Number of commits found: 62

- Update gnucash to 3.8
- Update gnucash-docs to 3.8

Update gnucash and gnucash-dics to 3.7

- Update gnucash to 3.6
- Update gnucash-docs to 3.6

Update gnucash-docs to 3.5

Update gnucash-docs to 3.4-1.

- Update gnucash to 3.4
- Update gnucash-docs to 3.4
- Change variables order to silence portlint warnings
- add USES=gnome

- Update gnucash to 3.3
- Update gnucash-docs to 3.3
- Adapt gnucash-docs MASTER_SITES to new upstream distribution layout
- Remove old unnecessary patch from gnucash port

Update gnucash and gnucash-docs to 3.2

- Update finance/gnucash to 3.1
- Remove portscout limitation
- Add TEST option, disabled by default
- Remove upstreamed patch
- Update WWW link in pkg-descr
- Update finance/gnucash-docs to 3.1

Version 3.x brings various changes:
- Based on gtk3
- Using webkit2
- Using cmake to build
- Dropped support for guile1

For a full changelog visit https://gnucash.org/news.phtml

- Update gnucash to 2.6.20
- Update gnucash-docs to 2.6.20
- Add a patch file creating some required files missing from the distribution
  The files come from the official github repository.

- Update gnucash and gnucash-docs to 2.6.19
- Add missing dependencies reported by stage-qa

FALVORS was added in a previous commit approved in revision D13478 [1]

Approved by:	portmgr (mat) [1]

- Update finance/gnucash to 2.6.18
- Update finance/gnucash-docs to 2.6.18
- Silence portlint warning about variable ordering
- Regenerate some patches

The gnucash distfile was regenerated after initial release due to
missing files, and has a non conforming filename, so the port adds
variables to correctly handle this.

- Update finance/gnucash to 2.6.17
- Update finance/gnucash-docs to 2.6.17
- Fully convert to option/target helpers and USES localbase

Update gnucash and gnucash-docs to 2.6.16

- Update finance/gnucash to 2.6.15
- Update finance/gnucash-docs to 2.6.15
- Regenerated gnucash paatches

- Update gnucash-docs to 2.6.14

Update to 2.6.13.

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Update gnucash to 2.6.12
- Update gnucash-docs to 2.6.12

Hand gnucash over to madpilot@ who has been updating it for a while now.

Update to 2.6.11

Approved by:	kwm (gnome, implicit)

- Update finance/gnucash to 2.6.10
- Update finance/gnucash-docs to 2.6.10

Approved by:	kwm (gnome, implicit)

Update to 2.6.9

Approved by:	kwm (gnome, implicit)

- Update gnucash and gnucash-docs to 2.6.8
- Add NO_ARCH to gnucash-docs

Approved by:		kwm (gnome, implicit)

- Update gnucash and gnucash-docs to 2.6.7

Approved by:	kwm (gnome, implicit)

Update to 2.6.5

Approved by:	kwm (gnome, implicit)

Get rid of gnomehier

- Update gnucash and gnucash-docs to 2.6.4
- Remove dirrms from plist
- Consistently use DATADIR in gnucash plist

Approved by:	kwm (gnome, implicit)

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

- Update gnucash and gnucash-docs to 2.6.3
- Add USES=libtool to gnucash

PR:		ports/189630
Submitted by:	me
Approved by:	kwm (gnome)

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

(Only the first 15 lines of the commit message are shown above )

Update gnucash and gnucash-docs to 2.6.2.

PR:		ports/187364
Submitted by:	madpilot@

Update gnucash[-docs] to 2.6.1.

PR:		ports/186203
Submitted by:	madpilot@

Also update gnucash docs to 2.6.0.

Reminded by:	Robert Burmeister <Robert.Burmeister@UToledo.edu>

Add NO_STAGE all over the place in preparation for the staging support (cat:
finance)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Update to 2.4.1.

Reassign some of ahze's ports to gnome@.

Requested by:   kwm
Hat:            portmgr

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Fix error introduced in previous commit

- Switch SourceForge ports to the new File Release System: categories starting
with E,F

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

Update to 2.2.0

PR:             ports/114727
Submitted by:   Hiroto Kagotani

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update to 2.0.1

- Adopt ports

- Release maintainer to ports@ to be with gnucash

Mark BROKEN on alpha for the time being.  The build causes xsltproc to
dump core.

Use new INSTALLS_OMF.

Approved by:    bland, kwm, marcus and pav

Update to 1.8.4

Approved by:    marcus (co mentor)

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Convert scrollkeeper over to use the system catalog location.  This helps
to unbreak gtk-doc as well as removes a ton of gross hacks to support
the old location.  Also, import some CVS patches from SK to fix some
potential crashes when installing bad catalogs.

While I tested this with a full SK database rebuild, problems may still
occur.  Please let me know if you encounter any issues with OMF files
after this commit.

Update to 1.8.3.

Fix installation by using the DocBook DTDs installed on the system.

Reported by:    Peter Kostouros <kpeter@melbpc.org.au>

Update to 1.8.1.

Remove USE_GNOMENG.

Add a missing BUILD_DEPENDS on db4.

Reported by:    bento

Add gnucash-docs, the documentation for GnuCash.

PR:             48403
Submitted by:   Glenn Johnson <glennpj@charter.net>

Number of commits found: 62

12 vulnerabilities affecting 52 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2020-02-25 03:07:51