notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
FreshPorts needs to find a new hosting provide willing to take a 2U chassis and host it free of charge. This is part of the FreshPorts project. Preferably in the Austin area. This is not a primary server, but it used for development.
non port: graphics/electrix/Makefile
SVNWeb

Number of commits found: 33

Wed, 22 Jan 2020
[ 17:59 tcberner search for other commits by this committer ] Original commit   Revision:523824 (Only the first 10 of 88 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.84.0

Release 0.84.0:
        core:
         * Fix crash when converting from Unicode to ASCII-7
         * Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
         * JBIG2Stream: fix potential crash in malformed documents
         * JBIG2Stream: fix leak in reset() if called several times
         * Internal code improvements

        utils:
         * pdfimages: Add error message if first page is larger then number of
pages.
         * pdfinfo: Improved paper size recognition
         * pdfsig: Fix exit code when dumping signatures
         * pdftocairo: Error out when even/odd selects 0 pages
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 26 Dec 2019
[ 07:54 antoine search for other commits by this committer ] Original commit   Revision:520894 (Only the first 10 of 255 ports in this commit are shown above. View all ports for this commit)
Deprecate a few ports

With hat:	portmgr
Fri, 8 Nov 2019
[ 14:36 tobik search for other commits by this committer ] Original commit   Revision:517071 (Only the first 10 of 74 ports in this commit are shown above. View all ports for this commit)
graphics: Add missing USES={gl,gnome,sdl}
Fri, 1 Nov 2019
[ 21:51 tcberner search for other commits by this committer ] Original commit   Revision:516270 (Only the first 10 of 92 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.82.0

Release 0.82.0:
        core:
         * Fix not being able to open some files. Issue #832
         * Fix crashes in malformed files
         * Fix memory leak on broken files
         * Minor performance improvements
         * Minor code improvements

        glib:
         * Add poppler_document_new_from_bytes
         * PopplerAttachment: Silence deprecation warnings for ctime/mtime

        build system:
         * pdf-inspector: Support builddir != srcdir
         * Install Cairo* headers if Cairo has been found

Thanks to adridg@ for fixing all the fallout.

Exp-run by:	antoine
PR:		241532
Approved by:	gnome (kwm, implicit)
Sun, 29 Sep 2019
[ 07:25 tcberner search for other commits by this committer ] Original commit   Revision:513196 (Only the first 10 of 55 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.81.0

Release 0.81.0:
        core:
         * Splash: Always enable support for CMYK rasterization
         * CairoOutputDev: Check scaled dimensions for 0. Issue #737
         * BaseCryptStream: Fix potential uninitialized memory read
         * SplashBitmap: Fix wrong width condition for splashModeDeviceN8
         * Fix crashes in malformed files

PR:		240781
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)
Sun, 1 Sep 2019
[ 20:46 tcberner search for other commits by this committer ] Original commit   Revision:510739 (Only the first 10 of 60 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.80.0

Release 0.80.0:
core:
 * Annotations: Implement support for setting a different text in the appearance
stream than the real text
 * Splash: Optionally use small_vector from boost
 * Fix memory leaks on broken files
 * Fix abort on broken files
 * Small code simplifications
 * Remove USE_FIXEDPOINT support. Issue #821

qt5:
 * Fix MSVC build
 * Add subsitute-font information
 * Fix since marker of some functions
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 31 Jul 2019
[ 21:14 tcberner search for other commits by this committer ] Original commit   Revision:507740 (Only the first 10 of 55 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.79.0

Release 0.79.0:
        core:
         * Fix regression on TextSelectionPainter
         * Fix parsing of DefaultAppearance
         * Fix memory leak in PostScriptFunction
         * Fix crashes in fuzzed files

        qt5:
         * Implemented support for setIcon by changing appearance
         * Added option to set the form available to print
         * QString::null is deprecated, use QString()
         * Replace deprecated qStableSort with std::stable_sort

        build system:
         * Turn README into README.md and expand it

PR:		239277
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)
Sat, 29 Jun 2019
[ 08:55 tcberner search for other commits by this committer ] Original commit   Revision:505331 (Only the first 10 of 56 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.78.0

Release 0.78.0:
        core:
         * Fix line annotation arrows for usage in dimensioning
         * Handle Ink annots without an InkList but with an AP
         * Fix typos preventing parsing of Movie start and duration
         * Fix crash on malformed files

        glib:
         * Add poppler_document_create_dests_tree()
         * Don't use the deprecated g_type_class_add_private()
         * Document the differences between render() and render_for_printing()
         * Fix introspection for poppler_document_new_from_data
         * Don't create PopplerInputStream with length 0. Issue #414
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 1 Jun 2019
[ 06:39 tcberner search for other commits by this committer ] Original commit   Revision:503222 (Only the first 10 of 66 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.77.0

Release 0.77.0:
        core:
         * Fix crash on signature handling. Issue #766
         * Fix small memory leak in SignatureHandler::getCertificateInfo
         * Splash: Restrict filling of overlapping boxes. Issue #750
         * Fix crash on malformed files

        qt5:
         * Fix optional content handling with exclusive layers

        cpp:
         * Make render_page thread-safe

        utils:
         * pdfsig: Fix small memory leak
         * pdftotext: Fix typo in manpage

PR:		238115
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)
Mon, 13 May 2019
[ 18:33 tcberner search for other commits by this committer ] Original commit   Revision:501583 (Only the first 10 of 75 ports in this commit are shown above. View all ports for this commit)
graphics/poppler: update to 0.76.1

From Changelog at https://poppler.freedesktop.org/releases.html :

Release 0.76.1:
        core:
         * Make the mul tables be calculated at compile time with constexpr.
         * splash: Fix compile with SPLASH_CMYK enabled
         * Some typo fixing in error messages

        qt5:
         * Fix regression in annotation handling

        build system:
         * Fix some typos in build system output and comments
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Mon, 19 Feb 2018
[ 11:10 antoine search for other commits by this committer ] Original commit   Revision:462307 (Only the first 10 of 442 ports in this commit are shown above. View all ports for this commit)
Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA
Thu, 24 Aug 2017
[ 13:45 swills search for other commits by this committer ] Original commit   Revision:448669 (Only the first 10 of 31 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION after recent poppler update
Sun, 19 Mar 2017
[ 14:02 rene search for other commits by this committer ] Original commit   Revision:436494 (Only the first 10 of 74 ports in this commit are shown above. View all ports for this commit)
Take in olivierd@'s commit bit on his request.

Submitted by:	olivierd@
With hat:	portmgr-secretary
Sat, 7 Jan 2017
[ 10:42 olivierd search for other commits by this committer ] Original commit   Revision:430778 (Only the first 10 of 50 ports in this commit are shown above. View all ports for this commit)
Chase update of graphics/poppler (and slaves ports) in revision r430777
Mon, 5 Sep 2016
[ 20:02 olivierd search for other commits by this committer ] Original commit   Revision:421390 (Only the first 10 of 50 ports in this commit are shown above. View all ports for this commit)
Chase update of Poppler after revision r421386
Fri, 1 Apr 2016
[ 14:00 mat search for other commits by this committer ] Original commit   Revision:412346 (Only the first 10 of 5103 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
Thu, 21 Jan 2016
[ 19:40 kwm search for other commits by this committer ] Original commit   Revision:406872 (Only the first 10 of 61 ports in this commit are shown above. View all ports for this commit)
Update poppler to 0.40.0. [1]

Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.

PR:		206293 [1]
Submitted by:	olivierd@ [1]
Obtained from:	ubuntu [2], rubygem-poppler upstream [3]
Sun, 2 Aug 2015
[ 16:06 kwm search for other commits by this committer ] Original commit   Revision:393431 (Only the first 10 of 58 ports in this commit are shown above. View all ports for this commit)
Update poppler to 0.34.0. [1]

Chase all users of shlib version change of libpoppler.so.

PR:		201477 [1]
Submitted by:	olivierd@ [1]
Wed, 8 Apr 2015
[ 15:05 bapt search for other commits by this committer ] Original commit   Revision:383571 (Only the first 10 of 25 ports in this commit are shown above. View all ports for this commit)
Add a new USES=waf to handle the waf building system, allowing to factorise code
Plug waf into MAKE_CMD and CONFIGURE_CMD so the regular defined targets can be
reused

Always define _MAKE_JOBS so that when bsd.port.mk will stop overwritting
_MAKE_JOBS when parallel jobs are disabled we can enforce -j1 (which is needed
to really disable parallelisation with waf

WAF_CMD has been created to allow one to override the location of the waf script
relatively to WRKSRC

CONFIGURE_TARGET is by default defined to "configure"
ALL_TARGET is by default defined to "build"
INSTALL_TARGET is by default defined to "install"

USES=waf is by default stagedir safe
Tue, 3 Feb 2015
[ 12:28 kwm search for other commits by this committer ] Original commit   Revision:378348 (Only the first 10 of 55 ports in this commit are shown above. View all ports for this commit)
Update poppler to 0.30.0 [1].

Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].

PR:		196599 [1]
Submitted by:	olivierd@ [1]
Exp-run by:	antoine@
Obtained from:	upstream [2]
Tue, 25 Nov 2014
[ 12:55 makc search for other commits by this committer ] Original commit   Revision:373404 (Only the first 10 of 51 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION after graphics/poppler update to 0.26.3
Mon, 27 Oct 2014
[ 23:36 jhale search for other commits by this committer ] Original commit   Revision:371610
- Fix stage-qa error where STAGEDIR was being referenced by the binary
  by setting up MAKE_ENV instead of passing STAGEDIR through PREFIX
- Respect CC, CFLAGS, LDFLAGS, and MAKE_JOBS
- Strip binaries
- Convert USE_BZIP2 to USES
- Use options helpers (this also fixes a problem where LIB_DEPENDS was
  being over-ridden in the PDF option, effectively cancelling out the
  LIB_DEPENDS for the PS option)
  Note: Did not use <OPT>_CONFIGURE_ENABLE because the configure script
  only understands --disable-<feature>
- Bump PORTREVISION

PR:		194317
Approved by:	olivierd (maintainer)
Tue, 21 Oct 2014
[ 16:36 mva search for other commits by this committer ] Original commit   Revision:371326 (Only the first 10 of 61 ports in this commit are shown above. View all ports for this commit)
- Convert ports of graphics/ to new USES=python

Approved by:	portmgr (implicit)
Mon, 5 May 2014
[ 09:45 bapt search for other commits by this committer ] Original commit   Revision:352986 (Only the first 10 of 293 ports in this commit are shown above. View all ports for this commit)
Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr
Mon, 27 Jan 2014
[ 17:14 olivierd search for other commits by this committer ] Original commit   Revision:341434
- Support STAGEDIR
- Fix Python version
- Remove indefinite article in COMMENT entry
- Use new LIB_DEPENDS syntax
- Replace USE_GNOME= desktopfileutils to USES= desktop-file-utils
- Replace tab by space in WWW entry (pkg-descr)
Fri, 27 Dec 2013
[ 16:54 kwm search for other commits by this committer ] Original commit   Revision:337749 (Only the first 10 of 56 ports in this commit are shown above. View all ports for this commit)
Update poppler to 0.24.4.

Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.

Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.
Fri, 20 Sep 2013
[ 18:35 bapt search for other commits by this committer ] Original commit   Revision:327733 (Only the first 10 of 1084 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
Fri, 26 Apr 2013
[ 10:44 ak search for other commits by this committer ] Original commit   Revision:316596 (Only the first 10 of 277 ports in this commit are shown above. View all ports for this commit)
- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)
Tue, 23 Apr 2013
[ 10:47 bapt search for other commits by this committer ] Original commit   Revision:316343 (Only the first 10 of 84 ports in this commit are shown above. View all ports for this commit)
Convert g* to USES=pkgconfig
Thu, 20 Dec 2012
[ 23:13 marius (src committer) search for other commits by this committer ] Original commit   Revision:309330
Make D-Bus and NLS support options (defaults unchanged). For completeness
sake, also make PDF support optional (still allowing to build a PS-only
reader).

Approved by:	olivierd, bapt
Mon, 15 Oct 2012
[ 17:06 olivierd search for other commits by this committer ] Original commit   Revision:305925
- Convert to OptionsNG

While here
- Update maintainer address
- Trim Makefile headers

Approved by:	rene, miwi (mentors)
Feature safe:	yes
Fri, 1 Jun 2012
[ 05:26 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4371 ports in this commit are shown above. View all ports for this commit)
- update png to 1.5.10
Sat, 19 Nov 2011
[ 18:14 miwi search for other commits by this committer ] Original commit 
eLectrix is an application to view Portable Document Format (PDF) files.
Features:
- zoom an rotation
- basic text search
- basic navigation history
- fullscreen mode
- tabs

WWW:    http://electrix.sourceforge.net/

PR:             ports/162525
Submitted by:   Olivier Duchateau <duchateau.olivier@gmail.com>
Feature safe: yes

Number of commits found: 33