Number of commits found XX: 23

graphics/py-pillow: Update to 7.0.0

* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
  backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
  dropped the support for Python 2.

* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
  consumers that can be built for Python 2 or newer.

* Exceptions are ports that can be built only for either Python 2 or
  Python 3.  For the first case, consumers are just assigned to the
  repo-copied graphics/py-pillow6.

* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
  listed in setup.py as a build dependency [1] and relax the version

(Only the first 15 lines of the commit message are shown above )

Deprecate some pygtk2 ports

With hat:	portmgr

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

games/pythonsudoku: Change DEPENDS from py-reportlab1 to py-reportlab

- Modernize OPTIONS

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

(Only the first 15 lines of the commit message are shown above )

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters

(Only the first 15 lines of the commit message are shown above )

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

Split devel/gettext in devel/gettext-runtime and devel/gettext-tools.  The
first contains runtime libraries such as libintl and the latter contains
developer tools such as msgfmt.  Ports that use gettext will usually need
a LIB_DEPENDS on gettext-runtime and a BUILD_DEPENDS on gettext-tools.

USES=gettext-runtime can be used to set a LIB/BUILD/RUN_DEPENDS on
devel/gettext-runtime and USES=gettext-tools can be used to set a
BUILD/RUN_DEPENDS on devel/gettext-tools.  USES=gettext is now the same
as "USES=gettext-runtime gettext-tools" meaning a LIB_DEPENDS on
devel/gettext-runtime and a BUILD_DEPENDS on devel/gettext-tools.

Update gettext to 0.19.3.

Remove :oldver from converters/libiconv and devel/gettext-runtime.  Leave
symlinks with the old library versions to avoid the need to bump
PORTREVISION on a large number of dependent ports.  When most of the
dependent ports have had normal version updates, PORTREVISION can be
bumped on the remaining ones (low number) and the links can be removed.

Fix some ports that installed files in lib/locale instead of share/locale.

PR:		194038
Reviewed by:	bapt
Exp-run:	antoine
Approved by:	portmgr (antoine)

- Release ports maintained by games@

games@ team is quite small and inactive, so ports currently assigned
to it cannot be assumed as properly maintained. To not cause confusion
by making it look otherwise, and also to allow and promote adoption
by individual maintainers, release these ports back to the pool. Note
that this does not change the fact that games@ team still takes care
of these ports to excent of its capabilities.

Suggested by:	marino

- Clarify LICENSE
- Add LICENSE_FILE
- Convert to USES=python
- Simplify docs installation

games/pythonsudoku: switch from py-imaging to py-pillow

- USES python

With hat:	python
Approved by:	portmgr (bdrewery, implicit)

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

games/dcross

- Transfer maintainership to games@ team

games/openbubbles

- Mastersite disappeared, mirror on my SF site
- Transfer maintainership to games@ team
- Use tar:bzip2 instead of USE_BZIP2=yes
- Don't silence warnings
- Change WWW to WayBack

games/pythonsudoku

- Transfer maintainership to games@ team

games/robocalypto

- Transfer maintainership to games@ team

games/sudoku-sensei

- Transfer maintainership to games@ team

- Bump PORTREVISION for dependency change
- Use tar:bzip2 instead of USE_BZIP2=yes
- Remove TODO from DOCS
- Change Desktop entry file
- Use NLS_USES=gettext:run instead of NLS_USES=gettext
- Change REINPLACE, cosmetical changes
- Break lines around 80 characters
- Simplify DOCS installation handling

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

- Repocopy print/py-reportlab to print/py-reportlab1
  to preserve version 1.x and to update to 3.0

  print/py-reportlab:
    - Update print/py-reportlab to 3.0 based on print/py-reportlab2
    - Support STAGEDIR
    - Use PYDISTUTILS_AUTOPLIST
      * Remove pkg-plist, accordingly
    - Set CONFLICTS
    - Add PORTSCOUT
    - Replace tab with a single space after WWW: in pkg-descr

  print/py-reportlab1:
    - Support STAGEDIR
    - Add PKGNAMESUFFIX not to duplicate ports with the same name

(Only the first 15 lines of the commit message are shown above )

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

Python Sudoku is a text and graphical program (gtk interface) to create or
resolve sudokus. It can also print a sudoku (1 or 4 sudokus in each page)
and write an image (png, jpeg, etc) with a sudoku.

WWW: http://pythonsudoku.sourceforge.net/

PR:		ports/171332
Submitted by:	nemysis (self)
Approved by:	wg (mentor)

Number of commits found XX: 23

18 vulnerabilities affecting 99 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2020-06-05 11:54:25