Number of commits found XX: 77

graphics/poppler: update to 0.90

Release 0.90.0:
        core:
         * Color profile tweaks
         * Small signature improvements
         * BBoxOutputDev: Fix calculation when type3 fonts are involved
         * Fix potential crash when reading Forms
         * Fix infinite loop in broken file
        glib:
         * Fix adding annots in rotated pages
         * Add ability to reset forms
         * Several fixes to the documentation
        qt5:
         * Make it clear we require Qt 5.5

(Only the first 15 lines of the commit message are shown above )

graphics/poppler: update to 0.89.0

Release 0.89.0:
        core:
         * Add support for ResetForm action. Issue #225
         * Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
         * Fix exporting to PS of some files with CID fonts
         * Use ICC profiles in PS output (if new enough lcms is used)
         * Allow almost-singular tiling pattern matrices. Issue #894
         * Fix memory leak when failing to load some fonts
         * CairoOutputDev: Use stroke opacity when clipping to a stroke path
         * CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190

        glib:
         * Add poppler_movie_get_aspect

        cpp:
         * Add the font infos to the text_box object

Exp-run by:	antoine
PR:		246848

graphics/poppler: update to 0.88.0

Release 0.88.0:

        core:
         * Support Widget Annotation Buttons not linked to any Form
         * SplashOuputDev: Use stroking opacity when clipping to a stroke path
         * Handle 1 bit RGB images in ICC colorspace
         * Internal code improvements

        qt5:
         * Add Document::signatures. Returns signatures not attached to any page
         * ArthurOutputDev: Fix font hinting
         * ArthurOutputDev: Set the opacity when filling with axial gradients
         * ArthurOutputDev: Implement the clipToStrokePath method

(Only the first 15 lines of the commit message are shown above )

graphics/poppler: update to 0.87.0

Release 0.87.0:
        core:
         * Fix crashes due to inconsistent vtables for Clang builds
         * Fix leak in broken files
         * Internal code improvements

        qt5:
         * Add option to get form choice for export value
         * ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695

        glib:
         * Internal code improvements

         utils:
         * pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest

PR:		245150
Exp-run by:	antoine

Update poppler to 0.86.1

Release 0.86.1:
        core:
         * Fix regression in Browse Link handling
         * Internal code improvements

Release 0.86.0:
        core:
         * Fix link content exfiltration attack
         * Splash: Implement gouraudTriangleShadedFill for some non parametrized
shadings. Issue #881
         * Fix case unsensitive search for Old Hungarian, Warang Citi,
Medefaidrin and Adlam
         * Internal code improvements

        glib:

(Only the first 15 lines of the commit message are shown above )

graphics/epdfview: Enable CUPS and NLS options per default because all
dependencies for them are already pulled in by gtk20. This allows to
actually print PDFs which is quite useful even in 2020.

Bump revision of poppler dependencies

- poppler was updated in r525051, bump revisions

graphics/poppler: update to 0.84.0

Release 0.84.0:
        core:
         * Fix crash when converting from Unicode to ASCII-7
         * Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
         * JBIG2Stream: fix potential crash in malformed documents
         * JBIG2Stream: fix leak in reset() if called several times
         * Internal code improvements

        utils:
         * pdfimages: Add error message if first page is larger then number of
pages.
         * pdfinfo: Improved paper size recognition
         * pdfsig: Fix exit code when dumping signatures
         * pdftocairo: Error out when even/odd selects 0 pages

(Only the first 15 lines of the commit message are shown above )

graphics: Add missing USES={gl,gnome,sdl}

graphics/poppler: update to 0.82.0

Release 0.82.0:
        core:
         * Fix not being able to open some files. Issue #832
         * Fix crashes in malformed files
         * Fix memory leak on broken files
         * Minor performance improvements
         * Minor code improvements

        glib:
         * Add poppler_document_new_from_bytes
         * PopplerAttachment: Silence deprecation warnings for ctime/mtime

        build system:
         * pdf-inspector: Support builddir != srcdir
         * Install Cairo* headers if Cairo has been found

Thanks to adridg@ for fixing all the fallout.

Exp-run by:	antoine
PR:		241532
Approved by:	gnome (kwm, implicit)

graphics/poppler: update to 0.81.0

Release 0.81.0:
        core:
         * Splash: Always enable support for CMYK rasterization
         * CairoOutputDev: Check scaled dimensions for 0. Issue #737
         * BaseCryptStream: Fix potential uninitialized memory read
         * SplashBitmap: Fix wrong width condition for splashModeDeviceN8
         * Fix crashes in malformed files

PR:		240781
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)

graphics/poppler: update to 0.80.0

Release 0.80.0:
core:
 * Annotations: Implement support for setting a different text in the appearance
stream than the real text
 * Splash: Optionally use small_vector from boost
 * Fix memory leaks on broken files
 * Fix abort on broken files
 * Small code simplifications
 * Remove USE_FIXEDPOINT support. Issue #821

qt5:
 * Fix MSVC build
 * Add subsitute-font information
 * Fix since marker of some functions

(Only the first 15 lines of the commit message are shown above )

graphics/poppler: update to 0.79.0

Release 0.79.0:
        core:
         * Fix regression on TextSelectionPainter
         * Fix parsing of DefaultAppearance
         * Fix memory leak in PostScriptFunction
         * Fix crashes in fuzzed files

        qt5:
         * Implemented support for setIcon by changing appearance
         * Added option to set the form available to print
         * QString::null is deprecated, use QString()
         * Replace deprecated qStableSort with std::stable_sort

        build system:
         * Turn README into README.md and expand it

PR:		239277
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

graphics/poppler: update to 0.78.0

Release 0.78.0:
        core:
         * Fix line annotation arrows for usage in dimensioning
         * Handle Ink annots without an InkList but with an AP
         * Fix typos preventing parsing of Movie start and duration
         * Fix crash on malformed files

        glib:
         * Add poppler_document_create_dests_tree()
         * Don't use the deprecated g_type_class_add_private()
         * Document the differences between render() and render_for_printing()
         * Fix introspection for poppler_document_new_from_data
         * Don't create PopplerInputStream with length 0. Issue #414

(Only the first 15 lines of the commit message are shown above )

graphics/poppler: update to 0.77.0

Release 0.77.0:
        core:
         * Fix crash on signature handling. Issue #766
         * Fix small memory leak in SignatureHandler::getCertificateInfo
         * Splash: Restrict filling of overlapping boxes. Issue #750
         * Fix crash on malformed files

        qt5:
         * Fix optional content handling with exclusive layers

        cpp:
         * Make render_page thread-safe

        utils:
         * pdfsig: Fix small memory leak
         * pdftotext: Fix typo in manpage

PR:		238115
Exp-run by:	antoine
Approved by:	gnome (kwm, implicit)

graphics/poppler: update to 0.76.1

From Changelog at https://poppler.freedesktop.org/releases.html :

Release 0.76.1:
        core:
         * Make the mul tables be calculated at compile time with constexpr.
         * splash: Fix compile with SPLASH_CMYK enabled
         * Some typo fixing in error messages

        qt5:
         * Fix regression in annotation handling

        build system:
         * Fix some typos in build system output and comments

(Only the first 15 lines of the commit message are shown above )

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Adjust USES to fix builds on gcc-based architectures.

While here, pet portlint.

Tested for no regression on amd64.

Approved by:	portmgr (tier-2 blanket)

Bump PORTREVISION after recent poppler update

Chase update of graphics/poppler (and slaves ports) in revision r430777

Chase update of Poppler after revision r421386

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters

(Only the first 15 lines of the commit message are shown above )

Update poppler to 0.40.0. [1]

Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.

PR:		206293 [1]
Submitted by:	olivierd@ [1]
Obtained from:	ubuntu [2], rubygem-poppler upstream [3]

Update poppler to 0.34.0. [1]

Chase all users of shlib version change of libpoppler.so.

PR:		201477 [1]
Submitted by:	olivierd@ [1]

graphics/epdfview: refresh with working mirrors

trac.emma-soft.com -> No address record
mirror.slitaz.org -> Not Found (only .tar.gz available)

Mark a few ports in graphics category BROKEN (unfetchable)

Update poppler to 0.30.0 [1].

Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].

PR:		196599 [1]
Submitted by:	olivierd@ [1]
Exp-run by:	antoine@
Obtained from:	upstream [2]

Bump PORTREVISION after graphics/poppler update to 0.26.3

Reset the 99 ports still listed under sylvio@

Sylvio's last commit was 17 months ago, a full 5 months after all of his
ports could have been reset per policy.  Given the push to complete
staging (48 ports are still unstaged, something like 70+ have already
been staged by other committers) and given that PRs are automatically
assigned but never addressed, it's better just to reset all the ports and
PRs so that it's clear to others that these ports are free to maintain.

Approved by:	portmgr (implicit)

Support stage [1]
While here:
- USES=desktop-file-utils
- Use options helpers

PR:		189680
Submitted by:	Matthieu Volat

Update poppler to 0.24.4.

Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.

Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.

- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with [fgijk])

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Add an explicit dependency on pkgconf

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

Convert from USE_GETTEXT to USES= gettext

While here:
- Trim some headers
- Convert to new options framework

* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
  are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
  in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
  eliminate pkg-config run dependency completely, a second phase is needed
  and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
  Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
  versions for some ports.
* Fix other ports so they build with the new glib version.

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo

- update png to 1.5.10

- Fix colour display after poppler-glib update

PR:             ports/162266
Submitted by:   Anati Chang <femc7488 gmail.com>
Obtained from:  http://trac.emma-soft.com/epdfview/changeset/367
Feature safe:   yes

Update poppler to 0.18.0.

The qt3 bindings are removed upstream.
The glib library lost the last gdk-pixbuf code. And rename it from
-gtk to -glib.

Thanks to:      pav for a exp-runs
                bapt for double checking the libreoffice ports

- only cups-client is required, not cups-base

PR:             ports/160664
Submitted by:   "4720@hushmail.com" <4720@hushmail.com>
Approved by:    maintainer timeout (6 weeks)
Approved by:    bapt,sahil (mentors, implicit)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Chase poppler shlib bumps.

- Update to 0.1.8

- Add license

- Add icon in .desktop
- Removed MD5 in distinfo

PR:             ports/155323
Submitted by:   David Demelier <demelier.david@gmail.com>

Chase poppler update.

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update my mail address to FreeBSD

Approved by:    miwi (mentor)

- Update MASTER_SITES
- Pass maintainership to submitter

PR:             138291
Submitted by:   Sylvio Cesar <scjamorim@bsd.com.br>

Reset chinsan@FreeBSD.org due to numerous maintainer-timeouts and no
response to email.

Hat:            portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

- Fixed mouse scroll

Reported by:    Stefan Thurner <thurners@nicsys.de>
Source from:    http://bugs.gentoo.org/show_bug.cgi?id=261123

- Update to 0.1.7
- Remove unused patch

- Add Knob for CUPS support

PR:             ports/128366
Submitted by:   Carlos Santos <unixmania at gmail _dot_ com>

- Fix segfault when opening the print dialog.
- Bump PORTREVISION

PR:             ports/126917
Submitted by:   Henrik Friedrichsen <hrkfrd at googlemail.com>
Approved by:    maintainer

First all, ahze did most of work. Thanks ahze! Last week or so, I am just
merely pick up and help him. Thanks to many testers in both private and
mailing list emails for report a few of build and dependencies problems.
Also, thanks to marcus and Chess Griffin for test in their tinderboxes.

x11/pixman: Update to 0.10.0
-------------------------------------------------------
Firefox 3 needs it. Orignal, the shared library was bumped and ahze has
added a new feature in our USE_GNOME=ltverhack by can control the number
of shared library. To control the number of shared library, add the
ltverhack:N. Right now pixman has USE_GNOME=ltverhack:9 to make it stays
same at libpixman-1.so.9. If anyone want to use ltverhack:N in one of your
port, you need to make sure the ABI doesn't change to use it..
-------------------------------------------------------

(Only the first 15 lines of the commit message are shown above )

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update cppunit to 1.12.0
- Update all related ports

PR:             120489
Submitted by:   leeym
Approved by:    maintainer timeout

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

Chase the poppler shared lib version.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- devel/cppunit is used in build only (for testing suite). Change to
  BUILD_DEPENDS, bump PORTREVISION

PR:             ports/110091
Submitted by:   Artis Caune <Artis.Caune at latnet.lv>
Approved by:    chinsan (maintainer)

- Update to 0.1.6

PR:             ports/109643
Submitted by:   chinsan (maintainer)

- Remove chinsan2.twbbs.org, distfiles moved to LOCAL

PR:             108392, 108393, 108394, 108395, 108396, 108397, 108398, 108399,
108400, 108401
Submitted by:   chinsan (maintainer)

- Change the new location of tar ball
Reported by: Bill "distfiles" Fenner

PR:             ports/104096
Submitted by:   maintainer (chinsan)

Change the following ports to my FreeBSD.org email.
Approved by:    delphij (mentor)

archivers/pecl-bz2/Makefile
archivers/pecl-lzf/Makefile
archivers/pecl-rar/Makefile
audio/fapg/Makefile
audio/pecl-id3/Makefile
chinese/CJKUnifonts/Makefile
chinese/auto-tw-l10n/Makefile
chinese/dfsongsd/Makefile
chinese/fortunetw/Makefile
chinese/gcin/Makefile
chinese/joe/Makefile
chinese/joe2/Makefile

(Only the first 15 lines of the commit message are shown above )

- Fix "Save PDF File" dialogue
  "Save PDF File" dialogue has "Open" instead of "Save" button text

PR:             ports/101626
Submitted by:   maintainer (chinsan <chinsan dot tw_AT_gmail dot com>)

- Fix SIGBUS when trying to search
  epdfview crashes on -CURRENT, when trying to search in document.
  Yuri have added a bug report with patch:
  http://www.emma-soft.com/projects/epdfview/ticket/57

PR:             ports/101621
Submitted by:   maintainer <chinsan dot tw@gmail dot com>

ePDFView is a free lightweight PDF document viewer using Poppler and GTK+
libraries.

The aim of ePDFView is to make a simple PDF document viewer, in the lines of
Evince but without using the Gnome libraries.

WWW: http://www.emma-soft.com/projects/epdfview/

PR:             ports/99843
Submitted by:   chinsan <chinsan.tw at gmail.com>

Number of commits found XX: 77

25 vulnerabilities affecting 118 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2020-07-08 20:51:12