Number of commits found: 89

Update ImageMagick to 6.9.10.14 [1]

* Add PKGNAMESUFFIX and rename the directory. This was done to show
  that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.

Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.

Chase these changes in all the ports that using IM6.

PR:		225102 (based on, only the version update) [1]
Submitted by:	Pascal Christen <pascal.christen@hostpoint.ch>

ImageMagick to 6.9.9-15.

* Disable FPX (FlashPix) support by default. This image format is really
  rare these days coupled with that there are known CVE's in libfpx and
  it doesn't seem to be maintained these days. It doesn't make sense to
  keep it enabled by default anymore. [1]
* Add new option for RAW support
* Fix portscout macro to only show 6.9.x versions

Bump other ports for the shared library bumps in IM 6.

PR:		222309 [1]
Submitted by:	Anton Yuzhaninov <citrin+pr@citrin.ru> [1]

Bump PORTREVISION in ports depending on archivers/libzip.

libzip was updated to 1.3.0 in r450774, and its SOVERSION went from .4 to .5
after the removal of zip_archive_set_tempdir(). All dependent ports continue to
build fine without that symbol.

PR:		222638

Allow building with ImageMagick-7. Also, fix the problem that struck, when
libzip.so is present at build-time -- the port's configure would enable
one more module breaking plist. The libzip.so is now an unconditional
dependency -- whoever wants to, can make it an option.

Chase ImageMagick shlib bump

- update libgd to 2.2.2
- new MASTER_SITES
- add security patch
PR:		210913
Submitted by:	Piotr Kubaj
MFH:		2016Q3
Security: CVE-2015-8874
Security: CVE-2016-3074
Security: http://www.openwall.com/lists/oss-security/2016/07/12/4

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Clarify LICENSE
- Switch to USES=localbase
- Switch to options helpers

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

(Only the first 15 lines of the commit message are shown above )

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

Update ImageMagick to 6.9.0-10.

- USES=pkgconfig:both since the *-config scripts are wrappers around pkg-config.
- Don't require ghostscript for the freetype2 option.
- Actualy remove the pkg-help file with is obsolete since r377347 when the
  library names where normalized.

Due to libMagick++-6.so bump, chase depend ports.

Upgrade to 3.70.

PR:		197439
Submitted by:	Ports Fury.

Update ImageMagick to 6.9.0.4.

- Normalize the ImageMagick library name so it stays the same regardless of
  what the 16-bit and HDRI option are set to [1]. Teach cmake to look for
  the new name. Bump ports that link to the libraries due to this.
- As a result do away with the "HALFSUPPORTED" option block, and list
  16-bit and HDRI with the other options.
- ImageMagick ships a basic SVG plugin when not using librsvg2 for SVG
  support. This basic SVG plugin needs libxml2 to work [2]. Make libxml2
  a mandatory dependency (instead of only when the SVG option was selected).
- Don't touch .keep files in the modules directory, there files there so
  it useless.

PR:		194949 [1]
PR:		195227 [2]
Requested by:	many [1]
Submitted by:	software-freebsd@interfasys.ch [2]

Remove * from LIB_DEPENDS lines and specify the default library name
for ImageMagick. Using '*' it is unsupported and potention bugs here.

- graphics/ming: Add USES=libtool and bump dependent ports
- graphics/autotrace: Remove PTHREAD_CFLAGS and PTHREAD_LIBS
- graphics/pencil: Fix dependencies

Update to 6.8.9-3 [1][3].

Use USES=compiler:openmp for the OPENMP option[2]
Ditch the use of perl for patching etc [4] and silence perl threaded check [6]
-delay option spurious message should be fixed [5]

JASPER option was replace by JPEG2000 for JP2k support.
Put 16BIT_PIXEL and HDRI option separate option block. These options change
  the library name, so the user needs to take this into consideration.
Use new LIB_DEPENDS syntax.
Use @sample for config files.
Sprinkle some USES=pkgconfig for some ports, since we don't pull it in
  anymore at run-time.

PR:		185462 [1]

(Only the first 15 lines of the commit message are shown above )

- Switch to USES=libtool, drop .la files

- Chase revision 353604 to graphics/plotutils.

See:    http://svnweb.freebsd.org/ports?view=revision&revision=353604

These ports are no longer used or cared for.

comms/spandsp-devel

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Strip library
- Fix typo

deskutils/kupfer

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Change install, cosmetical changes

(Only the first 15 lines of the commit message are shown above )

- Change maintainer email to @FreeBSD.org
- Use the new format for LIB_DEPENDS
- Support STAGEDIR and add OPTIONS_SUB
- Add DOCS and EXAMPLES Options
- Add MING to default Options
- Add patch, fix build on FreeBSD 10

Approved by:	pawel / wg (mentors, implicit)

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- update libdg to 2.1.0

- Update to 3.62

PR:		178849
Submitted by:	maintainer

Convert g* to USES=pkgconfig

This changes almost all the "gnomehack" only USE_GNOME cases to USES= pathfix.

If a port used other USE_GNOME items it was untouched.
The ports that used other USES were fixed by hand.

PR:		ports/177081
Reviewed by:	bapt
Approved by:	portmgr (miwi)

- Fix NOPORTDOCS=yes in /etc/make.conf
  .if ${PORT_OPTIONS:MDOCS}
  PLIST_SUB+= PORTDOCS=""
  .else
  PLIST_SUB+= PORTDOCS="@comment "
  .endif
  ${INSTALL_MAN} ${WRKSRC}/doc/${MAN1} ${MAN1PREFIX}/man/man1/
- Pass maintainership to submitter

PR:		ports/176824
Submitted by:	nemysis <nemysis@gmx.ch>

- Chase graphics/ImageMagick update
- Trim header

. licence is GPLv2 or later;
. use build target for USE_PKGCONFIG (more readable than just "yes");
. mark the new version as MAKE_JOBS_SAFE;
. the option -DHAVE_LIBGD is not needed anymore;
. remove ABI version from LIB_DEPENDS at options.

PR:		ports/172021
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>
Feature safe:	yes

- update to version 3.6.1. New or changed in 3.61:
  . fixed a bug in handling of -page option;
  . improved support for 64-bit systems related to different version of
ghostscript;
  . added some features for supporting the LaOS project
(http://www.laoslaser.org/).
- use two line style headers;
- remove ABI version from LIB_DEPENDS.

Feature safe:	yes

new devel/pkgconf added to replace devel/pkg-config. new version of pkg-config
are no more self hosting so we are stuck with 0.25 version while pkgconf provide
the same set of features as 0.27 and a compatible frontend. A symlink to
pkg-config has been added for convenience and compatibility

This also introduces a new macro to use pkgconf in your ports:
USE_PKGCONFIG

it can take the following arguments:
 - yes (meaning build only dep)
 - build (meaning build only dep)
 - run (meaning run only dep)
 - both (meaning run and build dep)

From now USE_GNOME= pkgconfig is deprecated in favour of USE_PKGCONFIG
The old gnome macro has been modified to use pkgconf but still the sameway: run
and build dep to avoid large breakage.

While here fix some ports relying on pkg-config but not specifying it, fix some
ports broken because testing wrong .pc files, and fix ports using pkg-config
--version to determine pkg-config version instead of
pkg-config --modversion pkg-config like recommanded by pkg-config

With Hat:	portmgr
Exp-runs by:	bapt (pointhat-west), beat (pointyhat)

For ports maintained by ports@ where pkgconfig is one of the USE_GNOME deps
convert it to BUILD_DEPENDS. This avoids the problem of the bogus run dep
added by bsd.gnome.mk.

Conver to new options framework

- update png to 1.5.10

Update to version 3.60

PR:             161638
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Update ImageMagick to 6.7.2-10 (shlib bumped to .5)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Chase graphics/ming shlib bump.

Reported by:    Jashank Jeremy <jashank.jeremy@gmail.com> (via irc)

 - Disable default swf support via graphics/ming, which is currently broken

Bump PORTREVISION after open-mofit update

- Mark MAKE_JOBS_UNSAFE. [1]
- Use bsd.port.options.mk.
- Get rid of MD5 in distinfo.

PR:             ports/152895 [1]
Submitted by:   amdmi3 [1]

Sync to new bsd.autotools.mk

Update ImageMagick to 6.6.2-10

- Bump Magick++, MagickWand or MagickCore dependency

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update to 3.50

PR:             138278
Submitted by:   Ports Fury

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update ImageMagick to 6.4.9.2
- Libraries Magick++, MagickCore and MagickWand bumped to 2
- Update all ports using libraries above

- Chase graphics/ImageMagick shlib version bump

Pointyhat to: mi@

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Update to 3.45

PR:             116927
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.

Approved by:    portmgr (pav)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

- Change dependencies reflecting update in graphics/ImageMagick
- Bump PORTREVISION

Chase shlib bump in graphics/ming

upgrade to 3.44

PR:             95114
Submitted by:   Ports Fury

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Chase libversion bumb to libMagick.so.9

PR:             ports/91270

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Update to 3.42

PR:             86679
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

upgrade to 3.41

PR:             85381
Submitted by:   Ports Fury

change the libtool version to use from 1.3 to 1.5

- Chase ImageMagick shlib bump

PR:             ports/78455
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (ImageMagick's
maintainer)

Bump portrevision and dependency on ImageMagick
in order to trace recent ImageMagick update.

Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com>
PR:             ports/74487
Approved by:    mat
Reviewed by:    lofi

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

The EMF/WMF backend has been supported by pstoedit since version 3.32,
so enable it.

PR:             ports/62223
Submitted by:   KOMATSU Shinichiro <koma2@jiro.c.u-tokyo.ac.jp>

Use the new ghostscript options.

Submitted by:   linimon

- Fix build on 5.x
- Pet portlint

PR:             58543 58064
Submitted by:   Fritz Heinrichmeyer, Larry Rosenman

Bump libMagick++ soversion.

- ECHO -> ECHO_MSG

for some ports:
- pre-fetch -> pre-everything

PR:             ports/56785-56799
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

[PATCH] graphics/pstoedit: enable choose of ghostscript interpreter

        This patch allows the admin of the machine to choose either
        print/ghostscript-gnu or print/ghostscript-afp1

PR:             ports/54932
Submitted by:   Jens Rehsack <rehsack@liwing.de>

update graphics/pstoedit:
  - Utilize USE_GNOME

PR:             55056
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

de-pkg-comment

Change CPPFLAGS+=/LDFLAGS+= to CPPFLAGS=/LDFLAGS=.

Submitted by:   Ports Fury

Update to 3.33.

PR:             ports/47331
Submitted by:   Ports Fury

fix dependencies
support NOPORTDOCS

PR:             42737
Submitted by:   Ports Fury

Update to 3.32.

Update to 3.31

PR:             35791
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

o update to 3.30   o support NOPORTDOCS in PLIST   o add WWW tag to PLIST    

Remove jseger and torstenb from maintainership of their ports, they   have been
inactive for too long    

Replace the ghostscript6 dependencies with ghostscript-gnu.    

Tweak DISTNAME    

Upgrade to 3.21.    

remove deprecated fetch options from FETCH_BEFORE_ARGS    

Number of commits found: 89

14 vulnerabilities affecting 198 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2018-12-15 15:04:36