notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
NOTE: the WWW: line in pkg-descr was relocated to a WWW= line in Makefile. Each port in FreshPorts has a homepage link. Look for it right after the Description: on each port's home page.

Do I know someone who can pick up a server from 7401 E. Ben White Blvd. Austin TX?

The emphasis is on know, or recommended by someone I know. This is the original FreshPorts server, way past useful: RAID, 8GB RAM, etc. The drives need to be wiped and everything recycled.
non port: graphics/R-cran-GDD/Makefile
SVNWeb

Number of commits found: 24

Wed, 7 Sep 2022
[ 21:10 Stefan E├čer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 20 Jul 2022
[ 14:22 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:022e658bd10b8753ede87b3dfda087efabddac98  commit hash:022e658bd10b8753ede87b3dfda087efabddac98  commit hash:022e658bd10b8753ede87b3dfda087efabddac98  022e658  (Only the first 10 of 771 ports in this commit are shown above. View all ports for this commit)
graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Mon, 4 May 2020
[ 21:31 dinoex search for other commits by this committer ] Original commit   Revision:533989 (Only the first 10 of 72 ports in this commit are shown above. View all ports for this commit)
- update libgd to 2.3.0
- new option RAQM
- resurrect deprecated gdlib-config
- bump dependend ports
Fri, 26 Jul 2019
[ 20:46 gerald search for other commits by this committer ] Original commit   Revision:507372 (Only the first 10 of 3853 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330
Wed, 12 Dec 2018
[ 01:35 gerald search for other commits by this committer ] Original commit   Revision:487272 (Only the first 10 of 3168 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590
Sat, 10 Mar 2018
[ 17:46 gerald search for other commits by this committer ] Original commit   Revision:464084 (Only the first 10 of 1104 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).
Sun, 18 Jun 2017
[ 18:09 dbn search for other commits by this committer ] Original commit   Revision:443845 (Only the first 10 of 79 ports in this commit are shown above. View all ports for this commit)
qa: add check for NO_ARCH

If NO_ARCH is set then check that no FreeBSD elf(5) files are in $STAGEDIR.
If an elf(5) file is bundles as part of the package, but is not meant to be
run directly (i.e. the elf(5) file is a payload, and not compiled) then
those files can be added to NO_ARCH_IGNORE to avoid the check from failing,

Changes to ports:
 - Ports that have NO_ARCH set, but actually compile files have had NO_ARCH
   removed.
 - Ports that have elf(5) payloads have had those files added to
   NO_ARCH_IGNORE.
 - R-cran ports that do not set USES=cran:compiles have NO_ARCH set,

PR:		218976
Reviewed by:	antoine, mat
Approved by:	portmgr
Thu, 8 Dec 2016
[ 16:07 tijl search for other commits by this committer ] Original commit   Revision:428132 (Only the first 10 of 35 ports in this commit are shown above. View all ports for this commit)
Remove libtiff.so.4 compatibility links that were added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.
Fri, 1 Apr 2016
[ 14:00 mat search for other commits by this committer ] Original commit   Revision:412346 (Only the first 10 of 5103 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
Wed, 10 Sep 2014
[ 20:50 gerald search for other commits by this committer ] Original commit   Revision:367888 (Only the first 10 of 3171 ports in this commit are shown above. View all ports for this commit)
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)
Mon, 10 Mar 2014
[ 20:55 gerald search for other commits by this committer ] Original commit   Revision:347809 (Only the first 10 of 1081 ports in this commit are shown above. View all ports for this commit)
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)
Sat, 28 Dec 2013
[ 10:28 dbn search for other commits by this committer ] Original commit   Revision:337846 (Only the first 10 of 121 ports in this commit are shown above. View all ports for this commit)
Convert Mk/bsd.cran.mk to the Uses framework.

PR:		ports/184699
Reviewed by:	bapt
Approved by:	portmgr (bdrewery), wen (maintainer, timeout > 2 weeks)
Wed, 27 Nov 2013
[ 18:56 dbn search for other commits by this committer ] Original commit   Revision:335044 (Only the first 10 of 119 ports in this commit are shown above. View all ports for this commit)
Add stage support to Mk/bsd.cran.mk and all USE_R_MOD ports (aka R-cran-*).

Since this patch converts all affected ports, bsd.cran.mk no longer supports
NO_STAGE and errors out if NO_STAGE is set.

Exp-run:	ports/184216
Reviewed by:	bdrewery
Approved by:	portsmgr, wen
Wed, 13 Nov 2013
[ 08:19 bf search for other commits by this committer ] Original commit   Revision:333659 (Only the first 10 of 130 ports in this commit are shown above. View all ports for this commit)
Update math/R to 3.0.2 patched r64207 and math/R-cran-SuppDists to 1.1-9.1;
adjust dependent ports

Reviewed by:	pfg, thierry, tota
Sat, 26 Oct 2013
[ 00:52 gerald search for other commits by this committer ] Original commit   Revision:331644 (Only the first 10 of 1147 ports in this commit are shown above. View all ports for this commit)
Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 20 Sep 2013
[ 18:35 bapt search for other commits by this committer ] Original commit   Revision:327733 (Only the first 10 of 1084 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
Fri, 9 Aug 2013
[ 14:05 dinoex search for other commits by this committer ] Original commit   Revision:324437 (Only the first 10 of 86 ports in this commit are shown above. View all ports for this commit)
- update libdg to 2.1.0
Tue, 28 May 2013
[ 15:15 bf search for other commits by this committer ] Original commit   Revision:319316 (Only the first 10 of 140 ports in this commit are shown above. View all ports for this commit)
Update math/R to 3.0.1-patched, and adjust dependent ports;
synchronize math/rpy with upstream repository

Reviewed by:	wen
Approved by:	wen, tota
Thu, 7 Mar 2013
[ 04:21 bf search for other commits by this committer ] Original commit   Revision:313562 (Only the first 10 of 116 ports in this commit are shown above. View all ports for this commit)
update math/R to 2.15.3, and adjust dependent ports
Fri, 4 Jan 2013
[ 17:51 bf search for other commits by this committer ] Original commit   Revision:309935 (Only the first 10 of 116 ports in this commit are shown above. View all ports for this commit)
update the R base ports to 2.15.2 and adjust dependent ports

Reviewed by:	thierry, tota, wen
Wed, 29 Aug 2012
[ 15:16 skreuzer search for other commits by this committer ] Original commit 
Add graphics/gd as a build and runtime dependency

Submitted by:	Beat Gaetzi <beat@freebsd.org>
Wed, 22 Aug 2012
[ 15:39 skreuzer search for other commits by this committer ] Original commit 
Define DISTVERSION instead of PORTVERSION
[ 13:59 skreuzer search for other commits by this committer ] Original commit 
GDD is a graphics device for R which uses libgd for creating bitmap output.
Supported output formats are png8, png24, gif and jpeg.

The main purpose of this package is to replace png/jpeg and similar native
devices in R which either rely on X11 or use GhostScript are thus are very slow
and not suitable in server applications. GDD also supports advanced features
such as anti-aliasing of both lines and text.

WWW:	http://www.rosuda.org/R/GDD/

Number of commits found: 24