notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
NOTE: the WWW: line in pkg-descr was relocated to a WWW= line in Makefile. Each port in FreshPorts has a homepage link. Look for it right after the Description: on each port's home page.

Do I know someone who can pick up a server from 7401 E. Ben White Blvd. Austin TX?

The emphasis is on know, or recommended by someone I know. This is the original FreshPorts server, way past useful: RAID, 8GB RAM, etc. The drives need to be wiped and everything recycled.
non port: graphics/py-pillow/Makefile
SVNWeb

Number of commits found: 53

Wed, 7 Sep 2022
[ 21:10 Stefan Eßer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 20 Jul 2022
[ 14:22 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:022e658bd10b8753ede87b3dfda087efabddac98  commit hash:022e658bd10b8753ede87b3dfda087efabddac98  commit hash:022e658bd10b8753ede87b3dfda087efabddac98  022e658  (Only the first 10 of 771 ports in this commit are shown above. View all ports for this commit)
graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 7 Jul 2022
[ 21:42 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:376996b9085ae575de4f2e511c6b1f5bddb8182d  commit hash:376996b9085ae575de4f2e511c6b1f5bddb8182d  commit hash:376996b9085ae575de4f2e511c6b1f5bddb8182d  376996b 
graphics/py-pillow: Update to 9.2.0

Changes:	https://github.com/python-pillow/Pillow/releases
		https://pillow.readthedocs.io/en/stable/releasenotes/index.html
Sun, 22 May 2022
[ 04:37 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:cc6d0f66788002f8fe0679cf0c067d99885487e9  commit hash:cc6d0f66788002f8fe0679cf0c067d99885487e9  commit hash:cc6d0f66788002f8fe0679cf0c067d99885487e9  cc6d0f6 
graphics/py-pillow: Update to 9.1.1

Changes:	https://github.com/python-pillow/Pillow/releases
		https://pillow.readthedocs.io/en/stable/releasenotes/index.html
Security:	CVE-2022-30595
Sat, 16 Apr 2022
[ 04:19 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:944366a55c0d341068bba7a83761d3d3409f3981  commit hash:944366a55c0d341068bba7a83761d3d3409f3981  commit hash:944366a55c0d341068bba7a83761d3d3409f3981  944366a 
graphics/py-pillow: Update to 9.1.0

Changes:	https://github.com/python-pillow/Pillow/releases
		https://pillow.readthedocs.io/en/stable/releasenotes/index.html
Wed, 30 Mar 2022
[ 23:46 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:f4ffd8dd2094a2b39254854901869f1ba7b7ef78  commit hash:f4ffd8dd2094a2b39254854901869f1ba7b7ef78  commit hash:f4ffd8dd2094a2b39254854901869f1ba7b7ef78  f4ffd8d 
graphics/py-pillow: Add IMAGEQUANT option

- Bump PORTREVISION for dependency change
[ 22:21 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:5309cc485d7269ca3dd373a23fe98839aec18040  commit hash:5309cc485d7269ca3dd373a23fe98839aec18040  commit hash:5309cc485d7269ca3dd373a23fe98839aec18040  5309cc4 
graphics/py-pillow: Update to 9.0.1

- Update pkg-descr

Changes:	https://github.com/python-pillow/Pillow/releases
Fri, 25 Mar 2022
[ 13:37 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:f206d557f83e870fa77948c1fd64f2e307c6f31c  commit hash:f206d557f83e870fa77948c1fd64f2e307c6f31c  commit hash:f206d557f83e870fa77948c1fd64f2e307c6f31c  f206d55 
graphics/py-pillow: Update to 8.4.0

- Change MASTER_SITES from GitHub to CHEESESHOP

Changes:	https://github.com/python-pillow/Pillow/releases
Mon, 7 Mar 2022
[ 19:24 Po-Chuan Hsieh (sunpoet) search for other commits by this committer ]    commit hash:9a140b31fe663fff77166c0bc6d78470bf6a57e5  commit hash:9a140b31fe663fff77166c0bc6d78470bf6a57e5  commit hash:9a140b31fe663fff77166c0bc6d78470bf6a57e5  9a140b3  (Only the first 10 of 33 ports in this commit are shown above. View all ports for this commit)
*/py-*: Take maintainership
[ 19:07 Rene Ladan (rene) search for other commits by this committer ]    commit hash:3d89f95e2ff861b1e06ad114422b5d116a856970  commit hash:3d89f95e2ff861b1e06ad114422b5d116a856970  commit hash:3d89f95e2ff861b1e06ad114422b5d116a856970  3d89f95  (Only the first 10 of 140 ports in this commit are shown above. View all ports for this commit)
all: return koobs' ports to the pool after safekeeping his commit bit.
Tue, 25 Jan 2022
[ 22:44 Daniel Engberg (diizzy) search for other commits by this committer ]    commit hash:0ca254d63aed1c4238d6fd998c6933287444f474  commit hash:0ca254d63aed1c4238d6fd998c6933287444f474  commit hash:0ca254d63aed1c4238d6fd998c6933287444f474  0ca254d 
*/*: Bump PORTREVISION of print/libraqm users

Bump due to new version of print/libraqm
Sat, 4 Sep 2021
[ 11:45 Bernhard Froehlich (decke) search for other commits by this committer ]    commit hash:5e047679e79adfd250e3ff5596d2caf42ec4fdf5  commit hash:5e047679e79adfd250e3ff5596d2caf42ec4fdf5  commit hash:5e047679e79adfd250e3ff5596d2caf42ec4fdf5  5e04767 
graphics/py-pillow: Fix CPE information

Approved by:	portmgr (blanket)
Thu, 13 May 2021
[ 20:05 Thierry Thomas (thierry) search for other commits by this committer ]    commit hash:553bcea9dbe91208a9c8bf265e0d8e1172094ffe  commit hash:553bcea9dbe91208a9c8bf265e0d8e1172094ffe  commit hash:553bcea9dbe91208a9c8bf265e0d8e1172094ffe  553bcea 
graphics/py-pillow: upgrade to 8.2.0 + fix vulnerabilities

- Release notes at <https://github.com/python-pillow/Pillow/releases/tag/8.2.0>

- Security fixes described at
<https://github.com/python-pillow/Pillow/pull/5377/commits/8ec027867f19633d9adfc5c8b7504d9b609fc5f1>

- Since I´m there, add newer optional dependencies.

Security:	CVE-2021-25287
Security:	CVE-2021-25288
Security:	CVE-2021-28675
Security:	CVE-2021-28676
Security:	CVE-2021-28677
Security:	CVE-2021-28678

PR:		255361
Approved by:	koobs (maintainer)
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Sat, 29 Feb 2020
[ 17:16 antoine search for other commits by this committer ] Original commit   Revision:527444
Limit py-pillow6 to python 2.7 to eliminate possible conflict with py-pillow

With hat:	portmgr
Mon, 24 Feb 2020
[ 11:36 kai search for other commits by this committer ] Original commit   Revision:526962 (Only the first 10 of 76 ports in this commit are shown above. View all ports for this commit)
graphics/py-pillow: Update to 7.0.0

* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
  backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
  dropped the support for Python 2.

* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
  consumers that can be built for Python 2 or newer.

* Exceptions are ports that can be built only for either Python 2 or
  Python 3.  For the first case, consumers are just assigned to the
  repo-copied graphics/py-pillow6.

* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
  listed in setup.py as a build dependency [1] and relax the version
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 25 Jan 2020
[ 09:54 kai search for other commits by this committer ] Original commit   Revision:524023
graphics/py-pillow: Update to 6.2.2

Changelogs since 6.2.0:

https://pillow.readthedocs.io/en/stable/releasenotes/6.2.2.html
https://pillow.readthedocs.io/en/stable/releasenotes/6.2.1.html

PR:		243336
Submitted by:	sunpoet
Approved by:	koobs (maintainer)
MFH:		2020Q1
Security:	0700e76c-3eb0-11ea-8478-3085a9a95629
Sat, 19 Oct 2019
[ 11:43 kai search for other commits by this committer ] Original commit   Revision:514792
graphics/py-pillow: Update to 6.2.0

Release Notes:

* https://pillow.readthedocs.io/en/latest/releasenotes/index.html

Detailed Changelog:

* https://github.com/python-pillow/Pillow/blob/6.2.0/CHANGES.rst

PR:		241268
Approved by:	koobs (maintainer)
MFH:		2019Q4
Security:	998ca824-ef55-11e9-b81f-3085a9a95629
Thu, 12 Sep 2019
[ 13:50 amdmi3 search for other commits by this committer ] Original commit   Revision:511883
- Update to 6.1.0
- Update WWW

PR:		239917
Submitted by:	amdmi3
Approved by:	maintainer timeout (koobs, a month)
Sat, 3 Aug 2019
[ 21:08 kai search for other commits by this committer ] Original commit   Revision:508031
graphics/py-pillow: Enable default support for LCMS

Convert the LCMS option, which installs graphics/lcms2 and enables the
bindings for LCMS (= Little Color Management System), into a default one.

The library liblcms2.so from graphics/lcms2 is already installed implicitly
through graphics/openjpeg using the default option JPEG2000 but Pillow's own
main library, _imaging.so, is not linked against it.

Thus do the same as in r504993 by making the LCMS option as default to get
real use out of liblcms2.so that has been already there.

Approved by:	koobs (maintainer)
Sun, 23 Jun 2019
[ 21:19 kai search for other commits by this committer ] Original commit   Revision:504993
graphics/py-pillow: Enable default support for TIFF images

Add the TIFF knob, which installs graphics/tiff and enables the bindings for
TIFF image support, to the default options.

The library libtiff.so from graphics/tiff is already installed implicitly
through graphics/openjpeg using the default option JPEG2000 but Pillow's own
main library, _imaging.so, is not linked against it.

Thus convert the TIFF option into a default one to gain real use of the
libtiff.so that has been already there.

Approved by:	koobs (maintainer)
Fri, 14 Jun 2019
[ 06:55 kai search for other commits by this committer ] Original commit   Revision:504161
graphics/py-pillow: Retain the alphabetic order of options

PR:		237426
Reported by:	koobs
[ 04:06 kai search for other commits by this committer ] Original commit   Revision:504155
graphics/py-pillow: Update to 6.0.0

 * Introduce a new option OLE and add it to the default options to maintain
   compatibility for a while with existing installations/users that rely on
   the previously deprecated function PIL.OleFileIO which has been removed
   now.

 * Remove obsolete CONFLICTS_INSTALL entry because graphics/py-imaging no
   longer exists in the Ports tree since 2016.

Release Notes:

 * https://pillow.readthedocs.io/en/latest/releasenotes/index.html

Backward Incompatible Changes (6.0.0):

 *
https://pillow.readthedocs.io/en/latest/releasenotes/6.0.0.html#backwards-incompatible-changes

Detailed Changelog:

 * https://github.com/python-pillow/Pillow/blob/6.0.0/CHANGES.rst

PR:		237426
Reviewed by:	antoine, koobs, Charlie Li
Approved by:	koobs (maintainer)
Tue, 29 Jan 2019
[ 16:32 miwi search for other commits by this committer ] Original commit   Revision:491582
- Update to 5.3.0
- Moved USES block above the OPTIONS block according to PHB and to pet portlint

Changes by upstream:
- https://github.com/python-pillow/Pillow/blob/5.3.0/CHANGES.rst

PR:		234613
Submitted by:	freebsd_ports@k-worx.org
Approved by:	maintainer timeout
Sponsored by:	iXsystems Inc.
Sun, 30 Sep 2018
[ 14:39 miwi search for other commits by this committer ] Original commit   Revision:480957
- Update to 5.2.0

Changes by upstream:
- https://github.com/python-pillow/Pillow/compare/5.0.0...5.2.0

PR:		231088
Submitted by:	freebsd_ports@k-worx.org
Approved by:	maintainer timeout
Sponsored by:	iXsystems Inc.
Wed, 20 Jun 2018
[ 17:05 mat search for other commits by this committer ] Original commit   Revision:472884 (Only the first 10 of 1617 ports in this commit are shown above. View all ports for this commit)
Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight
Sat, 17 Mar 2018
[ 05:21 koobs search for other commits by this committer ] Original commit   Revision:464756
graphics/py-pillow: Update to 5.0.0

- Update to 5.0.0
- Add TEST_DEPENDS, which was missing in previous port versions where
  test target was defined.
- Switch to using pytest, per upstream.
- Add comment to track actual (precise) supported Python versions.

Release Notes:

 * https://pillow.readthedocs.io/en/latest/releasenotes/index.html

Backward Incompatible Changes (5.0.0):

 *
https://pillow.readthedocs.io/en/latest/releasenotes/5.0.0.html#backwards-incompatible-changes

Detailed Changelog:

 * https://github.com/python-pillow/Pillow/blob/5.0.0/CHANGES.rst

PR:		226573 [1]
Submitted by:	Kevin Golding <ports caomhin org> [1]
Mon, 19 Feb 2018
[ 16:20 mat search for other commits by this committer ] Original commit   Revision:462332
When using opt_VARS and the value of the variable has space, it must be
quoted.

Sponsored by:	Absolight
Thu, 30 Nov 2017
[ 15:50 mat search for other commits by this committer ] Original commit   Revision:455210 (Only the first 10 of 2423 ports in this commit are shown above. View all ports for this commit)
Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sun, 30 Apr 2017
[ 12:50 sunpoet search for other commits by this committer ] Original commit   Revision:439814 (Only the first 10 of 38 ports in this commit are shown above. View all ports for this commit)
Update to 0.6.0

- Bump PORTREVISION for dependent ports

Changes:	https://chromium.googlesource.com/webm/libwebp/+/master/NEWS
Mon, 9 Jan 2017
[ 18:00 feld search for other commits by this committer ] Original commit   Revision:430992
graphics/py-pillow: Update to 3.4.2 (security fixes)

- Update to 3.4.2
- Add JPEG2000 option

Changes:	https://github.com/python-pillow/Pillow/blob/master/CHANGES.rst

PR:		215615
MFH:		2017Q1
Wed, 18 May 2016
[ 16:23 woodsb02 search for other commits by this committer ] Original commit   Revision:415455
Create new port graphics/py3-pillow:
- This is a variant of graphics/py-pillow for Python 3.x.
  A separate port is needed until the ports tree gets VARIANTS support.
  The science/gramps port will soon be updated to a version which only
  supports python3, and it depends on py-pillow with python3.
  To allow people to only use packages directly (and not ports),
  the package building infrastructure needs to build 2 packages:
  py-pillow with python2 and py-pillow with python3.
  Since the ports tree doesn't yet have VARIANTS support, this is not
  yet possible without making a separate py3-pillow port.
- Ensure graphics/py-pillow does not clobber USES and TKINTER_xxx_DEPENDS
variables in slave port
- Remove duplicate USES= line in graphics/py-pillow

PR:		207040
Approved by:	mat, adamw (mentors), koobs (maintainer)
Differential Revision:	https://reviews.freebsd.org/D6433
Fri, 1 Apr 2016
[ 14:00 mat search for other commits by this committer ] Original commit   Revision:412346 (Only the first 10 of 5103 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
[ 11:17 sunpoet search for other commits by this committer ] Original commit   Revision:412334 (Only the first 10 of 36 ports in this commit are shown above. View all ports for this commit)
- Update to 0.5.0
- Bump PORTREVISION for graphics/webp shlib change

Changes:	https://chromium.googlesource.com/webm/libwebp/+/master/NEWS
Thu, 25 Feb 2016
[ 10:54 koobs search for other commits by this committer ] Original commit   Revision:409505
graphics/py-pillow: Fix OPT_VARS, Enable WEBP by default

After converting if PORT_OPTIONS:MOPTION PYDISTUTILS_BUILDARGS to
OPTION_VARS=PYDISTUTILS_BUILDARGS in r409464 [1], it was reported
that the port failed to build with the following error:

  ValueError: --enable-tcl requested but tcl not found

Investigation revealed that only the first of the TKINTER_VARS{_OFF}
values was being assigned. The root cause appears to be that
OPTIONS_VARS=VAR=<value> does not support multiple space-separated
values, unless:

a) Values are quoted: OPTION_VARS=VAR="value1 value1", OR
b) Multiple assignments are made: OPTION_VAR=VAR+=value1 VAR+=value2
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 24 Feb 2016
[ 13:21 koobs search for other commits by this committer ] Original commit   Revision:409464
graphics/py-pillow: Update to 3.1.1, Modernize

- Update PORTVERSION and distinfo checksum (3.1.1)
- Convert remaining conditionals to to OPTIONS helpers
- Replace custom do-install and replace build/install target hacks
- Remove patches (upstream, were previously backported)
- Strip shared extensions
- Extend test suite

Changes:

  https://github.com/python-pillow/Pillow/blob/3.1.1/CHANGES.rst
Sat, 13 Feb 2016
[ 10:51 koobs search for other commits by this committer ] Original commit   Revision:408782
graphics/py-pillow: Backport security fixes

Backport security fixes from 3.1.1 release, resolving the following
vulnerabilities:

 * CVE-2016-0775: Buffer overflow in FLI decoding code
 * CVE-2016-0740: Buffer overflow in TIFF decoding code
 * Integer overflow in Resample.c [1]
 * Buffer overflow in PCD decoder [2]

[1] https://github.com/python-pillow/Pillow/issues/1710
[2] https://github.com/python-pillow/Pillow/issues/568

PR:		207053
Submitted by:	rakuco
MFH:		2016Q1
Security:	a8de962a-cf15-11e5-805c-5453ed2e2b49
Mon, 17 Aug 2015
[ 02:29 koobs search for other commits by this committer ] Original commit   Revision:394434
graphics/py-pillow: Update to 2.9.0

- Update to 2.9.0
- Change LICENSE_FILE path

Changes:

  https://github.com/python-pillow/Pillow/blob/2.9.0/CHANGES.rst
Mon, 22 Jun 2015
[ 18:33 antoine search for other commits by this committer ] Original commit   Revision:390310 (Only the first 10 of 374 ports in this commit are shown above. View all ports for this commit)
Convert to USES=jpeg
Thu, 7 May 2015
[ 15:17 mat search for other commits by this committer ] Original commit   Revision:385633 (Only the first 10 of 60 ports in this commit are shown above. View all ports for this commit)
Update ports in the games category to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight
Thu, 20 Nov 2014
[ 20:53 antoine search for other commits by this committer ] Original commit   Revision:372957
Unbreak
[ 10:53 mva search for other commits by this committer ] Original commit   Revision:372903
- Use TKINTER as default for py-pillow, since some ports
  (e.g. games/pysolfc) rely on it.

PR:		194818
Reported by:	Dana (dj9bsd@gmail.com)
With hat:	python@
Sat, 11 Oct 2014
[ 13:08 wg search for other commits by this committer ] Original commit   Revision:370635
graphics/py-pillow: fix typo in TIFF option

With hat:	python
Reported by:	Beeblebrox <zaphod berentweb com> (via email, freebsd-ports@)
Tue, 7 Oct 2014
[ 20:40 wg search for other commits by this committer ] Original commit   Revision:370397
graphics/py-pillow: fix build of tk extension

- Update to 2.6.0
- USES python

PR:		193958
Submitted by:	mva
Approved by:	koobs (maintainer)
Sun, 27 Jul 2014
[ 04:51 koobs search for other commits by this committer ] Original commit   Revision:363009
graphics/py-pillow: Update to 2.5.1, Add TKINTER option

- Update to 2.5.1
- OPTIONS: Add Tkinter (Tcl/Tk) support
- OPTIONS: Add FreeType as an options default

Changes:

  https://github.com/python-pillow/Pillow/blob/2.5.1/CHANGES.rst
Fri, 27 Jun 2014
[ 11:01 koobs search for other commits by this committer ] Original commit   Revision:359494
graphics/py-pillow: Update to 2.4.0

- Update to 2.4.0
- Chase upstream repository name change
- pkg-descr: Update WWW: URL

Changes:

  https://github.com/python-pillow/Pillow/blob/2.4.0/CHANGES.rst

PR:		189029
Submitted by:	oliverd (with changes, minus openjpg patch)
Thu, 8 May 2014
[ 03:25 sunpoet search for other commits by this committer ] Original commit   Revision:353249 (Only the first 10 of 20 ports in this commit are shown above. View all ports for this commit)
- Update to 0.4.0
- Add LICENSE
- Sort LIB_DEPENDS
- Use USES=libtool
- Do not silence installation message
- Bump PORTREVISION for graphics/webp shlib change

Changes:	https://chromium.googlesource.com/webm/libwebp/+/master/NEWS
Wed, 16 Apr 2014
[ 18:28 zeising search for other commits by this committer ] Original commit   Revision:351411 (Only the first 10 of 1008 ports in this commit are shown above. View all ports for this commit)
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 15 Feb 2014
[ 03:03 koobs search for other commits by this committer ] Original commit   Revision:344324
graphics/py-pillow: Update to 2.3.0, Add OPTIONS, Modernise

- Update to 2.3.0
- Add OPTIONS: FREETYPE JPEG LCMS PNG TIFF WEBP
- Enable STAGE support
- Enable AUTOPLIST support, delete pkg-plist
- Convert to new LIB_DEPENDS format
- Replace use of PYDISTUTILS_PKGNAME with PORTNAME:modifier
- Add LICENSE section
- Delete unecessary patches

Changes: https://github.com/python-imaging/Pillow/blob/2.3.0/CHANGES.rst

Based on extended version of patch provided in:

PR:		ports/186726
Submitted by:	tota
Fri, 20 Sep 2013
[ 18:35 bapt search for other commits by this committer ] Original commit   Revision:327733 (Only the first 10 of 1084 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
Thu, 25 Apr 2013
[ 13:49 koobs search for other commits by this committer ] Original commit   Revision:316516
- Update to 2.0.0
- Update and sort pkg-plist
- Use GitHub for distfiles
- Add regression-test: target

Approved by:	eadler (mentor)
Sat, 9 Feb 2013
[ 14:50 koobs search for other commits by this committer ] Original commit   Revision:311983 (Only the first 10 of 35 ports in this commit are shown above. View all ports for this commit)
Update MAINTAINER address for all my ports. While I'm here,
standardise and canonicalise Makefile header format and contents.

Approved by:	eadler (mentor)
Sun, 5 Aug 2012
[ 06:26 miwi search for other commits by this committer ] Original commit 
Pillow is the "friendly" PIL fork. PIL is the Python Imaging Library. Pillow
was started for and is currently maintained by the Plone community. But it is
used by many other folks in the Python web community.

WWW:	http://github.com/collective/Pillow

PR:		ports/168750
Submitted by:	koobs <koobs.freebsd@gmail.com>

Number of commits found: 53