notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
FreshPorts needs to find a new hosting provide willing to take a 2U chassis and host it free of charge. This is part of the FreshPorts project. Preferably in the Austin area. This is not a primary server, but it used for development.
non port: graphics/exrtools/Makefile
SVNWeb

Number of commits found: 60

Tue, 3 Aug 2021
[ 18:19 Matthias Andree (mandree) search for other commits by this committer ]    commit hash:56ffa089e2baf297adb8da027f01c373183bdb68  56ffa08  (Only the first 10 of 44 ports in this commit are shown above. View all ports for this commit)
*: graphics/openexr PORTREVISION bumps

OpenEXR changes its SONAME again, so bump PORTREVISION of its users.
Sat, 17 Jul 2021
[ 09:17 Matthias Andree (mandree) search for other commits by this committer ]    commit hash:3cda93bdf69bfb4ea99181e638e661c467dad38d  3cda93b  (Only the first 10 of 31 ports in this commit are shown above. View all ports for this commit)
*: bump PORTREVISION after math/Imath update
Sat, 3 Jul 2021
[ 05:15 Matthias Andree (mandree) search for other commits by this committer ]    commit hash:4030a14b56cadbbad0d09068011f6624050811f5  4030a14  (Only the first 10 of 40 ports in this commit are shown above. View all ports for this commit)
*: Bump PORTREVISION for openexr update

OpenEXR's patchlevel updated bumped the major version
of the OpenEXR library, hence bump PORTREVISION of all
ports that require OpenEXR.
Tue, 18 May 2021
[ 17:15 Matthias Andree (mandree) search for other commits by this committer ]    commit hash:1d5b7c913b1c41f208ac96ccf898296200f22fcc  1d5b7c9  (Only the first 10 of 39 ports in this commit are shown above. View all ports for this commit)
Bump portrevisions of openexr and Imath users.
Mon, 12 Apr 2021
[ 00:33 Matthias Andree (mandree) search for other commits by this committer ]    commit hash:73ab07c25a09345a265680ab55de2e5cebebcd6a  73ab07c  (Only the first 10 of 16 ports in this commit are shown above. View all ports for this commit)
chase library renames for OpenEXR/Imath 3.0
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Sat, 13 Feb 2021
[ 11:08 mandree search for other commits by this committer ] Original commit   Revision:565123 (Only the first 10 of 45 ports in this commit are shown above. View all ports for this commit)
graphics/openexr, ilmbase: security update to v2.5.5

https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.5

"Specific OSS-fuzz issues include:

    OSS-fuzz #30291 Timeout in openexr_exrcheck_fuzzer
    OSS-fuzz #29106 Heap-buffer-overflow in Imf_2_5::FastHufDecoder::decode
    OSS-fuzz #28971 Undefined-shift in Imf_2_5::cachePadding
    OSS-fuzz #29829 Integer-overflow in
Imf_2_5::DwaCompressor::initializeBuffers
    OSS-fuzz #30121 Out-of-memory in openexr_exrcheck_fuzzer"

Bump PORTREVISION of ports that directly depend on openexr and/or ilmbase.

MFH:		2021Q1
Security:	98044aba-6d72-11eb-aed7-1b1b8a70cc8b
Sun, 3 Jan 2021
[ 16:57 mandree search for other commits by this committer ] Original commit   Revision:560022 (Only the first 10 of 38 ports in this commit are shown above. View all ports for this commit)
graphics/openexr: really commit v2.5.4 update.

Unfortunately, this was missed with the ilmbase update, and
causes yet another PORTREVISION bump on all dependent ports.

repeating ilmbase's commit log here:

"Patch release with various bug/sanitizer/security fixes, primarily related to
reading corrupted input files."
<https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.4>

Cherry-pick upstream commit for GCC 11 compatibility:
<https://github.com/AcademySoftwareFoundation/openexr/commit/a40a6151c4e746eb8f93c7c06992d0ec11289fdc>

Since this changes the patchlevel of the solibs, bump PORTREVISION of dependent
ports just to be sure.
(graphics/py-openshadinglanguage is unaltered and .includes the revision bump
from .../openshadinglanguage.)

MFH:		2021Q1 (this requires discussion by ports-secteam@!)

Reported by:	VVD (IRC, #bsdports)
[ 10:30 mandree search for other commits by this committer ] Original commit   Revision:560002 (Only the first 10 of 40 ports in this commit are shown above. View all ports for this commit)
graphics/openexr: graphics/ilmbase: v2.5.4 update

"Patch release with various bug/sanitizer/security fixes, primarily related to
reading corrupted input files."
<https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.4>

Cherry-pick upstream commit for GCC 11 compatibility:
<https://github.com/AcademySoftwareFoundation/openexr/commit/a40a6151c4e746eb8f93c7c06992d0ec11289fdc>

Since this changes the patchlevel of the solibs, bump PORTREVISION of dependent
ports just to be sure.
(graphics/py-openshadinglanguage is unaltered and .includes the revision bump
from .../openshadinglanguage.)

MFH:		2021Q1 (this requires discussion by ports-secteam@!)
Thu, 13 Aug 2020
[ 22:35 mandree search for other commits by this committer ] Original commit   Revision:544853 (Only the first 10 of 35 ports in this commit are shown above. View all ports for this commit)
graphics/ilmbase, graphics/openexr: PORTREVISION bump for users

ilmbase and openexr were updated to v2.5.3 and their shlibs changed
from *.25.0.1 to *.25.0.2.

This is a PORTREVISION bump to ports using ilmbase or openexr
to chase that change and trigger rebuild.
Thu, 16 Jul 2020
[ 12:13 mandree search for other commits by this committer ] Original commit   Revision:542353 (Only the first 10 of 36 ports in this commit are shown above. View all ports for this commit)
openexr/ilmbase update w/ shlib rename => PORTREVISION bumps of dependent ports

OpenEXR and ILMBASE updates to 2.5.2 rename the full shlib version
names from .0.0 to .0.1 => to be on the safe side, bump PORTREVISIONs.

Approved by:	portmgr (blanket)
MFH:		2020Q3 (PORTREVISION bump after OpenEXR/ilmbase update)
Security:	714e6c35-c75b-11ea-aa29-d74973d1f9f3
Tue, 12 May 2020
[ 15:47 mandree search for other commits by this committer ] Original commit   Revision:534996 (Only the first 10 of 39 ports in this commit are shown above. View all ports for this commit)
graphics/ilmbase: graphics/openexr: update to upstream release 2.5.1

Upstream release notes:
* A patch release that corrects the SO version for the v2.5 release,
  which missed getting bumped in v2.5.0.

* This release also fixes an improper failure in IlmImfTest
  when running on ARMv7 and AAarch64.

Bump PORTREVISION of all port directly requiring ilmbase or openexr
that are not marked BROKEN (shlib/.so file version bump).

Test build of all port directly depending on ilmbase or openexr
succeeded in poudriere in a 12.1-RELEASE amd64 jail.
Fri, 8 May 2020
[ 11:57 mandree search for other commits by this committer ] Original commit   Revision:534388 (Only the first 10 of 43 ports in this commit are shown above. View all ports for this commit)
graphics/ilmbase: graphics/openexr: update to v2.5.0

ChangeLog:
- https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.5.0

* Bump PORTREVISION of all consumers except py-openimageio (BROKEN).

* cad/PrusaSlicer:
    LIB_DEPENDS: remove version from libHalf.so
    BUILD_DEPENDS+=qt5-buildtools as package (needed on bare metal builds)
    USE_GL+=gl
    USES+=pkgconfig (needed to find libHalf)
Sun, 5 Jan 2020
[ 02:17 mandree search for other commits by this committer ] Original commit   Revision:522079 (Only the first 10 of 64 ports in this commit are shown above. View all ports for this commit)
graphics/ilmbase, graphics/openexr: upgrade to upstream v2.4.0

graphics/gstreamer1-plugins-openexr: switch from C++98 to C++11 to
match new OpenEXR headers and unbreak compilation.

Bump PORTREVISION of all ports depending directly on either, based
on assessing INDEX-12 (bump_portrevision.pl -l (shallow) used).

Release Notes:
https://github.com/AcademySoftwareFoundation/openexr/releases/tag/v2.4.0

The update was deliberately deferred until after 2020Q1, and should
not be MFH'd back to it.
Wed, 16 Oct 2019
[ 15:24 pkubaj search for other commits by this committer ] Original commit   Revision:514598
graphics/exrtools: unbreak on arm

Builds fine.

Approved by:	mentors (implicit approval)
Fri, 26 Jul 2019
[ 20:46 gerald search for other commits by this committer ] Original commit   Revision:507372 (Only the first 10 of 3853 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330
Thu, 20 Dec 2018
[ 08:21 ehaupt search for other commits by this committer ] Original commit   Revision:487855
- Fix build with GCC-based architectures
- Add USES=localbase:ldflags
- Re-generate patch files
- Pacify portlint

PR:		234187
Submitted by:	pkubaj@anongoth.pl
Sat, 22 Sep 2018
[ 10:15 mandree search for other commits by this committer ] Original commit   Revision:480374 (Only the first 10 of 70 ports in this commit are shown above. View all ports for this commit)
Update ilmbase and openexr to 2.3.0, rename OpenEXR to openexr.

Release notes: <https://github.com/openexr/openexr/releases/tag/v2.3.0>

Adjust LIB_DEPENDS of all ports that require ilmbase or openexr to chase
the new lower-case spelling of the name, and to omit the version from the
library name to ease future maintenance.

Bump PORTREVISION of all ports that depend on ilmbase or openexr directly,
so that they all get rebuilt on upgrades.

Add patches to graphics/ampasCTL to keep it alive, with (a) ilmbase now
that its Iex::BaseExc class is no longer derived from std::string,
details were given upstream through https://github.com/ampas/CTL/issues/71
and (b) to unwind semicolon/;-lists in cmake that stem from openexr/
ilmbase pkg-config variables.
(Note ampasCTL is unmaintained as FreeBSD port, and upstream,
and I cannot run-time test it.)

Poudriere build tests on 11.2-RELEASE-p1 amd64 of ALL ports depending
directly or indirectly on ilmbase and/or openexr have passed without
regressions.  Thus invoking due diligence, I believe I have done the
equivalent of an -exp run, and do not require approval for the dependency
chases to third-party ports.
Fri, 1 Dec 2017
[ 01:58 mandree search for other commits by this committer ] Original commit   Revision:455244 (Only the first 10 of 49 ports in this commit are shown above. View all ports for this commit)
Security update OpenEXR and ilmbase to 2.2.1.

While here, fix libIlmImfUtil_la_LDFLAGp so that when linking libIlmImfUtil,
the locally built libIlmImf gets precedence over the one in /usr/local,
to permit upgrades in a running system with the older version installed.

This changes the library's SONAME, so bump PORTREVISION of all dependees.

Unfortunately, this looks a bit too intrusive for an MFH to 2017Q4.

Security:	CVE-2017-9110
Security:	CVE-2017-9111
Security:	CVE-2017-9112
Security:	CVE-2017-9113
Security:	CVE-2017-9114
Security:	CVE-2017-9115
Security:	CVE-2017-9116
Security:	803879e9-4195-11e7-9b08-080027ef73ec
Thu, 30 Nov 2017
[ 06:13 linimon search for other commits by this committer ] Original commit   Revision:455167 (Only the first 10 of 189 ports in this commit are shown above. View all ports for this commit)
For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.

This is part two of a multipart commit to bring armv7 ports to parity
with armv6.

Approved by:	portmgr (tier-2 blanket)
Obtained from:	lonesome.com -exp run
Sat, 27 May 2017
[ 20:33 linimon search for other commits by this committer ] Original commit   Revision:441874 (Only the first 10 of 22 ports in this commit are shown above. View all ports for this commit)
Mark some ports failing on armv6, for errors classified as "configure_error".

Note: this skips all the ports that _sometimes_ fail with CMake errors.  We
need to investigate that problem, and find out if it is specific to the qemu
environment.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)
Mon, 8 Aug 2016
[ 14:24 ehaupt search for other commits by this committer ] Original commit   Revision:419849
Register graphics/ilmbase as LIB_DEPENDS
Fri, 1 Apr 2016
[ 14:00 mat search for other commits by this committer ] Original commit   Revision:412346 (Only the first 10 of 5103 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
Mon, 22 Jun 2015
[ 18:33 antoine search for other commits by this committer ] Original commit   Revision:390310 (Only the first 10 of 374 ports in this commit are shown above. View all ports for this commit)
Convert to USES=jpeg
Tue, 6 Jan 2015
[ 09:38 ehaupt search for other commits by this committer ] Original commit   Revision:376397
Move MASTER_SITES from CRITICAL to LOCAL/ehaupt
Thu, 25 Dec 2014
[ 20:54 bapt search for other commits by this committer ] Original commit   Revision:375598 (Only the first 10 of 446 ports in this commit are shown above. View all ports for this commit)
Bump portrevision after png update
[ 19:04 antoine search for other commits by this committer ] Original commit   Revision:375594 (Only the first 10 of 332 ports in this commit are shown above. View all ports for this commit)
Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade
Wed, 10 Sep 2014
[ 20:50 gerald search for other commits by this committer ] Original commit   Revision:367888 (Only the first 10 of 3171 ports in this commit are shown above. View all ports for this commit)
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)
Fri, 15 Aug 2014
[ 20:37 mandree search for other commits by this committer ] Original commit   Revision:365038 (Only the first 10 of 522 ports in this commit are shown above. View all ports for this commit)
Upgrade OpenEXR and ilmbase to 2.2.0.

GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)

Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130

Couple OpenEXR more tightly to ilmbase and require its exact .so
version.

Add UPDATING note, and bump PORTREVISION of all dependent ports.

Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.

Approved by:	portmgr (implicit for bumping PORTREVISION on unstaged ports)
Wed, 18 Dec 2013
[ 14:35 ehaupt search for other commits by this committer ] Original commit   Revision:336836 (Only the first 10 of 15 ports in this commit are shown above. View all ports for this commit)
Use new LIB_DEPENDS regime
Wed, 20 Nov 2013
[ 14:25 nemysis search for other commits by this committer ] Original commit   Revision:334422 (Only the first 10 of 38 ports in this commit are shown above. View all ports for this commit)
- Bump dependent ports' revisions (graphics/ilmbase and graphics/OpenEXR)

Approved by:	wg (mentor)
Thu, 31 Oct 2013
[ 00:32 nemysis search for other commits by this committer ] Original commit   Revision:332189 (Only the first 10 of 58 ports in this commit are shown above. View all ports for this commit)
graphics/ilmbase

- Update to 2.0.1
- Change master sites to SAVANNAH
- Change maintainer email to @FreeBSD.org
- Remove conflict with non existent Port
- USES pathfix pkgconfig
- Add executable
- Add DOCS Option
- Support STAGEDIR and add OPTIONS_SUB
- Use pathfix instead of simple patches
- Adjust patches
- Change WWW

graphics/OpenEXR
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 25 Oct 2013
[ 12:42 ehaupt search for other commits by this committer ] Original commit   Revision:331571 (Only the first 10 of 19 ports in this commit are shown above. View all ports for this commit)
Fix package list.
Wed, 23 Oct 2013
[ 10:26 ehaupt search for other commits by this committer ] Original commit   Revision:331362 (Only the first 10 of 48 ports in this commit are shown above. View all ports for this commit)
Support staging.
Fri, 20 Sep 2013
[ 18:35 bapt search for other commits by this committer ] Original commit   Revision:327733 (Only the first 10 of 1084 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
Wed, 24 Jul 2013
[ 08:19 ehaupt search for other commits by this committer ] Original commit   Revision:323578 (Only the first 10 of 161 ports in this commit are shown above. View all ports for this commit)
Remove MAKE_JOBS_SAFE which is now default.
Mon, 8 Jul 2013
[ 18:42 ehaupt search for other commits by this committer ] Original commit   Revision:322530 (Only the first 10 of 73 ports in this commit are shown above. View all ports for this commit)
- Convert USE_GMAKE to USES=gmake
- Change pkgconfig:build to pkgconfig since it's the same and it's bad practice.
  It accidentally slipped in during the original introduction
- Trim header
Tue, 23 Apr 2013
[ 07:59 ehaupt search for other commits by this committer ] Original commit   Revision:316318
Convert to USES=pkgconfig
Thu, 17 Jan 2013
[ 03:32 swills search for other commits by this committer ] Original commit   Revision:310537
- Fix build with new OpenEXR

Approved by:	ehaupt
Fri, 1 Jun 2012
[ 05:26 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4371 ports in this commit are shown above. View all ports for this commit)
- update png to 1.5.10
Tue, 27 Dec 2011
[ 15:14 ehaupt search for other commits by this committer ] Original commit  (Only the first 10 of 72 ports in this commit are shown above. View all ports for this commit)
Pacify portlint

Feature safe:   yes
Fri, 23 Sep 2011
[ 22:26 amdmi3 search for other commits by this committer ] Original commit  (Only the first 10 of 2369 ports in this commit are shown above. View all ports for this commit)
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav
Tue, 25 Jan 2011
[ 19:59 ehaupt search for other commits by this committer ] Original commit  (Only the first 10 of 87 ports in this commit are shown above. View all ports for this commit)
Add LICENSE and remove MD5 sums.

Feature safe:   yes
Sun, 28 Mar 2010
[ 06:47 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4470 ports in this commit are shown above. View all ports for this commit)
- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi
Fri, 5 Feb 2010
[ 11:46 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4271 ports in this commit are shown above. View all ports for this commit)
- update to jpeg-8
Fri, 31 Jul 2009
[ 13:57 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 3009 ports in this commit are shown above. View all ports for this commit)
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin
Fri, 27 Mar 2009
[ 09:53 ehaupt search for other commits by this committer ] Original commit  (Only the first 10 of 132 ports in this commit are shown above. View all ports for this commit)
Mark MAKE_JOBS_SAFE
Thu, 27 Mar 2008
[ 19:27 ehaupt search for other commits by this committer ] Original commit  (Only the first 10 of 72 ports in this commit are shown above. View all ports for this commit)
Use MASTER_SITE_CRITICAL
Thu, 20 Mar 2008
[ 09:46 pav search for other commits by this committer ] Original commit  (Only the first 10 of 70 ports in this commit are shown above. View all ports for this commit)
- Remove USE_GETOPT_LONG which is a no-op since March 2007
Sun, 7 Oct 2007
[ 17:46 nork search for other commits by this committer ] Original commit  (Only the first 10 of 13 ports in this commit are shown above. View all ports for this commit)
Chase OpenEXR library version bumped.
Thu, 4 Oct 2007
[ 01:10 edwin search for other commits by this committer ] Original commit  (Only the first 10 of 27 ports in this commit are shown above. View all ports for this commit)
Remove always-false/true conditions based on OSVERSION 500000
Sun, 11 Mar 2007
[ 08:50 nork search for other commits by this committer ] Original commit 
o Update to 1.4.0
o Chase libraries version bump to depending on this port.

[NOTE]
I disabled FLTK support, so you can't use OpenEXR's applications.
Because I'm validating FLTK support.

Spotted by:     Nikolaj Thygesen <nikolaj.thygesen <@> diamondbox.dk>
Obtained from:  Florian Kainz <kainz <@> ilm.com>
Committed at:   AsiaBSDCon 2007 in Tokyo, Japan
Memorial Committing with:
                bushman, kuriyama, hrs, gnn, nobutaka, nyan, motoyuki, metal,
                simokawa, akiyama, ume, rwatson, pjd, mckusick, takawata,
                murray, cjh, brooks, daichi, delphij, ups, rrs
Thu, 1 Jun 2006
[ 12:13 ehaupt search for other commits by this committer ] Original commit  (Only the first 10 of 83 ports in this commit are shown above. View all ports for this commit)
Add an additional mirror.
Thu, 23 Feb 2006
[ 10:40 ade search for other commits by this committer ] Original commit  (Only the first 10 of 2514 ports in this commit are shown above. View all ports for this commit)
Conversion to a single libtool environment.

Approved by:    portmgr (kris)
Sun, 19 Feb 2006
[ 11:39 ehaupt search for other commits by this committer ] Original commit  (Only the first 10 of 55 ports in this commit are shown above. View all ports for this commit)
Remove deprecated USE_REINPLACE
Tue, 15 Nov 2005
[ 06:52 ade search for other commits by this committer ] Original commit  (Only the first 10 of 1438 ports in this commit are shown above. View all ports for this commit)
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
Thu, 6 Oct 2005
[ 11:57 ehaupt search for other commits by this committer ] Original commit  (Only the first 10 of 107 ports in this commit are shown above. View all ports for this commit)
Change MAINTAINER address for my ports.

Approved by:    novel (mentor)
Sun, 18 Sep 2005
[ 00:13 pav search for other commits by this committer ] Original commit 
- Fix build on 4.X

PR:             ports/86282
Submitted by:   Emanuel Haupt <ehaupt@critical.ch> (maintainer)
Reported by:    krismail
Sat, 17 Sep 2005
[ 00:04 nork search for other commits by this committer ] Original commit 
Add MASTER_SITES.

PR:             ports/86238
Submitted by:   Emanuel Haupt <ehaupt@critical.ch> (maintainer)
Thu, 15 Sep 2005
[ 15:22 nork search for other commits by this committer ] Original commit 
Add exrtools 0.4, utilities for manipulating with HDR
images in OpenEXR format.

PR:             ports/84945
Submitted by:   Emanuel Haupt <ehaupt@critical.ch>

Number of commits found: 60