non port: graphics/rubygem-gd2/Makefile |
SVNWeb
|
Number of commits found: 25 |
Sat, 14 Jan 2023
|
[ 23:08 Muhammad Moinur Rahman (bofh) ] 18c6e18 (Only the first 10 of 2869 ports in this commit are shown above. )
Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby
Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk
Notable changes are.
- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.
This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863
I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D37925
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 022e658 (Only the first 10 of 771 ports in this commit are shown above. )
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Mon, 4 May 2020
|
[ 21:31 dinoex ] (Only the first 10 of 72 ports in this commit are shown above. )
- update libgd to 2.3.0
- new option RAQM
- resurrect deprecated gdlib-config
- bump dependend ports
|
Wed, 20 Jul 2016
|
[ 09:33 dinoex ] (Only the first 10 of 77 ports in this commit are shown above. )
- update libgd to 2.2.2
- new MASTER_SITES
- add security patch
PR: 210913
Submitted by: Piotr Kubaj
MFH: 2016Q3
Security: CVE-2015-8874
Security: CVE-2016-3074
Security: http://www.openwall.com/lists/oss-security/2016/07/12/4
|
Wed, 27 Apr 2016
|
[ 21:57 swills ] (Only the first 10 of 1194 ports in this commit are shown above. )
Convert USES=gem:autoplist to USES=gem since autoplist is default
|
[ 16:36 swills ] (Only the first 10 of 1196 ports in this commit are shown above. )
create USES=gem and update rubygem- ports to use it
Note that for now ports still have to have USE_RUBY=yes to use USES=gem
PR: 209041
Differential Revision: https://reviews.freebsd.org/D6070
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
Thu, 2 Jul 2015
|
[ 16:01 pgollucci ] (Only the first 10 of 614 ports in this commit are shown above. )
Set NO_ARCH for remaining rubygem-* ports with no arch dependent files
Obtained from: DEVELOPER_MODE
With Hat: ruby@
Sponsored by: RideCharge Inc / Curb
|
Wed, 27 May 2015
|
[ 16:21 sunpoet ]
- Add LICENSE
- Update COMMENT
- Patch source file in post-patch: and match graphics/gd shlib version
- Remove REINPLACE_ARGS
- Update WWW
- Bump PORTREVISION for package change
|
Sun, 13 Jul 2014
|
[ 23:36 bapt ] (Only the first 10 of 69 ports in this commit are shown above. )
Modernize LIB_DEPENDS
With hat: portmgr
|
Fri, 24 Jan 2014
|
[ 14:55 miwi ] (Only the first 10 of 28 ports in this commit are shown above. )
- Stage safe
|
Fri, 20 Sep 2013
|
[ 18:35 bapt ] (Only the first 10 of 1084 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
|
Fri, 9 Aug 2013
|
[ 14:05 dinoex ] (Only the first 10 of 86 ports in this commit are shown above. )
- update libdg to 2.1.0
|
Wed, 8 Dec 2010
|
[ 23:08 avl ] (Only the first 10 of 28 ports in this commit are shown above. )
- Re-assign all my ruby* ports to ruby@
Discussed with: pgollucci, stas
|
Wed, 26 May 2010
|
[ 19:51 pgollucci ] (Only the first 10 of 121 ports in this commit are shown above. )
- Mass conversion of RF -> RG for MASTER_SITE for rubygem- ports
[RG aka rubygems.org]
PR: ports/147005
Submitted by: pgollucci (myself)
Approved by: portmgr (pav)
With Hat: ruby@
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
Thu, 28 May 2009
|
[ 20:44 avl ] (Only the first 10 of 84 ports in this commit are shown above. )
Change MAINTAINER on my ports to my FreeBSD email address
Approved by: tabthorpe (mentor)
|
Thu, 9 Apr 2009
|
[ 00:11 pgollucci ] (Only the first 10 of 144 ports in this commit are shown above. )
- convert to RUBYGEM_AUTOPLIST
remove x-generate-plist and friends
- use RF macro and remove SUBDIR where possible
- remove some uneeded GEM_NAME=${DISTNAME}
(this c/should be handled better in bsd.*.mk)
other deltas specific to individual ports:
audio/rubygem-mp3info - unbreak, fix packaging, bump PORTREVISION
devel/rubygem-rapt - adopt
devel/rubygem-rspec - remove BUILD_DEPENDS=RUN_DEPENDS -- neither set
devel/rubygem-ruby2ruby - add #' for vim highlight
graphics/rubygem-extifr - drop PORTREVISION=0
graphics/rubygem-gd2 - add #' for vim highlight
www/rubygem-rubyfulsoup - swap GEM_NAME / DISTNAME for constistency
Sponsored by: RideCharge Inc.
Tested on: RideCharge's Tinderbox
Reviewed by: stas
|
Sat, 14 Feb 2009
|
[ 01:03 miwi ] (Only the first 10 of 14 ports in this commit are shown above. )
- Fix plist after ruby update by generating it dynamically.
|
Sun, 6 Apr 2008
|
[ 08:58 stas ] (Only the first 10 of 124 ports in this commit are shown above. )
- Add ruby 1.9 support
- Implement new knobs for gems and rake (these are included in
ruby 1.9 distribution already). Also move gem bits from
ruby-gems/Makefile.common to bsd.ruby.mk[1]. Now to depend
on gems or rake you should define USE_RUBYGEMS/USE_RAKE
accordingly. Also RAKE_BIN variable is provided for
pointing to the right rake executable.
- Rewrite RUBY_SCHEBANG in awk to eliminate build dependency
on ruby.
Discussed with: Jonathan Weiss <jw@innerewut.de> [1] (gems maintainer)
Tested by: ports@
|
Sat, 9 Jun 2007
|
[ 23:49 miwi ]
Ruby binding for Thomas Boutell's gd 2.x graphics library
WWW: http://gd2.rubyforge.org/
PR: ports/113503
Submitted by: Alexander Logvinov <ports at logvinov.com>
|
Number of commits found: 25 |