17:07 sunpoet 

- Add CPE information

 

18:34 tijl 

net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD

databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip

databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample

databases/libgdamm:
- Drop :keepla
- USES=tar:bzip2
- Use INSTALL_TARGET=install-strip

databases/libgdamm5:
- Add INSTALL_TARGET=install-strip
- Drop --enable-static (inherited from old repocopy)

devel/anjuta x11-toolkits/py-gnome-extras:
- Drop :keepla

dns/powerdns dns/powerdns-devel:
- Convert to USES=libtool
- Add INSTALL_TARGET=install-strip
- Disable static modules
- Stop creating library symlinks with .0 suffix, not needed for dynamically
  opened modules

mail/dovecot2:
- Add USES=libtool

mail/dovecot2-pigeonhole:
- Drop CONFIGURE_TARGET (incorrect for Dragonfly)
- Add USES=libtool and INSTALL_TARGET=install-strip

math/gnumeric:
- USES=libtool tar:xz

Approved by:	portmgr (implicit, bump unstaged ports)

 

09:54 tijl 

- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
  adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
  developers)

PR:		191274
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

15:40 sunpoet 

- Fix build of ftp/curl-hiphop

 

08:45 sunpoet 

- Update to 7.37.1

Changes:	http://curl.haxx.se/changes.html

 

12:45 sunpoet 

- Update to 7.37.0
- Use USES=libtool:oldver

Changes:	http://curl.haxx.se/changes.html

 

06:18 sunpoet 

- Specify ABI version

Submitted by:	tijl

 

17:52 sunpoet 

- Fix NSS option
- Bump PORTREVISION

PR:		ports/189987
Submitted by:	ashish

 

16:57 sunpoet 

- Cleanup regression-test:

 

19:11 sunpoet 

- Fix build failure when SPNEGO option is on

 

15:17 sunpoet 

- Fix HTTP2 option

Reported by:	many

 

20:59 sunpoet 

- Update to 7.36.0

Changes:	http://curl.haxx.se/changes.html

 

16:22 sunpoet 

- Add HTTP2 option

 

19:53 sunpoet 

- Add security/heimdal and security/krb5 support and corresponding options:
  - GSSAPI_BASE for base system (default)
  - HEIMDAL_PORT for security/heimdal
  - KRB5_PORT for security/krb5

Tested by:	redports

 

18:17 sunpoet 

- Use USES=tar:lzma

 

15:20 sunpoet 

- Remove no-op NTLM option

PR:		ports/186902
Submitted by:	Jeremy Chadwick <jdc@koitsu.org>

 

13:50 sunpoet 

- Update to 7.35.0

Changes:	http://curl.haxx.se/changes.html
PR:		ports/186557
Exp-run by:	bdrewery

 

11:40 sunpoet 

- Update to 7.34.0

Changes:	http://curl.haxx.se/changes.html
PR:		ports/185456
Exp-run by:	bdrewery

 

23:04 delphij 

Apply vendor fix for CVE-2013-6422, cURL libcurl cert name check ignore
with GnuTLS.  Document the vulnerability fix in vuxml while I'm here.

 

10:07 sunpoet 

- Use PORTDOCS and PORTEXAMPLES
- Simplify Makefile

 

17:23 sunpoet 

- Strip shared library
- Use += for CONFIGURE_ENV

 

10:11 sunpoet 

- Fix build when both GSSAPI and SPNEGO options are on

When SPNEGO option is on, LOCALBASE/include/fbopenssl was added to the search
path of include files. It causes build failure when "#include <gssapi.h>" wants
/usr/include/gssapi/gssapi.h.

 

14:54 sunpoet 

- Fix PLIST
- Bump PORTREVISION for package change

PR:		ports/183388 [1]
Submitted by:	avilla [1]
Reported by:	antoine

 

02:03 hrs 

- Split the library part of multimedia/rtmpdump into multimedia/librtmp.
- Update ports depending on librtmp.
- Add instruction to avoid a build error in multimedia/rtmpdump under a
  specific condition.

 

15:31 sunpoet 

- Update to 7.33.0

Changes:	http://curl.haxx.se/changes.html
PR:		ports/183151
Exp-run by:	bdrewery

 

18:07 sunpoet 

- Convert to new LIB_DEPENDS format
- Convert to new options helper
- Remove --disable-threaded-resolver from CONFIGURE_ARGS, it is handled by
THREADED_RESOLVER option

 

17:36 sunpoet 

- Add SSP support

 

18:24 sunpoet 

- Fix STAGEDIR support

Reported by:	makc

 

18:36 sunpoet 

- Update to 7.32.0
- Turn COOKIES on by default
- Support STAGEDIR

Note:
- mk-ca-bundle.1 will not be installed. Use
http://curl.haxx.se/docs/caextract.html instead

Changes:	http://curl.haxx.se/changes.html
PR:		ports/181510
Exp run by:	drewery

 

17:23 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
ftp)

 

12:54 bdrewery 

SSP support has been added to ports with WITH_SSP for i386 and amd64
on FreeBSD 10, and amd64 on earlier versions.

SSP_UNSAFE is added to disable in a port if it fails to build, but
this should only be used in rare circumstances such as kernel modules.
Otherwise, the port may just be failing due to lack of respecting
LDFLAGS.

On FreeBSD 10, this uses an ldscript in /usr/lib/libc.so to pull in
libssp_nonshared.a to address issues linking on i386 [1].

On earlier FreeBSD versions the WITH_SSP knob will add -lssp_nonshared
to LDFLAGS on i386. This is not needed on amd64. However, several hundred
ports do not currently respect LDFLAGS, so this support is disabled currently
as it causes build failures if a dependency is looking for the stack_chk
symbols.

Many thanks to jlh@ for this as he had many years of patience in getting
all of the necessary pieces [1][2] in.

[1]
http://svnweb.freebsd.org/base/head/lib/libc/libc.ldscript?revision=251668&view=markup

PR:		ports/138228 [2]
Submitted by:	jlh (bsd.ssp.mk based on)
Reviewed by:	bapt
With hat:	portmgr
exp-runs done:	37 over a month on 91i386,91amd64,10i386,10amd64

 

22:13 sunpoet 

- Disable CFLAGS=-D* check temporarily: workaround for LDAP issue [1] and
CPUTYPE [2]
- Remove note in pre-configure: since it does not help to avoid bug-report mails

PR:		ports/177401 [1], ports/180648 [1], ports/180944 [2]

 

14:08 sunpoet 

- Convert to new perl framework

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

16:39 sunpoet 

- Add note about LDAP issue (-DLDAP_DEPRECATED)

PR:		ports/177401

 

03:35 sunpoet 

- Fix ossl_recv() to eliminate false positive OpenSSL errors
- Bump PORTREVISION for package change

Submitted by:	Brett Gmoser <bgmoser@leadbidinc.com>, Sergey Lobanov
<wmn@siberianet.ru>
Obtained from:	https://github.com/bagder/curl/commit/8a7a277c086199b
Reference:	http://sourceforge.net/p/curl/bugs/1249/

 

09:02 sunpoet 

- Fix build when security/openssl is installed
- Pet portlint

 

08:12 sunpoet 

- Fix typo

Submitted by:	Herbert J. Skuhra <hskuhra@eumx.net>

 

16:26 sunpoet 

- Update to 7.31.0
- Bump PORTREVISION for ftp/curl shlib change
- Add TEST_DEPENDS
- Convert to new options framework
- Adjust options:
  - Add COOKIES
  - Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]
  - Add GSSAPI and SPNEGO [2]
  - Remove KERBEROS4
  - Rename LIBIDN to IDN
  - Remove TRACKMEMORY [1]
- Sort option handler
- Add SLAVEDIRS: ftp/curl-hiphop
- Cosmetic change
- Cleanup Makefile header
- While I'm here, fix typo (PORTREVSION) in x11-wm/ede/Makefile

Changes:	http://curl.haxx.se/changes.html
PR:		ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by:	Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by:	miwi

 

07:43 delphij 

Fix CVE-2013-2174 for ftp/curl with a patch from vendor for
now so that users can build the port, per popular demands
on mailing list.

The upgrade patch found in ports/172325 is currently under
exp-run.  The changes in this commit against ftp/curl can be
safely reverted before applying that patch, as it's shipped
with new curl release.

Approved by:	portmgr (miwi)

 

01:32 bdrewery 

- Bump PORTREVISION for c-ares update. I had thought this was done
  and that the shlib change was missed. I was looking at the wrong
  port log.

Reported by:	miwi

 

00:16 bdrewery 

- Chase c-ares shlib update by removing the version

 

09:58 bapt 

Convert left unconverted ports in ftp to new options framework

 

13:04 eadler 

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

 

16:17 novel 

- Add UPDATING entry for gnutls update
- Chase shlib version bump for dependant ports

 

00:58 swills 

- Fix plist issue with slave curl-hiphop caused by last commit

Reported by:	pointyhat (via beat)
Pointyhat to:	swills

 

20:45 swills 

- Install the autoconf file for libcurl

PR:		ports/171260
Approved by:	maintainer timeout (sunpoet, >2 weeks)

 

12:14 sunpoet 

- Prepare for slave port ftp/curl-hiphop

PR:		ports/169946
Submitted by:	mm

08:05 sunpoet 

- Update to 7.24.0

Changes:        http://curl.haxx.se/changes.html

16:48 sunpoet 

- Take maintainership

Approved by:    roam (maintainer, implicit)

15:26 miwi 

- Remove WITH_FBSD10_FIX, is no longer needed

09:48 beat 

- Fix build on FreeBSD 10

Approved by:    portmgr (miwi)

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

18:43 novel 

Chase security/gnutls update and add an UPDATING entry.

08:40 wen 

- Bump PORTREVISION to chase the update of dns/libidn

20:04 roam 

Update cURL to 7.21.3 and fix its librtmp detection.  In the process:
- disable the -Werror build option by popular demand
- do not override the user's debug and optimization settings

PR:             150854 (the debug and optimization CFLAGS)
Reported by:    Anonymous <swell.k@gmail.com>

21:05 roam 

Update to curl-7.21.1; in the process:
- add a knob for the compiler's -Werror checking, on by default
- add a knob for RTMP streams support
- reflect reality: actually disable the diagnostic memory tracking
  if the user has turned the knob off!
- fix a bashism in the configure script
- remove two patches to the test framework that were integrated upstream

22:32 pgj 

- Make run dependency on security/ca_root_nss optional

PR:             ports/149368
Submitted by:   pgj
Approved by:    roam (maintainer timeout)

12:33 roam 

Update to curl-7.20.1 and specify the MIT license.

10:39 roam 

Update to curl-7.20.0.

10:59 roam 

Now that c-ares-1.7.0 is in the tree, cURL can, at long last,
use c-ares for asynchronous DNS lookups while supporting IPv6!

11:09 roam 

Fix the build of dependent ports by including <sys/select.h> on
earlier FreeBSD versions.  I've modified the PR patch slightly to
make it a bit more portable so it was suitable for forwarding upstream :)
Bump PORTREVISION.

PR:             141459
Submitted by:   garga

11:46 roam 

Update to curl-7.19.7.

00:20 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with E,F

18:04 novel 

Bump PORTREVISIONs of the gnutls dependant ports to chase gnutls update.

13:41 roam 

Update the cURL port to 7.19.6.

12:10 roam 

Well, yeah, leave it to me to test an update and all dependent ports,
notify maintainers, wait for a couple of days, and then only commit
the update itself, leaving the dependent ports un-updated :(

Bump the shared lib dependency on ports touched by the c-ares update.

Pointy hat to:  roam (myself)

13:43 roam 

Update to curl-7.19.5.

11:55 pav 

- Mark MAKE_JOBS_SAFE

PR:             ports/133003
Submitted by:   mm
Approved by:    maintainer timeout (roam; 1 month)

03:57 roam 

Update to curl-7.19.4, which fixes a redirection vulnerability.
The changes in the patch files are almost the same as in Eugene's PR,
although I arrived at them mostly independently :)
Reformat all patch files now that I use quilt to manage them.
Fix two complaints from portlint: needless use of CFLAGS and differentiation
between NOPORTDOCS and NOPORTEXAMPLES.  Thanks, Eugene!

PR:             132358
Submitted by:   Eygene Ryabinkin <rea-fbsd@codelabs.ru>

02:11 roam 

Apply a band-aid to fix the build without proxy support.
Note that some of the tests shall fail for the present.

15:40 roam 

At long last, update the curl port to its almost-current version, 7.19.2.
Yes, there's been a new 7.19.3 version for a couple of days now,
but I figure you folks have been waiting for me much too much as it is :(
Apologies all around!

Prompted by:    several PR's and more people (and portmgrs) than I dare admit

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

14:11 roam 

Argh.  The cURL build requires Perl.

PR:             123050
Reported by:    Chess Griffin <chess@chessgriffin.com>
Pointy hat to:  roam (myself)

11:33 roam 

Update to curl-7.18.0.

11:57 novel 

- Chase security/gnutls shlib version bump
- Add an entry to UPDATING

15:44 roam 

Update to curl-7.16.3.
Fix the (still present in 7.16.3) libssh2 problems, at least so that
cURL works with the libssh2 0.17 in our ports tree.

PR:             114215 (the basic update)
Submitted by:   pesho.petrov@gmail.com

09:36 rafan 

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

09:05 roam 

Actually, at least this version of cURL sometimes breaks with the new
libssh2, and fails to connect.  Mark the libssh2 usage as broken until
I figure out what is the matter.  And yep, David Thiel did inform me
in advance about his plans to update libssh2, and I did not check then.

18:55 pav 

- Chase libssh2 update

PR:             ports/114474
Submitted by:   Vaclav Haisman <v.haisman@sh.cvut.cz>
Pointy hat to:  lx

08:56 novel 

Chase gnutls shared library version chase: adjust DEPENDS lines and
bump PORTREVISIONs.

14:45 roam 

Update to curl 7.16.1, loosely based on the PR.  Also:
- add a LIBSSH2 option for SCP and SFTP support using security/libssh2;
- add a patch from the cURL CVS repository to fix an expired cookie in
  test 62.

PR:             109670
Submitted by:   Eygene Ryabinkin <rea-fbsd@codelabs.ru>

08:54 novel 

- Chase security/gnutls update
- Add an entry to UPDATING
- Pet portlint(1) for some ports while I'm here

12:41 roam 

Update the ftp/curl port to 7.16.0.
Bump PORTREVISION of all dependent ports.
Fix the build errors in the few ports that still use the long deprecated,
and now obsoleted, cURL options.

Thanks to everyone who took the time to look over the patch!

Discussed on:   -ports

17:07 roam 

If c-ares support is requested, properly depend on the shared c-ares
library now that dns/c-ares installs it.  This should, among other
things, fix the build of libcurl on amd64.

Reported by:    girgen

12:46 roam 

Update to cURL 7.15.5 and integrate Scot Hetzel's patch for
really making OpenSSL support optional.  Now OpenSSL and GnuTLS
are on level ground, both controlled by the OPTIONS setting.
Fortunately, it turned out that the curl_multi_socket() API change
does not affect any of the ports that use ftp/curl.

PR:             102871, 103126
Submitted by:   pav, vd, Scot Hetzel <swhetzel@gmail.com>

07:11 roam 

Add an explicit knob for c-ares support now that we have Daniel's version
of the ares library in the ports tree.  The knob defaults to "off" since
it conflicts with curl's IPv6 support - which is now also configurable via
its own knob.
PORTREVISION not bumped since there is no change in the default package
build - if enough people consider asynchronous DNS resolving to be good,
it could become the default, but for the present it is not.

08:54 roam 

Update to 7.15.4, mostly by Vasil Dimov's PR.
In addition, OPTIONS'ify everything but OpenSSL support.

PR:             99050
Submitted by:   vd

11:09 edwin 

Remove USE_REINPLACE from all categories starting with F

12:49 vd 

Update from 7.15.1 to 7.15.3

PR:             ports/94727
Submitted by:   vd
Approved by:    secteam (simon)
Security:       http://curl.haxx.se/docs/adv_20060320.html

16:34 novel 

Chase gnutls update.

12:10 mnag 

Update to 7.15.1 [1]
Reorganize Makefile

PR:             90079 [1]
Submitted by:   Vasil Dimov <vd@datamax.bg>
Approved by:    maintainer timeout (security 1 day, simon with secteam hat)
Security:       http://curl.haxx.se/docs/adv_20051207.html
                http://secunia.com/advisories/17907/

18:52 pav 

Move IDN related ports from devel to dns category:

  devel/libidn -> dns/libidn
  devel/p5-Net-LibIDN -> dns/p5-Net-LibIDN

Approved by:    both maintainers
Repocopy by:    marcus

16:11 roam 

Update to 7.15.0, which contains a security fix, among other changes.

PR:             87393
Submitted by:   Vasil Dimov <vd@datamax.bg>
Security:       http://curl.haxx.se/docs/security.html#BID15102

20:22 roam 

A forced commit to note that the exactly same update was also submitted in

PR:             85660
Submitted by:   Vasil Dimov <vd@datamax.bg>

18:12 roam 

Update to 7.14.1.

19:31 pav 

- Update to 7.14.0
- Provide WITH_GNUTLS knob to replace OpenSSL with GnuTLS

PR:             ports/81195
Submitted by:   Vasil Dimov <vd@datamax.bg>
Approved by:    maintainer timeout (18 days)

20:33 krion 

Fix plist.
Portlint(1).
Bump PORTREVISION.

02:36 roam 

Update to curl 7.13.1, which also takes care of the recent security
issue.

16:06 roam 

Add libidn support, configurable with the WITH/WITHOUT_LIBIDN knob.
Add debugging support via the WITH_CURL_DEBUG knob.

Properly use LC_ALL=C instead of LANG=C to run the test suite
(thanks Fujishima-san!)