15:10 tcberner 

Update poppler to 0.72

This update brings many changes
- the build system has switched to cmake
- some ports needed to be switched to use their bundled
  version of poppler:
  - print/tex-luatex (r487226)
  - print/tex-xetex (r487226)
  - editors/opeonffice-devel
- Qt4 support has been dropped
  - print/frescobaldi has been removed for this reason.
- most of the added patches can be removed with the next
  upgrade of the concerning port.

PR:		233452
Exp-run by:	antoine
Approved by:	gnome (kwm)
Differential Revision:	https://reviews.freebsd.org/D17456

 

19:19 olivierd 

- Update to 0.46.0
- Replace CPPFLAGS and LDFLAGS by USES= localbase

PR:		211388
Submitted by:	myself
Approved by:	The GNOME team (timeout)
Exp-run by:	antoine@

 

12:28 kwm 

Update poppler to 0.30.0 [1].

Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].

PR:		196599 [1]
Submitted by:	olivierd@ [1]
Exp-run by:	antoine@
Obtained from:	upstream [2]

 

12:55 makc 

graphics/poppler:
- Update to 0.26.3
- Add LICENSE_FILE
- Adjust dependencies
- Add new option, CURL
- Switch to USES=libtool
- Set proper install target instead of manual post-install stripping
- Add Qt5 support
- Use ${MOC} variable provided by Mk/bsd.qt.mk and
  remove needless pre-configure patching

PR:		192068, 194992
Submitted by:	olivierd, makc
Exp-run by:	antoine
Approved by:	kwm

 

23:43 kwm 

Update to 0.24.5.

Switch to USES=libtool

 

16:54 kwm 

Update poppler to 0.24.4.

Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.

Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.

 

05:27 mezz 

- Update poppler to 0.22.2.
- Bump the rest ports that depend on the poppler and poppler-qt because of
  shared library version have been changed.
- Add a note in the UPDATING for require to rebuild all ports that depend
  on poppler.

Submitted by:	kwm (poppler* part)

 

08:27 kwm 

Update to 0.18.4.

09:53 kwm 

Update poppler to 0.18.0.

The qt3 bindings are removed upstream.
The glib library lost the last gdk-pixbuf code. And rename it from
-gtk to -glib.

Thanks to:      pav for a exp-runs
                bapt for double checking the libreoffice ports

18:35 kwm 

Update to 0.16.7.

20:06 marcus 

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

Other major improvements include an updated HAL with better volume
probing code, ufsid integration, and support for volume names containing
spaces (big thanks to J.R. Oldroyd); a new WebKit; updated AbiWord;
an updated Gimp; and a preview of the new GNOME Shell project (thanks to
Pawel Worach).

The FreeBSD GNOME Team would like to that the following additional
contributors to this release whose patches and testing really helped
make it a success:

Andrius Morkunas
Dominique Goncalves
Eric L. Chen
J.R. Oldroyd
Joseph S. Atkinson
Li
Pawel Worach
Romain Tartière
Thomas Vogt
Yasuda Keisuke
Rui Paulo
Martin Wilke
(and an extra shout out to miwi and pav for pointyhat runs)

We would like to send this release out to Alexander Loginov (avl) in
hopes that he feels better soon.

PR:             136676
                136967
                138872 (obsolete with new epiphany-webkit)
                139160
                134737
                139941
                140097
                140838
                140929

05:56 marcus 

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

20:16 mezz 

First all, ahze did most of work. Thanks ahze! Last week or so, I am just
merely pick up and help him. Thanks to many testers in both private and
mailing list emails for report a few of build and dependencies problems.
Also, thanks to marcus and Chess Griffin for test in their tinderboxes.

x11/pixman: Update to 0.10.0
-------------------------------------------------------
Firefox 3 needs it. Orignal, the shared library was bumped and ahze has
added a new feature in our USE_GNOME=ltverhack by can control the number
of shared library. To control the number of shared library, add the
ltverhack:N. Right now pixman has USE_GNOME=ltverhack:9 to make it stays
same at libpixman-1.so.9. If anyone want to use ltverhack:N in one of your
port, you need to make sure the ABI doesn't change to use it..
-------------------------------------------------------

graphics/cairo: Update to 1.6.4
-------------------------------------------------------
Firefox 3 needs it. We have updated most cairo binding ports too.
-------------------------------------------------------

graphics/poppler: Update to 0.8.3
-------------------------------------------------------
The shared libraries version have been changed. All ports that depend on
poppler have PORTREVISION bump. The graphics/py-poppler has been updated
to 0.8.1 to work with newer poppler better. As for the poppler-qt, there
is no shared library version change.
-------------------------------------------------------

www/firefox3 and gecko ports related: Update to 3.0 final
-------------------------------------------------------
The bsd.gecko.mk has been moved from www/mozilla/ to Mk/. You no longer
need to include bsd.gecko.mk/Makefile.common by manual. We are keeping it
in backward compatibility, so the rest ports won't be break. We haven't
add some other ports to have Firefox 3 support yet, so feel free to send
us patch or commit it by yourself (to committers). However, view in
bsd.gecko.mk for document.
-------------------------------------------------------

Approved by:    portmgr (marcus)

11:14 ahze 

Update to 0.5.9

08:35 marcus 

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,
jylefort and marcus have completed work on a port of HAL to FreeBSD.  This
will allow FreeBSD to take advantage of closer hardware interaction such
as auto-mounting CD-ROMs, USB drives, and music players; auto-playing
audio CDs; and managing laptop power consumption.

But where would this all be without our loyal testers and contributors?
Therefore, the FreeBSD GNOME team would like to thank the following users:

Phillip Neumann <pneumann@gmail.com>
tmclaugh
mux
Yuri Pankov <yuri.pankov@gmail.com>
chinsan
Thomas <freebsdlists@bsdunix.ch>
Brian Gruber <knightbg@yahoo.com>
Franz Klammer <klammer@webonaut.com>
Dominique Goncalves <dominique.goncalves@gmail.com>
Pascal Hofstee <caelian@gmail.com>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
backyard <backyard1454-bsd@yahoo.com>
Andris Raugulis <endrju@null.lv> <endrju@null.lv>
Eric L. Chen <d9364104@mail.nchu.edu.tw>
Pawel Worach <pawel.worach@gmail.com>
QuiRK on #freebsd-gnome
Shane Bell <decept0@gmail.com>
luigi
sajd on #freebsd-gnome
sat
Chris Coleman <chrisc@vmunix.com>
kaeru on #freebsd-gnome
crsd_ via irc.freenode.org/#FreeBSD-GNOME
Joel Diaz <joeldiaz@mac.com>

Enjoy!

Approved by:    portmgr (implicit, kris)

02:24 marcus 

Fix the poppler-utils build.