11:04 Nuno Teixeira (eduardo) 

games/opencity: Move man pages to share/man

Approved by:	portmgr (blanket)

    f6b57df

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

18:53 Kevin Bowling (kbowling) 

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

    da3162c

23:19 Dmitry Marakasov (amdmi3) 

Remove useless Created by: headers mentioning me

    5823922

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

22:16 zeising 

Add USES=xorg USES=gl, ports categories g

Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

14:34 linimon 

Fix build on gcc-based architectures:

  SharpPlus.h:24:3: error: #error "The GCC RTTI support is required."

Approved by:	portmgr (tier-2 blanket)

 

05:03 rezny 

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

 

11:00 amdmi3 

Remove always-true/false conditions after 9.x, 10.[12] EOL
While here, couple minor fixes

portmgr blanket

 

09:38 gerald 

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

 

09:04 amdmi3 

- Add missing LIB_DEPENDS
- Regenerate patches

 

16:20 amdmi3 

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

 

15:27 amdmi3 

- Update to 0.0.6.5

 

16:48 tijl 

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version.  When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.

Also remove the devel/pcre dependency from USE_GNOME=glib20.  It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it.  The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20.  Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.

PR:		195724
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

17:37 amdmi3 

- Strip binary

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

19:06 tijl 

- Convert net/sdl_net to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

Approved by:	portmgr (implicit, bump unstaged port)

 

21:11 amdmi3 

- Fix build on 10.x
- Convert USE_BZIP2 to USES

 

17:40 amdmi3 

- Remove DOCS, NLS and EXAMPLES from OPTIONS_DEFAULT in my ports, as suggested
by Porter's Handbook

 

23:52 amdmi3 

- Support staging

 

17:36 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
games)

 

15:28 bapt 

Add an explicit dependency on pkgconf

 

17:41 amdmi3 

- Mark with USE_GCC
- Remove obsolete patch and OSVERSION check

 

04:59 amdmi3 

- Trim header
- OptionsNG
- Fix OSVERSION check

 

05:26 dinoex 

- update png to 1.5.10

10:18 mva 

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

02:11 amdmi3 

- Update to 0.0.6.4

22:11 amdmi3 

- Fix build on -CURRENT

Reported by:    Sergey V. Dyatko <sergey dot dyatko at gmail dot com>

11:32 amdmi3 

- Update to 0.0.6.3

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

09:43 mva 

- Update devel/sdl12 to version 1.2.14.
- Update audio/sdl_mixer to version 1.2.11.
- Update graphics/sdl_gfx to version 2.0.20.
- Update graphics/sdl_image to version 1.2.10.
- Bump portrevisions for all ports depending on audio/sdl_mixer and
  graphics/sdl_image.
- Update Mk/bsd.sdl.mk accordingly for the new shared lib versions.

PR:             ports/142147 ports/142248 ports/142249
Approved by:    miwi (mentor implicit)

13:29 amdmi3 

- Update to 0.0.6.2

00:23 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with G

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

00:39 amdmi3 

- Update to 0.0.6.1

20:25 amdmi3 

- Add forgotten patch

20:22 amdmi3 

- Update to 0.0.6

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

09:09 amdmi3 

Fix docs installation (install man regardless of NOPORTDOCS).

Approved by:    miwi (mentor)
Reported by:    QA Tindy

17:28 amdmi3 

Update my email address in 132 ports.

Approved by:    miwi (mentor)

14:28 miwi 

- Chase devel/sdl12 shlib version bump

16:26 miwi 

OpenCity is a full 3D city simulator game project. It is written
in standard C++ with OpenGL and SDL from scratch. It is not intended
to be a clone of any famous city simulator from Max*s. So, if you
are looking to download a free SimCity 4 like, please forget OpenCity.

WWW: http://opencity.sourceforge.net

PR:             ports/119492
Submitted by:   Dmitry Marakasov <amdmi3 at amdmi3.ru>