| non port: graphics/py-sorl-thumbnail/Makefile |
|
SVNWeb
|
Number of commits found: 29 |
|
Wed, 11 Jan 2023
|
[ 15:58 Dmitry Marakasov (amdmi3)  ]    77d6847 (Only the first 10 of 3335 ports in this commit are shown above.  )
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 022e658 (Only the first 10 of 771 ports in this commit are shown above. )
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua> (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 28 Apr 2022
|
[ 10:02 Kai Knoblich (kai) ] 0cf5531 (Only the first 10 of 81 ports in this commit are shown above. )
www/py-django32: Switch consumers over to Django 3.2
Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.
* Switch the most ports that use www/py-django22 to www/py-django32
* Switch www/seahub over to www/py-djangorestframework
* Ports that are not yet ready for Django 3.2 (only three so far) or
those that have already been set with an expiration date were not
taken into account.
* Bump PORTREVISION due dependency change where necessary.
PR: 261313
Reviewed by: bofh, dvl, koobs, ultima
Approved by: bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
Alexander Sieg (maintainers)
maintainer timeout (remaining maintainers)
Differential Revision: https://reviews.freebsd.org/D34859
|
|
Wed, 16 Feb 2022
|
[ 17:36 Li-Wen Hsu (lwhsu) Author: Kevin Golding ] 9b2c4b6
graphics/py-sorl-thumbnail: Update to 12.8.0
Changes:
https://github.com/jazzband/sorl-thumbnail/blob/de96f2b6c67748e6ec6aed50fb5f6cd75b7d3414/CHANGES.rst
PR: 261994
|
|
Sat, 11 Dec 2021
|
[ 13:50 Tobias C. Berner (tcberner) ] 45526ec (Only the first 10 of 146 ports in this commit are shown above. )
framework: Add new USES 'magick' for graphics/ImageMagick*
A new USES has been added to depend on ImageMagick.
USES=magick
adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.
If a specific version is required, use for example
USES=magick:6 resp. USES=magick:7
If only a build, run or test is required, use for example
USES=magick:build resp. USES=magick:6,build,test(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 14 Jan 2021
|
[ 14:34 dbaio ]   (Only the first 10 of 85 ports in this commit are shown above. )
Remove PY_SPHINX from ports using Python 3
Approved by: portmgr blanket
Differential Revision: https://reviews.freebsd.org/D28093
|
|
Mon, 11 May 2020
|
[ 23:51 dbaio ] (Only the first 10 of 144 ports in this commit are shown above. )
Update Sphinx
- Repocopy textproc/py-sphinx to textproc/py-sphinx18
Update it to 1.8.5 (latest version from 1.8.X).
This version supports Python 2 and 3.
Add test target.
- textproc/py-sphinx: Update to 3.0.2
Python 3 only (3.5+).
Add test target.
- Mk/Uses/python.mk: Add PY_SPHINX
(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 7 Apr 2020
|
[ 07:44 kai ]
graphics/py-sorl-thumbnail: Update to 12.6.3
* Assign to Django 2.2 (current LTS release) as Django 1.11 is End-of-Life.
* Make port concurrent safe as it installs files outside Python's site-lib
directory.
* Separate USES block from non-relevant variables and pet portlint
(whitespace issues in pkg-plist)
* Also remove an obsolete patch that was required to fix build issues with
the documentation files.
Changelog:
https://github.com/jazzband/sorl-thumbnail/blob/12.6.3/CHANGES.rst
PR: 245358
Approved by: Kevin Golding <ports@caomhin.org> (maintainer)
|
|
Tue, 24 Mar 2020
|
[ 19:54 antoine ] (Only the first 10 of 87 ports in this commit are shown above. )
Convert the tree to use PY_PILLOW
With hat: portmgr
Originally submitted by: kai
|
|
Mon, 24 Feb 2020
|
[ 11:36 kai ] (Only the first 10 of 76 ports in this commit are shown above. )
graphics/py-pillow: Update to 7.0.0
* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
dropped the support for Python 2.
* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
consumers that can be built for Python 2 or newer.
* Exceptions are ports that can be built only for either Python 2 or
Python 3. For the first case, consumers are just assigned to the
repo-copied graphics/py-pillow6.
* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
listed in setup.py as a build dependency [1] and relax the version (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 10 Nov 2018
|
[ 19:57 kwm ] (Only the first 10 of 157 ports in this commit are shown above. )
Update ImageMagick to 6.9.10.14 [1]
* Add PKGNAMESUFFIX and rename the directory. This was done to show
that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.
Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.
Chase these changes in all the ports that using IM6.
PR: 225102 (based on, only the version update) [1]
Submitted by: Pascal Christen <pascal.christen@hostpoint.ch>
|
|
Wed, 30 May 2018
|
[ 18:10 swills ]
graphics/py-sorl-thumbnail: Update default option
PR: 228561
Submitted by: Kevin Golding <ports@caomhin.org> (maintainer)
|
|
Sat, 26 May 2018
|
[ 17:14 miwi ]
- Update to 12.4.1
- Changed RUN_DEPENDS (assign to Django 1.11)
- Added LICENSE_FILE
- Added NO_ARCH
- Added DOCS option with the appropriate dependencies
- Changed options to reflect the new possibilities with the pluggable engines
and key value stores
- Updated pkg-descr
PR: 228309
Submitted by: freebsd_ports@k-worx.org
Approved by: maintainer
Sponsored by: iXsystems Inc.
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Sat, 16 Jan 2016
|
[ 11:19 miwi ] (Only the first 10 of 41 ports in this commit are shown above. )
- Switch forgotten ports over to py-django18
- Fix PYTHON_PKGNAMEPREFIX
Reported by: antoinebot
|
|
Mon, 17 Aug 2015
|
[ 14:20 mat ] (Only the first 10 of 271 ports in this commit are shown above. )
Remove UNIQUENAME and LATEST_LINK.
UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.
Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.
Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)
Reviewed by: antoine, bapt
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D3336
|
|
Sat, 6 Dec 2014
|
[ 22:13 feld ] (Only the first 10 of 13 ports in this commit are shown above. )
Update "BSD" license in graphics category
|
|
Sun, 5 Oct 2014
|
[ 00:09 wg ]
graphics/py-sorl-thumbnail: switch from py-imaging to py-pillow
- USES python
With hat: python
Approved by: portmgr (bdrewery, implicit)
|
|
Wed, 29 Jan 2014
|
[ 13:21 miwi ]
- Stage support
- Convert to PYDISTUTILS_AUTOPLIST
- Bump PORTREVISION
|
|
Mon, 13 Jan 2014
|
[ 21:00 rene ] (Only the first 10 of 702 ports in this commit are shown above. )
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by: python (mva, rm)
Approved by: portmgr-lurkers (mat)
|
|
Fri, 20 Sep 2013
|
[ 18:35 bapt ] (Only the first 10 of 1084 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
|
|
Thu, 23 May 2013
|
[ 02:35 jgh ] (Only the first 10 of 14 ports in this commit are shown above. )
- adoption of optionsNG
- convert to USES in some cases (pkgconfig,pathfix)
- trim COMMENT/historical headers in some cases
Approved by: portmgr (miwi)
|
|
Sat, 10 Dec 2011
|
[ 11:04 scheidell ]
- Fix checksum mismatch [1]
- Alternate patch submitted by maintainer
PR: 163024 [1]
Submitted by: Dulmandakh Sukhbaatar <dulmandakh@gmail.com> [1]
Approved by: ports@caomhin.org (maintainer), gabor (mentor)
Feature safe: yes
|
|
Fri, 25 Feb 2011
|
[ 03:19 miwi ] (Only the first 10 of 99 ports in this commit are shown above. )
- Move over to py25 or above
- While here get rid FreeBSD 6.X and md5 support
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sun, 13 Dec 2009
|
[ 00:28 miwi ]
The sorl-thumbnail package provides an easy way to generate image
thumbnails.
Although not required to use, sorl-thumbnail is heavily integrated with
the Django framework.
WWW: http://code.google.com/p/sorl-thumbnail/
PR: ports/140824
Submitted by: Kevin Golding <ports at caomhin.org>
|
Number of commits found: 29 |
As an Amazon Associate I earn from qualifying purchases.