
does what you want and adds a dependency to linux_base) and any
value without a corresponding port in
PORTSDIR/emulators/linux_base-<value> (which adds a dependency to
the default linux_base)
- don't implicitly add USE_LINUX with the USE_LINUX_PREFIX knob,
this allows us to use the USE_LINUX_PREFIX knob for linux_base and
paves the way for splitting up future linux base ports into
individual pieces
- remove RESTRICTED from some GPL licensed ports, even when we only
distribute binaries, we get them from official linux sites, so
anyone can grab them there if he needs to
- add a dependency upon the linux X11 bits where necessary (based upon
guesswork)
- don't use USE_X_PREFIX in some linux ports since it adds a dependency
to the FreeBSD X11 libs, as a workaround use PREFIX?= (the clean
solution would be to remove the implicit USE_XLIB from USE_X_PREFIX)
- bump the portrevision of the linux ports ("better safe than sorry"
algorithm)
- pass maintainership of the important linux infrastructure to a
mailinglist, hijack freebsd-emulation@ for this purpose (if somebody
doesn't like this: tell us your bikeshed color at freebsd-emulation@,
my color would be "linuxolator@" in case someone cares...)
- add a pkg-install script for linux-fontconfig, but don't use it;
everything should work without it (the FreeBSD fc-cache program should
do all the work), but in case we need it we just need to decomment the
pkg-install part in the Makefile
- fix some dependencies
- fix some bugs
- add some static plists
- unbreak the ports with dependecies to more than one linux_base
This also fixes some ports which are marked BROKEN because of dependencies
to v7 and v8 of linux_base at the same time.
Known bugs:
- the linux-mesa and linux-devtools ports install libGL*.so symlinks
- some "minor" plist bugs (e.g. ld.so.{conf,cache} are modified by
the linux X11 port, so linx_Base-8 moans at deinstall time)
Future work (interested souls should coordinate with freebsd-emulation@):
- add some kind of USE_LINUX_X11 knob to streamline the X11 dependencies,
or modify the behavior of USE_XLIB in the USE_LINUX case
AFAIK trevor has some patches.
- make USE_XLIB and USE_X_PREFIX orthogonal to be able to get rid of
the PREFIX?= workaround in some linux ports
Should be discussed/coordinated on/with x11@.
- move the RPM bits from x11-toolkits/linux-gtk/Makefile to PORTSDIR/Mk/
- update to a more recent linux base
PR: 69997, 70539 (and maybe others)
Discussed with/on: java@, x11@, trevor, portmgr
Tested by: mezz, portmgr, pointyhat
RPM hunted down by: Joseph Gelinas <scirocco@tasam.com> [1]
Requested by: portmgr [2]
Submitted by: kris [3]
Approved by: portmgr
|
Thursday, 30 Dec 2004
|
19:41 trevor
On amd64, the installation script contained in the glibc RPM fails.
Work around this by using the --noscripts option.
PR: 75645
Submitted by: Carlos F. A. Paniago and Conrad J. Sabatier
|
Monday, 27 Dec 2004
|
21:47 obrien
These ports should be using 'ARCH' rather than 'MACHINE_ARCH'.
Submitted by: kris
|
Tuesday, 21 Dec 2004
|
19:49 trevor
Update CONFLICTS.
PR: 75283
Submitted by: linimon
|
Sunday, 19 Dec 2004
|
02:13 trevor
Remove some lines that are no longer needed.
|
Saturday, 18 Dec 2004
|
21:54 trevor
Correct a mistake in my grouping of master site subdirectories.
|
17:58 trevor
Simplify by grouping master site subdirectories.
Clean up amd64 support by consolidating tests. Code after bsd.port.mk
was not reached.
|
Tuesday, 14 Dec 2004
|
19:26 obrien
On amd64 we want to use FALLBACK_ELF_MIB as kern.elf32.fallback_brand,
vs. kern.fallback_elf_brand.
|
19:13 obrien
First cut at supporting AMD64 (to give 32-bit support).
|
Thursday, 5 Feb 2004
|
23:19 trevor
Fix CONFLICTS lines, as requested by eik then petef:
I think it's a bug that linux_base thinks it conflicts with itself.
--petef
The problem occurs if you do
make install; make install FORCE_PKG_REGISTER=yes
which is somewhat supported, although [seldom] (never?) used.
--eik
Also record conflicts with cle_base.
|
Wednesday, 4 Feb 2004
|
05:21 marcus
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
|
Thursday, 22 Jan 2004
|
12:18 trevor
Use the CPIO macro defined in bsd.port.mk.
|
Thursday, 4 Dec 2003
|
03:41 trevor
Use the latest glibc packages. Changes are described at
<URL:http://cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2003-0689>,
<URL:http://cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2003-0859>
and <URL:https://rhn.redhat.com/errata/RHSA-2003-325.html>.
|
Wednesday, 19 Nov 2003
|
16:12 trevor
Remove the XFree86-libs RPM from here (see ports/x11/linux-XFree86-libs).
|
13:23 trevor
I don't see any use for the /compat/linux/initrd directory.
|
Thursday, 13 Nov 2003
|
14:45 trevor
Use the FIND and XARGS macros introduced in bsd.port.mk 1.391.
|
Monday, 21 Jul 2003
|
00:44 trevor
Add the libattr, libacl, libelf, and bzip2-libs packages, needed
by programs such as mv (used in installation); remove librpm404 and
rpm404-python which are unused. Make rpm an EXTRACT_DEPENDS rather
than BUILD_DEPENDS, based on Phil Pennock's suggestion for the
sgifonts port.
Submitted by: Frank Reppin (adding libattr and libacl)
|
Thursday, 3 Jul 2003
|
16:35 trevor
security fix: update the XFree86 libraries to 4.2.1 because of
what is described at <URL:http://www.xfree86.org/security/> as "an
Xlib problem that made it possible to load (and execute) arbitrary
code in privileged clients"
"local users [may] gain root privileges via a modified LD_PRELOAD
environment variable that points to a malicious module"
--CAN-2002-1472
<URL:http://cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2002-1472>
The hash matches the one in RHSA-2003:067-19 at
<URL:http://rhn.redhat.com/errata/RHSA-2003-067.html>.
|
14:38 trevor
Register conflicts among linux_base ports.
|
14:29 trevor
new i386-only linux_base port, which installs bits from release 8.0
of a Linux distribution
|
Number of commits found: 47 |