| non port: graphics/fortytwo/Makefile |
|
SVNWeb
|
Number of commits found: 30 |
|
Tue, 25 Apr 2023
|
[ 15:17 Christian Weisgerber (naddy)  ]    feb1fa3 (Only the first 10 of 1613 ports in this commit are shown above.  )
audio/opus: bump consumers after update to 1.4
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 14 Feb 2021
|
[ 23:21 nc ]   (Only the first 10 of 98 ports in this commit are shown above. )
Update a few GNUstep ports:
* devel/gnustep-make: Update to 2.8.0
* lang/gnustep-base: Update to 1.27.0
* x11-toolkits/gnustep-back: update to 0.28.0
* x11-toolkits/gnustep-gui: update to 0.28.0
Also bump PORTREVISION on dependent ports.
|
|
Sun, 3 Feb 2019
|
[ 15:37 theraven ] (Only the first 10 of 114 ports in this commit are shown above. )
Move Objective-C ports to the v2 GNUstep ABI.
* Bump the LLVM revision used for GNUstep to 7, the minimum to support
the new ABI.
* GNUstep-back does not work with lld, so mark it to use Gold (BFD LD
doesn't seem able to link Objective-C things).
* Turn off some annoying debug logs in GNUstep back, which generate
several messages per second when you move the mouse. These should
never have been enabled in a release build anyway.
* Downgrade Cenon to 4.0.2. This was the last version to actually work
with GNUstep (the later ones use XCode >= 5 .xib files, which GNUstep
can't parse).
* Update gorm to git head. The current release doesn't work with the
new Objective-C ABI, but -head has the patches to fix it.
* Update PikoPixel and add it to the gnustep-app meta-package.
* Update the three core GNUstep packages to the latest release.
* Update gnumail and pantomime to the latest release and fix a linking
error with the new ABI.
* Update GNUstep FTP to the latest version.
Reviewed by: bapt (previous version)
|
|
Wed, 26 Sep 2018
|
[ 15:23 brooks ] (Only the first 10 of 102 ports in this commit are shown above. )
Update Objective-C LLVM version to 6.0.
Fixes aarch64 build. Reduces depends on obsolete LLVM 4.0.
PR: 230116
Submitted by: mikael.urankar@gmail.com
Approved by: theraven (prior version)
Sponsored by: DARPA, AFRL
|
|
Sun, 3 Dec 2017
|
[ 12:23 theraven ] (Only the first 10 of 96 ports in this commit are shown above. )
Fix configure options for gnustep-make
We were not setting the flag to select the GNUstep ABI, so were defaulting to
using the GCC-compatible version, which was likely to trigger a lot of subtle
bugs. This was noticed when C++ exceptions thrown through Objective-C stack
frames caused segfaults.
|
|
Mon, 21 Aug 2017
|
[ 13:26 theraven ] (Only the first 10 of 156 ports in this commit are shown above. )
Update GNUstep core libraries.
Update the default Objective-C compiler.
Fix various build failures in GNUstep ports from newer versions of the GNUstep
core libraries and from changes to GNUstep Make.
Update various ports that use GNUstep and bump the portrevision of the ones
that haven't had a new release.
|
|
Mon, 8 Aug 2016
|
[ 13:46 mat ] (Only the first 10 of 80 ports in this commit are shown above. )
USE_BDB cleanup.
- USE_BDB=4x+ -> USES=bdb.
- USE_BDB=yes -> USES=bdb.
- USE_BDB=xx -> USES=bdb:xx.
Other modernisations when I see them.
PR: 209183
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 13 Jan 2016
|
[ 05:39 ak ]
- Remove unused USE_* knobs:
databases/mysql57-server
games/kajongg
textproc/ruby-htree
- Fix typos in USE_* knobs:
graphics/fortytwo
math/hexcalc
misc/gnustep-examples
www/h2o
- Remove unused BROKEN_alpha knob:
devel/directfb
- Remove user-settable knob:
multimedia/tovid
Approved by: portmgr blanket
|
|
Sat, 19 Sep 2015
|
[ 10:33 theraven ] (Only the first 10 of 159 ports in this commit are shown above. )
Make all GNUstep ports install into the System domain so that the Local domain
is available for stuff built from source.
Some ports were already installing in the System domain, for these just remove
the Makefile lines explicitly specifying the install domain.
The rest are installed in the Local domain, remove any overrides, update their
pkg-plists and any explicit paths in the Makefiles and then bump port revision.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D2977
|
|
Wed, 17 Jun 2015
|
[ 22:44 amdmi3 ]
- Strip library
|
|
Thu, 9 Apr 2015
|
[ 07:44 bapt ] (Only the first 10 of 91 ports in this commit are shown above. )
Convert bsd.gnustep.mk to USES=gnustep
Simplify gnustep ports
Hook into the regular ports framework:
- LIB_DEPENDS for library dependencies
- Use regular USE_LDCONFIG
Reuse USES=objc (automatic)
USE_GNUSTEP is now a macro to set the dependencies and build feature needed.
Accepted arguments: back base build gui
Merge deskutils/preferencepanes into deskutils/systempreferences
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Thu, 21 Aug 2014
|
[ 22:50 mandree ] (Only the first 10 of 119 ports in this commit are shown above. )
Berkeley DB cleanup, remove versions 4.0 ... 4.7.
- Mk/bsd.database.mk rewrite, new default to db5.
- db6 is eligible by default only if installed on the system.
- Bump PORTREVISION of all ports that directly depend on BerkeleyDB or
where USE_BDB is found in the port's directory
- Patch a few ports such that they will pick up or work with newer
versions.
- Add UPDATING entry
- Drive-by format fix for pks
- Drop BerkeleyDB option from mail/popular for now, requires more work.
- Exp-run logs linked from the PR below.
- Ports that do not build (IGNORE, BROKEN, etc.) have pro-forma changes
for new Berkeley DB, but are untested.
NOTE: please read UPDATING and the Wiki page before proceeding!
Announcement: http://lists.freebsd.org/pipermail/freebsd-ports-announce/2014-August/000090.html
Wiki reference: https://wiki.freebsd.org/Ports/BerkeleyDBCleanup
PR: 192690
Approved by: portmgr (implicit, PORTREVISION bump on unstaged ports)
|
|
Fri, 15 Aug 2014
|
[ 20:37 mandree ] (Only the first 10 of 522 ports in this commit are shown above. )
Upgrade OpenEXR and ilmbase to 2.2.0.
GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)
Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130
Couple OpenEXR more tightly to ilmbase and require its exact .so
version.
Add UPDATING note, and bump PORTREVISION of all dependent ports.
Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.
Approved by: portmgr (implicit for bumping PORTREVISION on unstaged ports)
|
|
Sun, 2 Feb 2014
|
[ 18:49 antoine ]
Stage support
|
|
Fri, 20 Sep 2013
|
[ 18:35 bapt ] (Only the first 10 of 1084 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
|
|
Sat, 13 Oct 2012
|
[ 13:39 dinoex ] (Only the first 10 of 174 ports in this commit are shown above. )
- cleanup comments
Feature safe: yes
|
|
Tue, 26 Jun 2012
|
[ 05:43 dinoex ] (Only the first 10 of 122 ports in this commit are shown above. )
- reset MAINTAINER
|
|
Sat, 5 Jun 2010
|
[ 06:14 dinoex ] (Only the first 10 of 19 ports in this commit are shown above. )
LICENSE LGPL21
|
|
Sun, 30 May 2010
|
[ 12:28 dinoex ] (Only the first 10 of 371 ports in this commit are shown above. )
- drop USE_GNUSTEP_PREFIX
|
|
Sat, 22 Aug 2009
|
[ 00:23 amdmi3 ] (Only the first 10 of 415 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with G
|
|
Fri, 6 Jun 2008
|
[ 13:35 edwin ] (Only the first 10 of 304 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Wed, 31 Jan 2007
|
[ 18:18 dinoex ] (Only the first 10 of 160 ports in this commit are shown above. )
- add category gnustep
PR: 103931
Approved by: pav
|
|
Sat, 13 Jan 2007
|
[ 10:55 dinoex ] (Only the first 10 of 28 ports in this commit are shown above. )
- use new macros
|
|
Thu, 30 Nov 2006
|
[ 17:19 dinoex ]
FT is a generic, native graph management system for GNUstep and Cocoa and
is written in Objective-C. With FT you can persistently manage graphs
consisting of nodes and edges. Each node may provide so-called services.
Such a service may be e.g. a dictionary services, which all nodes provide
at present. This service allows the storage of any data in a node and is
based on keys which uniquely identify content within a dictionary.
WWW: http://FortyTwo.sourceforge.net/index.html
|
Number of commits found: 30 |
As an Amazon Associate I earn from qualifying purchases.