08:08 Yasuhiro Kimura (yasu) 

graphics/klatexformula: Move man pages to share/man

Approved by:	portmgr (blanket)

    4bcfc3e

07:17 Michael Osipov (michaelo) 

*/*: Bump PORTREVISION for Ghostscript 10 change

Reported by:	sunpoet
Approved by:	jrm (mentor), sunpoet
Differential Revision:	https://reviews.freebsd.org/D42412

    fcf68ae5e

14:44 Muhammad Moinur Rahman (bofh) 

Mk/**tex.mk: Convert bsd.tex.mk to USES=tex

- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
  and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
  infrastructure and also in the ports which have been removed from the
  ports as those are redundant.

In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.

Reviewed by:	portmgr
Approved by:	portmgr (blanket)

    721e577

10:20 Felix Palmen (zirias) 

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

    ddae4e9

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

19:06 Dima Panov (fluffy) 

graphics/klatexformula: pet stage-qa

    0214418

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

01:19 hrs 

Fix build on 32-bit arch.

 

00:35 linimon 

Add USES=compiler:c++11-lang to fix build on GCC-based architectures.

Additionaly, this ports seems to have been erronously marked as deprecated
because of using Qt4. However, it uses Qt5, so undeprecate it.

PR:		235674
Submitted by:	Piotr Kubaj
Approved by:	portmgr (tier-2 blanket)

 

11:13 tijl 

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1]
https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2]
https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3]
https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

 

20:25 tcberner 

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

 

15:41 rene 

Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741

 

11:47 makc 

graphics/klatexformula:
- Update to 4.0.0 for Qt 5
- Remove stale patch
- Update WWW

PR:		232747
Approved by:	maintainer timeout (14 days)

 

17:39 tcberner 

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

 

03:41 hrs 

- Add LICENSE.
- Take maintainership.

 

15:58 rakuco 

Reassign makc's ports back to the pool.

See "Maintainer Reset" in
https://www.freebsd.org/portmgr/policies_contributors.html. makc's last commit
was in March 31st (r412218), and his ports have been timing out since at least
July (r418155).

I also emailed him 2 weeks ago and have received no response so far.

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

15:47 tijl 

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

17:48 hrs 

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be
   enabled when the library is available.

   This depends on *-base (RUN_DEPENDS).  USES=ghostscript:x11
   will set dependency on one of them.

- Fix integer overflow reported as CVE-2015-3228.

- Update Uses/ghostscript.mk:

 * Add x11 keyword.  nox11 keyword is now obsolete.

 * Use packagename in *_DEPENDS line to prevent relationship between
   -base and -x11 packages from being broken.

- Fix x11/nox11 keyword and bump PORTREVISION in ports using
  USES=ghostscript to update dependency of pre-compiled packages.

 

20:53 kwm 

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

 

21:46 makc 

- Switch my ports to USE_QT4=linguisttools_build and adjust Qt components
- Use LUPDATE/LRELEASE provided by bsd.qt.mk
- Drop needless stripping

 

18:28 makc 

graphics/klatexformula:
- Update to 3.2.11
- USES+= desktop-file-utils
- Remove upstreamed patch

 

14:06 tijl 

- Fix missing library problems when the linker enforces explicit linking

PR:		192062
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

10:25 makc 

Remove needless MAKE_ENV

 

09:40 makc 

graphics/klatexformula:
- Update to 3.2.8
- Add dependence on help2man and install man pages
- Fix build with clang-3.4

 

12:06 makc 

- Update to 3.2.7
- Convert to USES
- Remove superfluous dependency on hicolor-icon-theme
- Support staging

 

18:35 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

 

17:58 hrs 

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

 

02:00 hrs 

Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.

 

06:44 miwi 

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

05:26 dinoex 

- update png to 1.5.10

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

13:20 makc 

Update to 3.1.2

20:03 makc 

Add new port graphics/klatexformula:

KLatexFormula is a Qt4 program to easily get an image from a LaTeX
formula. Just enter a formula, click "Evaluate", then you can
drag&drop or copy the resulting image to another location (an
OpenOffice document, for example) or save it as an image (many
formats are available).

WWW:    http://klatexformula.sourceforge.net