Number of commits found: 63

Fix recursive STAGEDIR referencing.

This was fixed after initial commit in bsd.ocaml.mk r349286.
    ===> Checking for items in STAGEDIR missing from pkg-plist
    Error: Orphaned: @dir
/wrkdirs/usr/ports/graphics/ocaml-images/work/stage/usr/local/%%OCAML_SITELIBDIR%%
    Error: Orphaned: @dir
/wrkdirs/usr/ports/graphics/ocaml-images/work/stage/usr/local/lib/ocaml
    Error: Orphaned: @dir
/wrkdirs/usr/ports/graphics/ocaml-images/work/stage/usr/local/lib
    ...

Ressurect devel/omake, graphics/ocaml-images and games/freetennis [1]

- devel/omake:
  - add new MASTER_SITES
  - regenerate patches [1]
- graphics/ocaml-images:
  - add missing LIB_DEPENDS
  - pet portlint
  - bump PORTREVISION
- games/freetennis:
  - add missing indirect depedencies [2]
  - bump PORTREVISION
PR:		210853 [1]
Submitted by:	lightside@gmx.com [1]
Reported by:	poudriere testport [2]

Deprecate ports broken for more than 6 months

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Update giflib to 5.1.1

PR:		204492

Remove trailing whitespace from Makefiles, A-L.

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

(Only the first 15 lines of the commit message are shown above )

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

Convert to USES=jpeg

Update graphics/giflib to 5.0.5

Differential Revision:	https://reviews.freebsd.org/D1361
Submitted by:	bapt
Reviewed by:	self
Exp-run by:	self

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

(Only the first 15 lines of the commit message are shown above )

print/freetype:
- Remove old libtool patch
- Remove :oldver from USES=libtool and bump dependent ports

ocaml update 4/4: graphics/ocaml-images, update to version 4.0.1

Ocaml 4.00 can't build ocaml-images 3.0.1, so the solution is to update
the package to a newer version.  This arrived from dports, but it has
been heavily modified since then.  It has also been staged.  The
pkg-plist needs work because it doesn't support all the options if they
are turned off.  GTK2 has been left OFF by default since it pulls in
136 packages when enabled.

The Ocaml framework did not support staging at the time, so several
knobs were turned off, especially the "WASH" function which disrupted pkg
greatly.  The options were cleaned up in a modern way too.  An additional
patch was addded to make clang happy so this builds on FreeBSD 10 inside
poudriere.

Urged by: portmgr(bapt)

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

Compilation of ocaml-images is no longer broken (tested on multiple systems).
Possibly silently fixed through update of a dependency.
Expiration notice removed.

Use GHOSTSCRIPT instead of GS to use generic description

Reported by:	danfe

In preparation of the removal of USE_FREETYPE from bsd.port.mk: remove
USE_FREETYPE from all ports using it

While here trim some headers, and do some conversion to new options framework.

Mark as deprecated a bunch of ports that are marked as broken for more than 6
month without a fix

Disable gtk1 support which depends on ocaml-lablgtk which is expired

Feature safe:	yes

- Mark BROKEN: does not compile
  ocamlopt.opt -o crop.opt   -I ../../src     camlimages_core.cmxa unix.cmxa 
crop.cmx
  ../../src/libcamlimages_core.a(gifread.o)(.text+0x3ea): In function
`dGifGetLine':
  : undefined reference to `PrintGifError'
  ../../src/libcamlimages_core.a(gifwrite.o)(.text+0x2f3): In function
`eGifPutLine':
  : undefined reference to `PrintGifError'

Reported by:    pointyhat

- update png to 1.5.10

- Switch from libungif to giflib to avoid conflict
- Mark MAKE_JOBS_UNSAFE since this failed for me with MAKE_JOBS enabled

PR:             ports/165369
Submitted by:   swills (myself)
Approved by:    <michael.grunewald@laposte.net> (maintainer)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Over to new volunteer

Submitted by:   Michael Grunewald <michael.grunewald@laposte.net>  (new
maintainer by mail)

- Bump portrevisions on all ocaml libraries, as it appears that compiled
  interface files (.cmi) are not backward compatible with a newer ocaml
  version.

PR:             ports/156195
Suggested by:   mandree

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Round one migration of ports from automake{19,110} to automake111

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

- fix after tiff update to 4.0.0
PR:             149611

- Fix package building (previously not all files were included).

- Use proper libpng library version.

Spotted by:     QAT

- Do not expose list_length.  This prevents the library to be used in
  games/freetennis, which links sdl_image library that exposes the
  same symbol.

- Enable Ghostscript by default (required by advi).
- Bump PORTREVISION.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Fix of previously QAT

Approved by:    miwi (mentor)

- Returning commit previously modified, because the lastest version is the 2.2
- Bump PORTPOCH

Approved by:    miwi (mentor)

- Update to 2.12

PR:             ports/139777
Submitted by:   sylvio@ (myself)
Approved by:    itetcu (mentor)

- update to jpeg7
Tested by:      pav on pointyhat

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.

Approved by:    portmgr (pav)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Reset marwan.burelle@lri.fr due to 6 months of inactivity, no response to
email, and various maintainer-timeouts.

Hat:            portmgr

- Fix LDFLAGS
- Install documentation

PR:             ports/93270
Submitted by:   Michael Winking <mwfp@foldl.net> <mwfp@alfa12.isp-service.biz>
Approved by:    maintainer timeout (4 months)

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

- Update graphics/libglut to 6.4.1.
- Shared lib version and PORTREVISION bumb for all affected ports.

While I'm here:
- Remove USE_MESA knob where it was (35 ports).
  It marked as depricated for 2 years.

PR:             ports/90247
Submitted by:   Ermal Lu?i <eri--@albabsd.org>

- Update version to 2.2 (newer than actual 2.11), also solve build problems
  appears with OCaml 3.09
- Pass maintainership to submitter

PR:             ports/89965
Submitted by:   Marwan Burelle <burelle@lri.fr>

- Fix permission of ld.conf. It should be 0644 instead of 0444.
- Unbreak unguilty ports.

BROKEN: Changes permission of installed usr/local/lib/ocaml/ld.conf file

upgrade to 2.11

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Use the new ghostscript options.

Submitted by:   linimon

- ECHO -> ECHO_MSG

for some ports:
- pre-fetch -> pre-everything

PR:             ports/56785-56799
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

[PATCH] graphics/ocaml-images: enable choose of ghostscript interpreter

        This patch allows the admin of the machine to choose either
        print/ghostscript-gnu or print/ghostscript-afp1

PR:             ports/54930
Submitted by:   Jens Rehsack <rehsack@liwing.de>

Change dependencies to depend on ghostscript-gnu instead of
ghostscript-afpl. Bump PORTREVISION.

ocaml-images depends on ocaml-lablgtk,
which in the default configuration depends on some gnome components,
which depend on some other gnome components,
which depend on gnomeprint
which depends on ghostscript-gnu.
Because the two ghostscript versions conflict with each other,
This port failed on bento.

We probably need some bsd.port.mk magic to deal with the different
ghostscript versions.

Reported by:    kris

ftp.inria.fr was rearranged; update MASTER_SITES.

Noticed by:     fenner's portsurvey

de-pkg-comment

add ocaml-images 2.10
Objective Caml image processing library

Number of commits found: 63

18 vulnerabilities affecting 97 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2019-08-23 22:19:20