notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
non port: graphics/py-qt4-svg/Makefile

Number of commits found: 38

Sunday, 2 Dec 2018
15:41 rene search for other commits by this committer
Mark QT4 ports/functionality for removal on 2019-03-15

While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.

Submitted by:	tcberner
Reviewed by:	adridg, jhale, rene, tcberner
Approved by:	portmgr (implicit, flavor hook)
Differential Revision:	https://reviews.freebsd.org/D17741
Original commitRevision:486467 
Thursday, 22 Nov 2018
20:18 tcberner search for other commits by this committer
pyqt: Change install directories for Python flavor support

* PyQt could not be installed for multiple Python versions at
  the same time, as there were conflicting files.

  This patch creates Python-version versioned directories for
  all these, and further installs binaries with a version number.

* Note, there might be some hickups for software that depends on
  on of the .so's provided by PyQt5, which might not be found
  anymore autmotically, and maybe need some LD-flaggery.

* Update PyQt5 to 5.10.1

* Mark www/py-qt5-webengine broken. It is unforuntately no longer
  compatible with the old qt5-webengine-5.9.4 we ship.

PR:		232745
Exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D8714
Original commitRevision:485614 
Thursday, 28 Jun 2018
17:39 tcberner search for other commits by this committer
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540
Original commitRevision:473503 
Sunday, 29 Apr 2018
16:19 tcberner search for other commits by this committer
Update the QScintilla2 ports to 2.10.4
Original commitRevision:468632 
Monday, 12 Mar 2018
18:06 tcberner search for other commits by this committer
Update py-sip to 4.19.8 and qscintilla2 to 2.10.3

PR:		226487
Exp-run by:	antoine
Original commitRevision:464266 
Sunday, 18 Feb 2018
09:55 rakuco search for other commits by this committer
Update QScintilla 2.10.2.

Upstream has renamed its libraries and we no longer need to patch
devel/qscintilla-qt5 to create a library whose name does not conflict with
devel/qscintilla's. However, the library names are different so we need to bump
PORTREVISION in several ports (the SOVERSION has changed too).

Thanks to antoine for the exp-run.

PR:		225928
Original commitRevision:462214 
Thursday, 30 Nov 2017
15:50 mat search for other commits by this committer
Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464
Original commitRevision:455210 
Saturday, 28 May 2016
12:32 pi search for other commits by this committer
devel/py-qt4-core cleanups in py-qt4-*

- Cleanup work on the py-qt4 ports, leading to a reduced runtime footprint.

PR:		209283
Submitted by:	groot@kde.org (kde), rakuco
Original commitRevision:415984 
Friday, 1 Apr 2016
14:00 mat search for other commits by this committer
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
Original commitRevision:412346 
Tuesday, 8 Dec 2015
16:49 rakuco search for other commits by this committer
PyQt: Replace bsd.pyqt.mk with Uses/pyqt.mk.

In preparation for landing PyQt5 ports, generalize devel/py-qt4's
bsd.pyqt.mk and make it a proper file in Uses/.

Ports wishing to depend on PyQt4 ports can now do the following:
  USES=		pyqt:4
  USE_PYQT=	foo bar_build baz_run

Other changes include the renaming of the PYQT4_DIST variable to PYQT_DIST
and the introduction of the PYQT_SIPDIR plist substitution variable. The
rest of the contents of Uses/pyqt.mk are pretty much identical to what we
had in bsd.pyqt.mk with additional processing of USE_PYQT.

Even though this patch touches files in many different ports, the goal is
for it to be a no-op from an end-user perspective (so that the basic
infrastructure is landed before the other, riskier changes): no dependencies
have been changed, PyQt/SIP/QScintilla have not been upgraded and the plists
should remain exactly the same, since PYQT_SIPDIR currently contains the
same value that used to be hardcoded in the plists.

Huge thanks to Guido Falsi (madpilot@) for spearheading most of the work: he
took the initiative to work on PyQt5 and sent D2910 to Phabricator with the
original version of this patch. Tobias Berner (tcberner@gmail.com) later
applied it to kde@'s experimental area51 repositories and did some more work
on it.
Original commitRevision:403297 
Wednesday, 4 Mar 2015
23:20 rakuco search for other commits by this committer
Update PyQt and its dependencies.

* PyQt4 has been updated to 4.11.3.
* QScintilla has been updated to 2.8.4.
* SIP has been updated to 4.16.5.

This update is much smaller than the previous one, as there has been no
further need for clean ups in the ports infrastructure.

Pretty much the entire patch set has been originally contributed by Tobias
Berner, who sent it to the KDE on FreeBSD mailing list. Thanks a lot!

PR:		198016
Submitted by:	Tobias Berner <tcberner@gmail.com>
Original commitRevision:380454 
Wednesday, 10 Sep 2014
20:50 gerald search for other commits by this committer
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)
Original commitRevision:367888 
Wednesday, 23 Jul 2014
19:53 rakuco search for other commits by this committer
Update PyQt to 4.11.1, QScintilla to 2.8.3 and SIP to 4.16.2.

... And bump PORTREVISION on ports that depend on devel/qscintilla2 due to
the shlib version change.

This is brought to you by the KDE on FreeBSD team. Besides updating to newer
upstream releases, this commit also contains a lot of under-the-hood changes
to the PyQt/QScintilla/SIP ports. Their Makefiles had accumulated a lot of
cruft over time, so it was time for some summer cleaning:

- General, belated changes:
  * Use OPTIONS helpers wherever possible, stop including
    <bsd.port.options.mk> when not necessary, stop checking for
    ${PORT_OPTIONS:MDOCS} and ${PORT_OPTIONS:MEXAMPLES} when not necessary,
    add options such as DOCS and/or DEBUG where they were only checked for.

- QScintilla ports:
  * Drop the API option from py-qt4-qscintilla2. It had been broken ever
    since staging support was added, and its existence does not make much
    sense: QScintilla is a hard dependency regardless of the state of this
    option anyway, they all come from the same tarball and the configuration
    script assumes the .api file will always be installed.

- PyQt ports:
  * The configure.py patch shared by all PyQt ports has been trimmed down to
    the minimum. Changes for Qt3 compatibility or for things that are just
    not needed anymore have been removed.

  * Several post-configure targets in the PyQt ports have been removed, as
    they had no effect on the way the ports were built whatsoever.

  * In some cases, instead of calling Python's py_compile.py on `ls *.py
    */*.py */*/*.py` to generate .pyc and .pyo files, we just call
    compileall.py, which is made for this kind of task.

  * The patch + sed hack to build py-qt4-dbussupport has been replaced by
    only extracting the dbus/ directory for that port and excluding it from
    all others.

  * Move the bulk of the code in all Makefiles to bsd.pyqt.mk, like the
    non-Python Qt ports do with bsd.qt.mk and the QT_DIST variable. A large
    portion of all PyQt Makefiles were very similar and contained a lot of
    boilerplate code that can be shared among all of them since they all
    come from the same tarball. bsd.pyqt.mk now has a PYQT4_DIST variable
    that, when set, automatically sets several common variables and the
    do-configure target for a port. This allows us to considerably reduce
    the size of all the py-qt4-* Makefiles.

  * To make the above possible and also to allow us to use as many OPTIONS
    helpers as possible, the ARGS variable is now called CONFIGURE_ARGS.
    That's what it was used for anyway.

PR:		191990
Original commitRevision:362721 
Sunday, 13 Jul 2014
23:36 bapt search for other commits by this committer
Modernize LIB_DEPENDS

With hat:	portmgr
Original commitRevision:361728 
Monday, 13 Jan 2014
21:00 rene search for other commits by this committer
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)
Original commitRevision:339634 
Tuesday, 15 Oct 2013
21:52 rakuco search for other commits by this committer
Update SIP to 4.15.2 and PyQt to 4.10.3.

This commit also adds proper staging support to all the ports being updated.

In collaboration with Schaich Alonso <alonsoschaich@fastmail.fm> and
Tomasz Kowalczyk <kowalczfbsd@gmail.com>.
Original commitRevision:330463 
Friday, 20 Sep 2013
18:35 bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
Original commitRevision:327733 
Sunday, 3 Feb 2013
18:16 makc search for other commits by this committer
KDE/FreeBSD team presents:
 SIP 4.14.3
 QScintilla 2.7
 PyQt 4.9.6

The area51 repository features commits by jhale and myself.

Changes:
- Trim Makefile header
- Convert to new option framework
Original commitRevision:311475 
Saturday, 9 Jun 2012
00:41 makc search for other commits by this committer
Merge changes from area51 repository (SVN commit 8197 by avilla):

- Remove SIPFILES option, some ports (e.g., pykde4) require the files
  to be installed.
- Remove DEBUG and TRACING options, and merge them under WITH_DEBUG.
Original commit
Wednesday, 6 Jun 2012
06:44 miwi search for other commits by this committer
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)
Original commit
Friday, 1 Jun 2012
05:26 dinoex search for other commits by this committer
- update png to 1.5.10
Original commit
Friday, 25 May 2012
01:49 makc search for other commits by this committer
KDE/FreeBSD team presents update for PyQt ports:
 - sip to 4.13.2
 - PyQt4 to 4.9.1
 - QScintilla to 2.6.1
Original commit
Tuesday, 24 Jan 2012
23:40 avilla search for other commits by this committer
- Pet Tinderbox and friends.

OPTIONSFILE must be set using ?= to allow overriding.

PR:             163743
PR:             163744
PR:             163745
PR:             163746
Submitted by:   A.J. Kehoe IV (Nanoman) <vOo4vyPj@nanoman.ca>
Original commit
Sunday, 16 Oct 2011
22:50 avilla search for other commits by this committer
- Update PyQt4 to 4.8.5.
- Update SIP to 4.12.4.
- Use common DISTINFO_FILEs.
Original commit
Tuesday, 11 May 2010
10:43 fluffy search for other commits by this committer
- The FreeBSD KDE team is pleased to announce SIP-4.10.2, PyQt-4.7.3
        and QScintilla-2.4.3 for FreeBSD.

With hat on:    kde@
Original commit
Sunday, 28 Mar 2010
06:47 dinoex search for other commits by this committer
- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi
Original commit
Friday, 5 Feb 2010
11:46 dinoex search for other commits by this committer
- update to jpeg-8
Original commit
Friday, 27 Nov 2009
00:10 miwi search for other commits by this committer
- Update py-qt4* to 4.6.2
- Update py-sip to 4.9.3

The KDE FreeBSD team would like to say thanks to all the helpers
and submitters.

Tested by:      pointyhat-exp-run (myself)
Original commit
Tuesday, 4 Aug 2009
19:18 miwi search for other commits by this committer
- Update py-qt4 to py-qt4.5.4
- Update qscintilla-2* to 2.4
- Update py-sip to 4.8.2
- Update py-kde to 1.16.3
- Update py-qt to 1.18.1

The KDE FreeBSD team would like to say thanks to all the helpers
and submitters

New Port:
devel/py-qt4-scripttools
Original commit
Saturday, 14 Feb 2009
22:58 makc search for other commits by this committer
Update PyQt4 ports to 4.4.4, new ports:
devel/py-qt4-help
multimedia/py-qt4-phonon
textproc/py-qt4-xmlpatterns
www/py-qt4-webkit

Update QScintilla2 to 2.3.2, PyQt3 to 3.17.6, PyKDE3 to 3.16.2.

Pass maintainership to kde@FreeBSD.org. Thanks Danny Ricin for his great work.

PR:             based on ports/130219
Submitted by:   Dima Panov" <fluffy at fluffy.khv.ru>
Original commit
Friday, 25 Jul 2008
22:24 miwi search for other commits by this committer
The first iteration of the py-qt4-* ports had a snapshot date as its
PORTVERSION. After that the PORTVERSION became 4.foo. Because this is
numerically lower than before, the PORTEPOCH should have been bumped.

Poked by:       kris@

PR:             125814
Submitted by:   Danny Pansters <danny@ricin.com> (maintainer)
Original commit
Friday, 6 Jun 2008
13:35 edwin search for other commits by this committer
Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)
Original commit
Thursday, 20 Mar 2008
12:40 miwi search for other commits by this committer
- Update to 4.3.3
- Configure.py now has a flag to specify component, patch is now simpler
- Update qscintilla2 so version where used
- Use bsd.pyqt.mk

Submitted by:   Danny Pansters <danny@ricin.com> (maintainer via private mail)
Original commit
Tuesday, 2 Oct 2007
09:58 miwi search for other commits by this committer
- Update to 4.3.1

Submitted by:   Danny Pansters <danny@ricin.com> (maintainer)
Original commit
Thursday, 13 Sep 2007
18:15 miwi search for other commits by this committer
- Update to PyQt-4.3

Submitted by:   Danny Pansters <danny@ricin.com> (maintainer via privat mail)
Original commit
Saturday, 19 May 2007
20:32 flz search for other commits by this committer
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
Original commit
Tuesday, 17 Apr 2007
20:00 miwi search for other commits by this committer
- Update to 4.2

Submitted by:   Danny Pansters <danny@ricin.com> (maintainer via privat mail)
Original commit
Tuesday, 27 Mar 2007
10:13 miwi search for other commits by this committer
PyQt4 is a set of Python bindings for Trolltech's Qt4 application framework.
This package provides the QtSvg module.

WWW: http://www.riverbankcomputing.co.uk/pyqt/

PR:             ports/109629
Submitted by:   Danny Pansters <danny at ricin.com>
Original commit

Number of commits found: 38