| non port: games/quakeforge/Makefile |
|
SVNWeb
|
Number of commits found: 103 (showing only 100 on this page) |
|
Tue, 25 Apr 2023
|
[ 15:17 Christian Weisgerber (naddy)  ]    feb1fa3 (Only the first 10 of 1613 ports in this commit are shown above.  )
audio/opus: bump consumers after update to 1.4
|
|
Thu, 8 Sep 2022
|
[ 15:43 Stefan Eßer (se) ] 986beaa (Only the first 10 of 174 ports in this commit are shown above. )
Move more WWW entries from pkg-descr files into Makefiles
The WWW: lines in the pkg-descr files of these ports where not at the
end of those files and have been missed in prior conversion runs.
Approved by: portmgr (implicit)
|
|
Wed, 20 Jul 2022
|
[ 14:21 Tobias C. Berner (tcberner) ] d56127b (Only the first 10 of 744 ports in this commit are shown above. )
games: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <benlutz@datacomm.ch>
* <janos.mohacsi@bsd.hu>
* Aaron Baugher
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron VonderHaar <avh4@usa.net>
* Aaron Zauner <az_mail@gmx.at>
* Adam Kranzel (adam@alameda.edu)
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org> (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 2 Aug 2021
|
[ 16:03 Yuri Victorovich (yuri) ] 5708ae4 (Only the first 10 of 166 ports in this commit are shown above. )
audio/jack: Update to Jack2: 0.125.0 -> 1.9.16
Big thank you to Florian Walpen <dev@submerge.ch> and
Goran Mekić <meka@tilda.center> for working on Jack2.
PR: 251125
Submitted by: Florian Walpen <dev@submerge.ch> (original version)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 14 Nov 2019
|
[ 12:39 tobik ]   (Only the first 10 of 68 ports in this commit are shown above. )
Add USES={gl,gnome,mate,sdl,xorg} missed in the last round
|
|
Thu, 7 Nov 2019
|
[ 14:16 tobik ]
Do not set CLIENTS?_USES twice
Also drop misspelled CLIENTS_VERS in games/quakeforge. It probably
was meant to be CLIENTS_VARS but the port does not use Gtk so
INSTALLS_ICONS=yes should not be set anyway.
|
|
Tue, 5 Nov 2019
|
[ 22:21 zeising ] (Only the first 10 of 36 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories e and g
Add USES=xorg and USES=gl to ports in categories starting with 'e' and 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Fri, 21 Dec 2018
|
[ 14:12 rene ]
games/quakeforge: remove optional dependency on expired multimedia/xmms
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Wed, 26 Sep 2018
|
[ 16:12 emaste ]
Add -znotext to LDFLAGS on i386, for lld
These ports link some non-PIC code, which fails with lld as it defaults
to disallowing relocations against read-only segments. For i386 we can
just add -znotext unconditionally: for GNU BFD ld it just affirms BFD's
existing default.
PR: 214864
Approved by: portmgr (lld blanket)
Sponsored by: The FreeBSD Foundation
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Tue, 23 May 2017
|
[ 05:03 rezny ] (Only the first 10 of 711 ports in this commit are shown above. )
Revision bump of all ports with USE_GL after consolidation of mesa-libs
Approved by: swills (mentor)
Differential Revision: https://reviews.freebsd.org/D10845
|
|
Fri, 21 Apr 2017
|
[ 14:16 amdmi3 ]
- Fix shebangs
- Add missing python dependency
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Sun, 20 Nov 2016
|
[ 09:38 gerald ] (Only the first 10 of 364 ports in this commit are shown above. )
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
|
|
Mon, 9 May 2016
|
[ 13:43 mat ] (Only the first 10 of 25 ports in this commit are shown above. )
Update to 0.7.2
PR: 209296
Submitted by: tkato432 yahoo com
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Tue, 12 Jan 2016
|
[ 16:20 amdmi3 ] (Only the first 10 of 791 ports in this commit are shown above. )
Convert LICENSE= "GPLxx # or later" to "GPLxx+"
Approved by: portmgr blanket
|
|
Mon, 9 Nov 2015
|
[ 14:30 amdmi3 ] (Only the first 10 of 17 ports in this commit are shown above. )
Remove support for WANT_SDL/HAVE_SDL knobs
WANT_SDL/HAVE_SDL macros allowed a port to check which SDL components
are installed. This goes against the policy of avoiding automatic
dependencies, and there are actually no cases in the portstree where
these knobs are used properly, so axe them out.
Approved by: portmgr (mat)
Differential Revision: D4093
|
|
Thu, 25 Dec 2014
|
[ 20:54 bapt ] (Only the first 10 of 446 ports in this commit are shown above. )
Bump portrevision after png update
|
[ 19:04 antoine ] (Only the first 10 of 332 ports in this commit are shown above. )
Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade
|
|
Sat, 13 Dec 2014
|
[ 06:31 amdmi3 ]
- Clarify LICENSE
- Add LICENSE_FILE
- Drop @dirrm* from plist
|
|
Mon, 8 Dec 2014
|
[ 16:48 tijl ] (Only the first 10 of 920 ports in this commit are shown above. )
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used. (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 11 Sep 2014
|
[ 11:06 tijl ]
- Convert to USES=libtool and add INSTALL_TARGET=install-strip
- Stop trying to build libQFrenderer_sw as a shared library. The library
contains x86 asm that does not support PIC. It looks like this asm can
be disabled by adding -DPIC to the command line but doing so leads to
build errors.
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Mon, 1 Sep 2014
|
[ 13:25 danfe ]
In preparation to update QuakeForge to the latest version, unbreak, stagify,
and clean up the port beforehand:
- Require compiler that supports nested functions
- Do not enable extra compiler optimizations by default; they're known to be
the cause of sporadic build and run-time failures
- Make snd_oss actually work: mmap()ped buffer for the DMAing into /dev/dsp
was set up incorrectly. FreeBSD always requires MAP_SHARED for device
mappings
- Remove vestiges of Tier-2 (sparc64) and dropped (alpha) arch gimmicks
- Define LICENSE (GPLv2), miscellaneous cleanups
- Transfer maintainership to games@ while here as well
Submitted by: kib (sound fix)
|
|
Mon, 25 Aug 2014
|
[ 10:01 bapt ] (Only the first 10 of 12 ports in this commit are shown above. )
Reset maintainership for non staged ports
With hat: portmgr
|
|
Wed, 16 Jul 2014
|
[ 08:05 bapt ] (Only the first 10 of 12 ports in this commit are shown above. )
Fix non default LIB_DEPENDS
With hat: portmgr
|
|
Thu, 29 May 2014
|
[ 14:35 miwi ] (Only the first 10 of 36 ports in this commit are shown above. )
- Convert gmake, bzip to USES
Approved by: portmgr
|
|
Fri, 20 Sep 2013
|
[ 17:36 bapt ] (Only the first 10 of 1149 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
games)
|
|
Fri, 8 Mar 2013
|
[ 11:32 bapt ] (Only the first 10 of 209 ports in this commit are shown above. )
Convert USE_BISON to USES= bison
It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build
it brings bison as a run dependency in case it is set the following way:
USES= bison:run
it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both
While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix
|
|
Sat, 18 Feb 2012
|
[ 10:18 mva ] (Only the first 10 of 537 ports in this commit are shown above. )
- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions
Tested by: exp-run by pav
|
|
Mon, 14 Mar 2011
|
[ 16:47 danfe ] (Only the first 10 of 26 ports in this commit are shown above. )
Bring unmaintained Quake ports under my wing.
|
|
Sun, 27 Feb 2011
|
[ 04:54 tabthorpe ] (Only the first 10 of 147 ports in this commit are shown above. )
- Reassign ports to heap
Submitted by: alepulver
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sun, 6 Jun 2010
|
[ 20:44 naddy ] (Only the first 10 of 174 ports in this commit are shown above. )
Bump PORTREVISION for ports that depend on libogg, directly or indirectly
(via libvorbis, libtheora).
|
|
Sat, 22 Aug 2009
|
[ 00:23 amdmi3 ] (Only the first 10 of 415 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with G
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Mon, 6 Jul 2009
|
[ 21:26 naddy ] (Only the first 10 of 165 ports in this commit are shown above. )
Bump PORTREVISION after libogg and libvorbisfile major version increment.
|
|
Fri, 23 Jan 2009
|
[ 16:28 flz ] (Only the first 10 of 612 ports in this commit are shown above. )
- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Thu, 13 Mar 2008
|
[ 14:28 miwi ] (Only the first 10 of 442 ports in this commit are shown above. )
- Chase devel/sdl12 shlib version bump
|
|
Wed, 17 Oct 2007
|
[ 10:13 ade ] (Only the first 10 of 199 ports in this commit are shown above. )
Migration from bison 1.x to 2.x
PR: 117086
Tested by: -exp runs
|
|
Sat, 28 Jul 2007
|
[ 12:27 miwi ] (Only the first 10 of 128 ports in this commit are shown above. )
- Chase increase of audio/libvorbis shlib version.
- Bump PORTREVISION
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Thu, 1 Feb 2007
|
[ 02:42 kris ] (Only the first 10 of 348 ports in this commit are shown above. )
Use libtool port instead of included version to avoid objformat a.out botch
|
|
Fri, 29 Dec 2006
|
[ 21:32 alepulver ]
- Correctly disable the use of installed libraries if not selected in OPTIONS.
|
[ 21:12 alepulver ]
- Fix clients statically linked to libQFrenderer_sw being unable to load
console_client.so (the game menus) by making it a dynamic library [1].
- Change INSTALLS_SHLIB to USE_LDCONFIG.
- Remove STATIC_PLUGINS option.
- Bump PORTREVISION.
Reported by: scalopus@gmail.com
Obtained from: https://bugzilla.altlinux.org/show_bug.cgi?id=8853 [1]
|
|
Wed, 20 Sep 2006
|
[ 11:21 stas ] (Only the first 10 of 453 ports in this commit are shown above. )
- Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
structure (i.e. include/SDL for includes and sdl-config for configuration
binary)
- Update graphics/sdl_ttf to version 2.0.8
- Update graphics/sdl_image to version 1.2.5
- Update audio/sdl_mixer to version 1.2.7
- Update net/sdl_net to version 1.2.6
- Update Mk/bsd.sdl.mk accordingly
- Fix dependent ports to fit the new directory structure and avoid several
API breakages
- Bump up portrevisions for all dependent ports to allow them to be upgraded
by portupgrade/portmaster etc tools
Approved by: kris (portmgr), sem (mentor)
|
|
Wed, 12 Apr 2006
|
[ 22:15 alepulver ]
- Use NOT_FOR_ARCHS instead of BROKEN on sparc64.
- Remove USE_REINPLACE.
- Add pkg-message (processed by SUB_FILES).
- Run ldconfig on the right directory.
- Fix OPTIONS handling.
- Remove unavoidable autodetection of OPTIONS.
- Don't remove the shared data directory (managed by games/quake-data).
PR: ports/93729
Submitted by: Alejandro Pulver <alejandro@varnet.biz>
Approved by: garga (mentor)
|
|
Sun, 9 Apr 2006
|
[ 13:08 alepulver ] (Only the first 10 of 80 ports in this commit are shown above. )
Change the maintainership address to the @FreeBSD.org one.
Approved by: garga (mentor)
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Thu, 17 Nov 2005
|
[ 21:58 edwin ]
[patch] games/quakeforge does not respond to keyboard input
After ports recompilation for 6.0 (upgrade from 5-STABLE)
I noticed that quakeforge start and plays the demo, but
completely ignores any keyboard input. Besides that, it
reports that plugin /usr/local/lib/quakeforge/console_client.so
cannot be loaded.
Investigation had shown that the plugin is used to drive
the game menu, and the reason it cannot be loaded is that
the main executable of the game does not export the symbol
Key_Progs_Init.
Symbol is absent since build links final exe from some
static libraries, and .o with Key_Progs_Init is (for some(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 16 Nov 2005
|
[ 10:20 barner ]
Pass maintainership to alejandro@varnet.biz.
Submitted by: Ulrich Spoerlein <q@galgenberg.net> (old maintainer)
PR: ports/89105
|
|
Tue, 15 Nov 2005
|
[ 20:55 edwin ]
[UPDATE] games/quakeforge: minor changes, integrate with "games/quake-data"
Changes:
* Integrate with "games/quake-data".
* Change PORTNAME to lower-case.
* Add OPTIONS.
* Add LDCONFIG_DIRS.
* Remove SVGA client, pkg-message and patch (it doesn't work, as noted
in pkg-message).
(also SHA256 and maintainer change)
PR: ports/86175
Submitted by: Alejandro Pulver <alejandro@varnet.biz>
Approved by: Ulrich Spoerlein <q@galgenberg.net>
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Fri, 20 May 2005
|
[ 14:47 pav ]
- Add WITH_STATIC_PLUGINS, requested by Jurij Ivliev <yury@black.cat.kazan.su>
- Remove WITHOUT_TOOLS and WITHOUT_SERVERS
PR: ports/80940
Submitted by: Ulrich Spoerlein <q@galgenberg.net> (maintainer)
|
|
Fri, 13 May 2005
|
[ 20:17 thierry ] (Only the first 10 of 15 ports in this commit are shown above. )
Change maintainer address.
PR: ports/80973
Submitted by: Ulrich Spoerlein <q (at) galgenberg.net>
|
|
Tue, 12 Apr 2005
|
[ 03:26 obrien ] (Only the first 10 of 773 ports in this commit are shown above. )
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
|
|
Mon, 11 Apr 2005
|
[ 08:04 obrien ] (Only the first 10 of 776 ports in this commit are shown above. )
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
|
|
Fri, 20 Aug 2004
|
[ 19:50 pav ]
- Update to 0.55
PR: ports/70711
Submitted by: Ulrich Spoerlein <q@uni.de> (maintainer)
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Thu, 13 May 2004
|
[ 09:13 kris ]
BROKEN on sparc64: Does not compile
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Mon, 8 Mar 2004
|
[ 01:01 edwin ] (Only the first 10 of 54 ports in this commit are shown above. )
Properly use SDL everywhere:
USE_SDL=yes -> USE_SDL=sdl (good examles everywhere)
WANT_SDL/HAVE_SDL instead of exists(localbase/lib/lib...)
See
http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/using-sdl.html
for more information on how to use USE_SDL, WANT_SDL and HAVE_SDL.
PR: follow-ups of ports/55494, ports/61877
Submitted by: Edwin Groothuis <edwin@mavetju.org>
|
|
Wed, 4 Feb 2004
|
[ 05:21 marcus ] (Only the first 10 of 1588 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
|
|
Sun, 25 Jan 2004
|
[ 20:39 pav ]
- Fix the detection of libvorbis (broken, due to version bump)
- Fix a bug in the network code, found by Vladimir Machulsky
- Use DOCSDIR
- Bump PORTREVISION
PR: ports/61902
Submitted by: Ulrich Spoerlein <q@uni.de> (maintainer)
|
|
Tue, 20 Jan 2004
|
[ 21:18 krion ] (Only the first 10 of 40 ports in this commit are shown above. )
- Use new knobs from bsd.sdl.mk
Approved by: portmgr
|
|
Sat, 20 Dec 2003
|
[ 16:37 naddy ] (Only the first 10 of 23 ports in this commit are shown above. )
Catch up with libogg/libvorbis version bump.
|
|
Sun, 26 Oct 2003
|
[ 16:01 tom ]
Minor change: Remove a redundant warning and fix a typo.
|
|
Wed, 17 Sep 2003
|
[ 23:44 edwin ]
Chase multimedia/xmms library bump.
Submitted by: FUJISHIMA Satsuki <sf@FreeBSD.org>
Approved by: (unbreak of port builds)
|
|
Fri, 8 Aug 2003
|
[ 13:23 netchild ] (Only the first 10 of 14 ports in this commit are shown above. )
Update to 0.5.4.
Submitted by: maintainer
|
|
Thu, 26 Jun 2003
|
[ 14:19 daichi ]
Unbreak games/quakeforge on 5.1/alpha
PR: 53757
Submitted by: Ulrich Spoerlein <q@uni.de> (mainttainer)
|
|
Fri, 28 Mar 2003
|
[ 10:15 netchild ]
- change maintainer to q@uni.de (this time for sure)
- add patch for zpak (use sh instead of bash)
Submitted by: q@uni.de
- bump portrevision due to change in package (zpak)
|
|
Sat, 8 Mar 2003
|
[ 04:01 anholt ]
Fix fetching of quakeforge distfiles.
Approved by: portmgr
|
|
Fri, 28 Feb 2003
|
[ 22:53 kris ] (Only the first 10 of 38 ports in this commit are shown above. )
Use pre-everything:: instead of pre-everything: to avoid conflict with
targets in bsd.port.mk
|
|
Thu, 20 Feb 2003
|
[ 17:32 knu ] (Only the first 10 of 294 ports in this commit are shown above. )
De-pkg-comment.
|
|
Fri, 31 Jan 2003
|
[ 09:28 netchild ] (Only the first 10 of 15 ports in this commit are shown above. )
Update to 0.5.2.
Give maintainership to Ulrich Spoerlein <q@uni.de> from ports.
Submitted by: Ulrich Spoerlein <q@uni.de>
|
|
Thu, 2 Jan 2003
|
[ 15:06 sobomax ] (Only the first 10 of 75 ports in this commit are shown above. )
Update version number of SDL shared library.
|
|
Wed, 27 Nov 2002
|
[ 16:41 alane ]
Fixed to build with new stricter auto* rules.
Approved by: kris
|
|
Thu, 7 Nov 2002
|
[ 03:10 adamw ] (Only the first 10 of 193 ports in this commit are shown above. )
Fix PORTCOMMENTs that were killing INDEX builds.
105 pointy hats to: me
Approved by: pat
|
|
Wed, 19 Jun 2002
|
[ 13:25 pat ]
Reset maintainership.
PR: 39519
Submitted by: Daniel O'Connor <darius@dons.net.au> (previous maintainer)
|
|
Wed, 17 Apr 2002
|
[ 14:59 sobomax ]
- Fix the build broken by the last autoconf/automake overhaul;
- use devel/sdl12 instead of devel/sdl10 because the latter is doomed for
death.
|
|
Sun, 10 Feb 2002
|
[ 01:10 pat ]
Fix automake problems
|
|
Tue, 29 Jan 2002
|
[ 10:53 knu ] (Only the first 10 of 27 ports in this commit are shown above. )
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command; the ECHO
macro is set to "echo" by default, but it is set to "true" if make(1) is
invoked with the -s option while ECHO_CMD is always set to the echo command.
|
|
Sun, 6 Jan 2002
|
[ 06:57 will ]
Force use of autoconf 2.13.
|
[ 06:20 will ] (Only the first 10 of 40 ports in this commit are shown above. )
First round of auto* cleanups: - USE_AUTO* -> USE_AUTO*_VER=* where required
- USE_AUTO* / *_DEPENDS=.*auto*:*/devel/auto* -> GNU_CONFIGURE where OK -
Other minor changes to fix things
|
|
Tue, 30 Oct 2001
|
[ 12:53 sobomax ]
Fix the port: GNU autoheader now called `autoheader213', not just
`autoheader'.
|
[ 09:19 obrien ]
Explicity run aclocal and autoheader
|
|
Tue, 5 Jun 2001
|
[ 18:51 sobomax ]
Unbroke.
|
|
Thu, 31 May 2001
|
[ 23:53 ade ]
Replace explicit build dependency on automake with USE_AUTOMAKE knob
|
|
Mon, 9 Apr 2001
|
[ 12:55 sobomax ] (Only the first 10 of 65 ports in this commit are shown above. )
Move: devel/sdl --> devel/sdl10 devel/sdl-devel --> devel/sdl12
|
|
Fri, 26 Jan 2001
|
[ 16:55 sobomax ]
Respect SDL_CONFIG like others SDL-based ports do.
|
|
Tue, 16 Jan 2001
|
[ 17:33 sobomax ] (Only the first 10 of 365 ports in this commit are shown above. )
Massive style enforcement - use ^I instead of spaces for variables identation.
|
|
Sun, 8 Oct 2000
|
[ 11:23 asami ] (Only the first 10 of 400 ports in this commit are shown above. )
Change PKGDIR from pkg/ to . Also fix places where ${PKGDIR} is spelled out
(many of which are ${PKGDIR}/MESSAGE -> ${PKGMESSAGE} type fixes that
shouldn't have been necessary) and the string "/pkg/" appear.
|
[ 02:28 asami ]
Move PLIST.* to pkg-plist.*.
|
Number of commits found: 103 (showing only 100 on this page) |
As an Amazon Associate I earn from qualifying purchases.