| non port: graphics/kdiagram/Makefile |
|
SVNWeb
|
Number of commits found: 20 |
|
Tue, 15 Aug 2023
|
[ 19:06 Tobias C. Berner (tcberner)  ]    c6274ee (Only the first 10 of 37 ports in this commit are shown above.  )
KDE: make ecm a build-only dependency in kde@ maintained ports
|
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias) ] ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above. )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 16 Oct 2021
|
[ 09:51 Jimmy Olgeni (olgeni) ] 4460cf7 (Only the first 10 of 476 ports in this commit are shown above. )
*: fix tab vs. space issues, and comments according to the guide.
|
|
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 18 Jan 2021
|
[ 16:07 tcberner ]  
graphics/kdiagram: update to 2.8.0
|
|
Tue, 21 Apr 2020
|
[ 19:45 tcberner ]
graphics/kdiagram: update to 2.7.0
|
|
Mon, 13 Apr 2020
|
[ 05:42 tcberner ]
graphics/kdiagram: update to 2.6.3
|
|
Sun, 29 Mar 2020
|
[ 10:51 tcberner ]
graphics/kdiagram: update to 2.6.2
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Sat, 19 Jan 2019
|
[ 08:36 tcberner ]
graphics/kdiagram: fix master sites.
|
|
Fri, 18 Jan 2019
|
[ 05:17 tcberner ]
graphics/kdiagram: update to 2.6.1
|
|
Wed, 16 Jan 2019
|
[ 11:13 tijl ] (Only the first 10 of 1089 ports in this commit are shown above. )
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 25 Dec 2018
|
[ 20:25 tcberner ] (Only the first 10 of 1277 ports in this commit are shown above. )
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sat, 20 Oct 2018
|
[ 16:46 tcberner ]
graphics/kdiagram: fix build with GCC-based architectures
PR: 232258
Submitted by: Piotr Kubaj <pkubaj@anongoth.pl>
|
|
Thu, 28 Jun 2018
|
[ 17:39 tcberner ] (Only the first 10 of 1416 ports in this commit are shown above. )
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
|
Sun, 18 Jun 2017
|
[ 07:41 rakuco ]
Drop PKGNAMESUFFIX.
We should just call the package "kdiagram", like the other Calligra ports.
Reported by: tcberner
|
|
Sat, 17 Jun 2017
|
[ 13:44 rakuco ] (Only the first 10 of 86 ports in this commit are shown above. )
Update the Calligra ports to 3.0.1.
The 3.x series is based on KDE Frameworks 5, and some programs have been split
into separate ports:
- Sheets, Words & co are in editors/calligra.
- Krita is in graphics/krita.
- Kexi is in databases/kexi.
- The calligra-l10n* ports are now part of editors/calligra itself.
Okular support in editors/calligra and Marble support in textproc/kreport have
been disabled for now because they need the KF5 version of those ports.
Thanks to everyone who's tested it and worked on it in our area51 repository.
Submitted by: Adrian de Groot <groot@kde.org>, tcberner, rakuco
Reviewed by: rakuco, mat (earlier versions)
Differential Revision: https://reviews.freebsd.org/D10167
|
Number of commits found: 20 |
As an Amazon Associate I earn from qualifying purchases.