Number of commits found XX: 62

Sprinkle more USES=xorg

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

- Fix license
- Switch to USES=localbase
- Fix hidden dependency on devel/libslang2 [1]
- Add separate option for each supported driver (X11, NCURSES, SLANG)
- Sort plist

PR:		231044 [1]
Reported by:	dclarke@blastwave.org [1]

Set MAKEINFO to the full path of makeinfo when USES=makeinfo is set.

PR:		221027
Reviewed by:	mat
Approved by:	portmgr (antoine)

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

graphics/aalib: LDFLAGS+= -L${LOCALBASE}/lib (for ports ncurses)

Cleanup DIST* variables.

When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup

With hat:	portmgr
Sponsored by:	Absolight

- Remove libtool hacks and patches that are now handled by USES=libtool
- Remove CONFIG_SHELL from CONFIGURE_ENV because bsd.port.mk handles that

- Strip library

- Drop .la files, no dependees require them

Approved by:	portmgr blanket

Return some ports I maintain to the pool.

Fix build on system built WITHOUT_INFO

With hat:	portmgr

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

(Only the first 15 lines of the commit message are shown above )

graphics/aalib:	add license information

PR:	ports/185085
Submitted by:	Hardy Schumacher <hardy.schumacher@gmx.de>

Correctly apply the patch I committed.

PR:		ports/186660
Submitted by: 	Christoph Moench-Tegeder <cmt@burggraben.net>

graphics/aalib: fix build with new texinfo

PR:		ports/186660
Submitted by: 	Christoph Moench-Tegeder <cmt@burggraben.net>

Convert to USES=libtool

- Since aalib contains an X11 option, it should also set it in OPTIONS_DEFINE

Reported by:	mat

- Convert to staging.  This caught a missing pkg-plist entry.

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Remove now excess verbiage.

Reviewed by:	bapt

Convert USE_NCURSES by USES=ncurses
Convert USE_READLINE by USES=readline

Clean up my ports (and a couple of ports@ owned ones):

- Fix COMMENT
- Add MAKE_JOBS_SAFE where appropriate
- Change ordering of LICENSE lines
- Fix new header format
- Etc.

Reviewed by:	drogoh (on irc)

Convert to OptionsNG

Feature safe:	yes

Trim the headers in the ports I maintain.

Fix typos in COMMENT

Approved by:	portmgr@ (implicit)

Take

Add USE_NCURSES

PR:             157138
Submitted by:   Raphael Kubo da Costa <kubito@gmail.com>

Sync to new bsd.autotools.mk

Fix syntax warning in aalib.m4.

PR:             145220
Submitted by:   Grzegorz Blach <magik@roorback.net>
Feature safe:   yes

- Switch SourceForge ports to the new File Release System: categories starting
with G

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Free most of my ports, since they aren't being maintained to a
reasonable standard.

- Fix fetch

Reported by:    pointyhat's -fetch-original run

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

[DEPS] graphics/aalib USE_XLIB -> USE_XORG

        This port requires only USE_XORG= x11
        (tested with tinderbox)

PR:             ports/115464
Submitted by:   Martin Matuska <mm@FreeBSD.org>
Approved by:    maintainer timeout

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Use libtool port instead of included version to avoid objformat a.out botch

Switch to my @FreeBSD.org address.

Approved by:    ahze (mentor)

Pass maintainership to submitter

PR:             ports/97747
Submitted by:   Shaun Amott <shaun at inerd.com>

Remove USE_REINPLACE for categories starting with a G

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

use INFO macro

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

change the libtool version to use from 1.3 to 1.5

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

de-pkg-comment

PERL -> REINPLACE_CMD

PR:             39938
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

use WITHOUT_X11 instead of WITH_X11
bump PORTREVISION

Update to 1.4.r5    

Fix a building error.   Don't update the timestamp of "${WRKSRC}/acconfig.h".   

Re-added workaround (see 1.18) to prevent intermittent failures   depending on
where the distfile was fetched.    

Fixed MASTER_SITES and WWW. USE_AUTOMAKE made redundant.    

Use random() because rand() is just too lame   Fix a potential buffer overflow I
noticed while in here   Bump PORTREVISION    

Bump PORTREVISION, since patch-af changes the package.    

There are two different tarballs for aalib-1.2 on the internet.   There is one
copy on the author's ftp site.   There is a differnt copy on all the SunSite
mirrors.    

Add MASTER_SITE_SUNSITE (recent fennerism).    

Fix MASTER_SITES; use USE_AUTOMAKE; add WWW.    

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

Fix MASSIVE typo INSTALL_SHLIBS --> INSTALLS_SHLIBS, which occured because I  
just cun'n'pasted the name from Satoshi's commit message without checking   it. 
  

Second round of INSTALL_SHLIBS=yes fixes.    

Number of commits found XX: 62

14 vulnerabilities affecting 123 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2020-08-14 01:16:47