| non port: graphics/libgltext/Makefile |
|
SVNWeb
|
Number of commits found: 31 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 022e658 (Only the first 10 of 771 ports in this commit are shown above. )
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua> (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 7 Aug 2021
|
[ 06:09 Tobias C. Berner (tcberner) ] 26620b9
graphics/libgltext: prepare for freetype2 update
- freetype2 will no longer ship freetype-config (which was a pkg-config
wrapper) in the near future -- use pkg-config to gather the required
flags.
PR: 251512
|
|
Tue, 22 Jun 2021
|
[ 18:53 Kevin Bowling (kbowling) ] da3162c (Only the first 10 of 914 ports in this commit are shown above. )
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 5 Nov 2019
|
[ 22:16 zeising ]   (Only the first 10 of 474 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories g
Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
|
|
Fri, 4 Aug 2017
|
[ 09:01 amdmi3 ]
- Switch to USES=localbase
- Switch to options helpers
- Unsilence installation commands
Approved by: portmgr blanket
|
|
Tue, 23 May 2017
|
[ 05:03 rezny ] (Only the first 10 of 711 ports in this commit are shown above. )
Revision bump of all ports with USE_GL after consolidation of mesa-libs
Approved by: swills (mentor)
Differential Revision: https://reviews.freebsd.org/D10845
|
|
Tue, 19 Jul 2016
|
[ 11:04 mat ] (Only the first 10 of 174 ports in this commit are shown above. )
When there is a do-install target, do not use a post-install target, do
everything at once. Sometime, rename post-install into a options helper
target.
I did not fix ports that were such a mess that I could not figure out
what they really wanted to do. I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.
With hat: portmgr
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Tue, 15 Jul 2014
|
[ 15:30 adamw ] (Only the first 10 of 18 ports in this commit are shown above. )
Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.
|
|
Mon, 23 Jun 2014
|
[ 13:47 amdmi3 ]
- Switch to USES=libtool, drop .la files
Approved by: portmgr blanket
|
|
Wed, 16 Apr 2014
|
[ 18:28 zeising ] (Only the first 10 of 1008 ports in this commit are shown above. )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 7 Apr 2014
|
[ 21:41 acm ]
- Fix install
- Add STAGE support
- Remove BROKEN
|
|
Fri, 31 Jan 2014
|
[ 21:32 antoine ]
Mark broken: Fails to install
install -o root -g wheel -m 444
/wrkdirs/usr/ports/graphics/libgltext/work/gltext-0.3.1/src/gltext.h
/usr/local/include
install: alpha/alpha: No such file or directory
*** Error code 71
Reported by: pkg-fallout since august 2013
With hat: portmgr
|
|
Fri, 20 Sep 2013
|
[ 18:35 bapt ] (Only the first 10 of 1084 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
|
|
Thu, 23 May 2013
|
[ 02:35 jgh ] (Only the first 10 of 14 ports in this commit are shown above. )
- adoption of optionsNG
- convert to USES in some cases (pkgconfig,pathfix)
- trim COMMENT/historical headers in some cases
Approved by: portmgr (miwi)
|
|
Sat, 4 Aug 2012
|
[ 22:52 kwm ] (Only the first 10 of 122 ports in this commit are shown above. )
Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.
Bump all ports that directly depend on libglut because of the shlib version
change.
There are some extra items in this patch.
*) Because freeglut doesn't have the same dependancies as libglut, some ports
need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
remains now.
*) While here fix a png related build issue games/vegastrike.
Thanks to miwi for running the exp-run.
Approved by: portmgr (miwi)
Collaboration with: zeising@
Obtained from: xorg-dev staging area.
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sat, 22 Aug 2009
|
[ 00:23 amdmi3 ] (Only the first 10 of 415 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with G
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Thu, 8 Jan 2009
|
[ 15:49 acm ]
- Fix typo
- Bump PORTREVISION
Reported by: pav
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Sat, 22 Mar 2008
|
[ 08:55 miwi ] (Only the first 10 of 58 ports in this commit are shown above. )
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION
Approved by: portmgr (xorg cleanup)
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Thu, 1 Feb 2007
|
[ 02:42 kris ] (Only the first 10 of 348 ports in this commit are shown above. )
Use libtool port instead of included version to avoid objformat a.out botch
|
|
Sun, 23 Jul 2006
|
[ 02:45 acm ] (Only the first 10 of 71 ports in this commit are shown above. )
Change maintainer address to my @FreeBSD.org email
Approved by: garga (mentor)
|
|
Sun, 9 Apr 2006
|
[ 18:01 pav ]
GLText is a portable font rendering library for C++ OpenGL applications. It
uses FreeType2 to read and render high-quality TrueType fonts with a minimal
footprint. With just a few easy lines of C++, you can add gorgeously
rendered text to your graphical applications.
GLText is an open source project licensed under the LGPL. Basically this means
that you can use and link your application with it regardless of what license
your application uses. If you make changes to GLText, however,
you must make those changes open source under the LGPL.
Written with portablility in mind, GLText works on Windows, Linux, FreeBSD and
IRIX - virtually anywhere that FreeType2 supports.
WWW: http://gltext.sourceforge.net
PR: ports/93617
Submitted by: Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
|
Number of commits found: 31 |
As an Amazon Associate I earn from qualifying purchases.