| non port: graphics/guilib/Makefile |
|
SVNWeb
|
Number of commits found: 47 |
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat)  ]  305f148 (Only the first 10 of 29333 ports in this commit are shown above.  )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 8 Nov 2019
|
[ 14:36 tobik ]   (Only the first 10 of 74 ports in this commit are shown above. )
graphics: Add missing USES={gl,gnome,sdl}
|
|
Sun, 21 Apr 2019
|
[ 19:09 sunpoet ]
Update MASTER_SITES and WWW
Approved by: portmgr (blanket)
|
|
Sat, 23 Dec 2017
|
[ 14:53 tijl ]
Drop USE_AUTOTOOLS. It has no effect here.
|
|
Sat, 18 Apr 2015
|
[ 09:47 tijl ] (Only the first 10 of 41 ports in this commit are shown above. )
- Remove libtool hacks and patches that are now handled by USES=libtool
- Remove CONFIG_SHELL from CONFIGURE_ENV because bsd.port.mk handles that
|
|
Sun, 21 Dec 2014
|
[ 18:00 amdmi3 ]
- Strip library
Approved by: bapt
|
|
Mon, 8 Dec 2014
|
[ 16:48 tijl ] (Only the first 10 of 920 ports in this commit are shown above. )
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used. (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Wed, 2 Jul 2014
|
[ 23:35 amdmi3 ]
- Switch to USES=libtool, drop .la files
Approved by: portmgr blanket
|
|
Sun, 2 Feb 2014
|
[ 14:55 miwi ]
- Stage support
- Convert to USES
|
|
Thu, 31 Oct 2013
|
[ 04:17 eadler ] (Only the first 10 of 28 ports in this commit are shown above. )
The word 'very' has no place in COMMENT
COMMENT should not begin with 'A' or 'An'
Maintainers were notified and given time to object.
|
|
Fri, 20 Sep 2013
|
[ 18:35 bapt ] (Only the first 10 of 1084 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
|
|
Sat, 18 Feb 2012
|
[ 10:18 mva ] (Only the first 10 of 537 ports in this commit are shown above. )
- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions
Tested by: exp-run by pav
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Tue, 5 Oct 2010
|
[ 19:57 ade ] (Only the first 10 of 235 ports in this commit are shown above. )
Round one migration of ports from automake{19,110} to automake111
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 22 Apr 2008
|
[ 16:08 acm ]
- Bump PORTREVISION
|
[ 16:07 acm ]
- Tarball was rerolled, now it installs two new files
- Remove BROKEN state
PR: 122935
Submitted by: Ganael Laplanche <ganael.laplanche.. at_martymac.com>
|
|
Thu, 10 Apr 2008
|
[ 21:36 pav ]
- Mark BROKEN:
size mismatch: expected 345034, actual 345042
Reported by: pointyhat
|
|
Fri, 28 Mar 2008
|
[ 01:10 acm ]
- Update to 1.2.1
- Remove obsolete patch file
|
|
Thu, 13 Mar 2008
|
[ 14:28 miwi ] (Only the first 10 of 442 ports in this commit are shown above. )
- Chase devel/sdl12 shlib version bump
|
|
Sat, 28 Jul 2007
|
[ 06:33 ade ] (Only the first 10 of 154 ports in this commit are shown above. )
Update to the autotools new world order.
Tested by: numerous package build runs
Approved by: portmgr
Thanks to: des, kris, linimon, pav
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Wed, 11 Apr 2007
|
[ 14:30 acm ]
- Fix build on all FreeBSD versions
Reported by: David J Brooks <daeg__at_houston.rr.com>
|
|
Tue, 10 Apr 2007
|
[ 20:40 acm ]
- Update to 1.2.0
|
|
Wed, 20 Sep 2006
|
[ 11:21 stas ] (Only the first 10 of 453 ports in this commit are shown above. )
- Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
structure (i.e. include/SDL for includes and sdl-config for configuration
binary)
- Update graphics/sdl_ttf to version 2.0.8
- Update graphics/sdl_image to version 1.2.5
- Update audio/sdl_mixer to version 1.2.7
- Update net/sdl_net to version 1.2.6
- Update Mk/bsd.sdl.mk accordingly
- Fix dependent ports to fit the new directory structure and avoid several
API breakages
- Bump up portrevisions for all dependent ports to allow them to be upgraded
by portupgrade/portmaster etc tools
Approved by: kris (portmgr), sem (mentor)
|
|
Sun, 23 Jul 2006
|
[ 02:45 acm ] (Only the first 10 of 71 ports in this commit are shown above. )
Change maintainer address to my @FreeBSD.org email
Approved by: garga (mentor)
|
|
Sat, 6 May 2006
|
[ 10:26 pav ]
- Update to 1.1.2
PR: ports/96811
Submitted by: Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe> (maintainer)
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Thu, 24 Nov 2005
|
[ 00:06 edwin ]
[PATCH] graphics/guilib remove broken size mismatch
- Correct size, md5
- Add SHA256
- Take maintainership
Changes in tarball:
diff -ru GUIlib-1.1.1-old/GUI_button.cpp GUIlib-1.1.1/GUI_button.cpp
--- GUIlib-1.1.1-old/GUI_button.cpp Thu Apr 6 14:48:51 2000
+++ GUIlib-1.1.1/GUI_button.cpp Fri Oct 21 14:00:59 2005
@@ -133,9 +133,9 @@
if (freebutton)
{
if (button)
- delete button;
+ SDL_FreeSurface(button);
if (button2)
- delete button2;
+ SDL_FreeSurface(button2);
}
if (freefont)
delete buttonFont;
PR: ports/89245
Submitted by: Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
|
|
Wed, 16 Nov 2005
|
[ 04:34 kris ]
BROKEN: Size mismatch
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Wed, 1 Jun 2005
|
[ 19:56 oliver ] (Only the first 10 of 45 ports in this commit are shown above. )
change the libtool version to use from 1.3 to 1.5
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Tue, 16 Mar 2004
|
[ 04:23 edwin ] (Only the first 10 of 193 ports in this commit are shown above. )
Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Mon, 8 Mar 2004
|
[ 01:01 edwin ] (Only the first 10 of 54 ports in this commit are shown above. )
Properly use SDL everywhere:
USE_SDL=yes -> USE_SDL=sdl (good examles everywhere)
WANT_SDL/HAVE_SDL instead of exists(localbase/lib/lib...)
See
http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/using-sdl.html
for more information on how to use USE_SDL, WANT_SDL and HAVE_SDL.
PR: follow-ups of ports/55494, ports/61877
Submitted by: Edwin Groothuis <edwin@mavetju.org>
|
|
Wed, 4 Feb 2004
|
[ 05:21 marcus ] (Only the first 10 of 1588 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
|
|
Tue, 5 Aug 2003
|
[ 05:49 daichi ]
update graphics/guilib: 1.1.0 -> 1.1.1
PR: 55245
Submitted by: KATO Tsuguru <tkato@prontomail.com>
|
|
Tue, 29 Jul 2003
|
[ 09:12 sobomax ] (Only the first 10 of 128 ports in this commit are shown above. )
Let be hohest: I really don't have a time now to properly maintain all
these great pieces of software, so that let others with more free time
to take over them.
|
|
Fri, 7 Mar 2003
|
[ 06:04 ade ] (Only the first 10 of 238 ports in this commit are shown above. )
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.
E Nomini Patri, E Fili, E Spiritu Sancti.
|
|
Thu, 2 Jan 2003
|
[ 15:06 sobomax ] (Only the first 10 of 75 ports in this commit are shown above. )
Update version number of SDL shared library.
|
|
Wed, 17 Apr 2002
|
[ 12:38 sobomax ] (Only the first 10 of 43 ports in this commit are shown above. )
Chase increase of libSDL version number.
|
|
Mon, 9 Apr 2001
|
[ 12:55 sobomax ] (Only the first 10 of 65 ports in this commit are shown above. )
Move: devel/sdl --> devel/sdl10 devel/sdl-devel --> devel/sdl12
|
|
Fri, 6 Apr 2001
|
[ 14:14 sobomax ]
Use SDL 1.2.0 by default.
|
[ 14:04 sobomax ]
Update MASTER_SITES and WWW.
|
|
Wed, 20 Sep 2000
|
[ 16:36 sobomax ]
Add guilib - a very simple GUI framework for use with SDL. Now we have a GUI
for console (SDL_VIDEODRIVER=svgalib) ;).
|
Number of commits found: 47 |
As an Amazon Associate I earn from qualifying purchases.