notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
NOTE: There is a known problem on production with searching pkg-plist - it returns no results. This problem is not present on stage.freshports.org
non port: graphics/showimage/Makefile
SVNWeb

Number of commits found: 31

Sun, 11 Sep 2022
[ 10:20 Felix Palmen (zirias) search for other commits by this committer ]    commit hash:ddae4e92d8313a1461145e3b4f0232fe463feaee  commit hash:ddae4e92d8313a1461145e3b4f0232fe463feaee  commit hash:ddae4e92d8313a1461145e3b4f0232fe463feaee  ddae4e9  (Only the first 10 of 1105 ports in this commit are shown above. View all ports for this commit)
Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349
Wed, 7 Sep 2022
[ 21:10 Stefan E├čer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Mon, 5 Sep 2022
[ 19:06 Dima Panov (fluffy) search for other commits by this committer ]    commit hash:348bf1fe8404c68f59a9eab0fac7e7fb1346e483  commit hash:348bf1fe8404c68f59a9eab0fac7e7fb1346e483  commit hash:348bf1fe8404c68f59a9eab0fac7e7fb1346e483  348bf1f 
graphics/showimage: pet stage-qa
Wed, 20 Jul 2022
[ 14:22 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:022e658bd10b8753ede87b3dfda087efabddac98  commit hash:022e658bd10b8753ede87b3dfda087efabddac98  commit hash:022e658bd10b8753ede87b3dfda087efabddac98  022e658  (Only the first 10 of 771 ports in this commit are shown above. View all ports for this commit)
graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 22 Apr 2021
[ 07:54 Adriaan de Groot (adridg) search for other commits by this committer ]    commit hash:e9c54a7558d0411e55364c8aa03f8cd2ec38b489  commit hash:e9c54a7558d0411e55364c8aa03f8cd2ec38b489  commit hash:e9c54a7558d0411e55364c8aa03f8cd2ec38b489  e9c54a7  (Only the first 10 of 17 ports in this commit are shown above. View all ports for this commit)
KDE not-Applications: chase doctools

These ports use KDE Frameworks and require kdoctools to build. Since
that is no longer an implicit build & run dependency, (re)introduce it
explicitly as a build-time dependency.
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Sat, 14 Mar 2020
[ 17:42 tcberner search for other commits by this committer ] Original commit   Revision:528428
Make implicit dependency on devel/qt5-concurrent explicit
Fri, 26 Jul 2019
[ 20:46 gerald search for other commits by this committer ] Original commit   Revision:507372 (Only the first 10 of 3853 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330
Fri, 8 Feb 2019
[ 22:50 tcberner search for other commits by this committer ] Original commit   Revision:492466
Fix with build on GCC architectures.

PR:		235093
Submitted by:	Piotr Kubaj <pkubaj@anongoth.pl>
Wed, 16 Jan 2019
[ 11:13 tijl search for other commits by this committer ] Original commit   Revision:490472 (Only the first 10 of 1089 ports in this commit are shown above. View all ports for this commit)
Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 25 Dec 2018
[ 20:25 tcberner search for other commits by this committer ] Original commit   Revision:488341 (Only the first 10 of 1277 ports in this commit are shown above. View all ports for this commit)
Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine
Thu, 28 Jun 2018
[ 17:39 tcberner search for other commits by this committer ] Original commit   Revision:473503 (Only the first 10 of 1416 ports in this commit are shown above. View all ports for this commit)
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540
Fri, 31 Mar 2017
[ 10:33 tcberner search for other commits by this committer ] Original commit   Revision:437347
Update graphics/showimage to 0.10 and take maintainership.

Reviewed by:	mat, rakuco
Approved by:	rakuco (mentor), mat (mentor)
Differential Revision:	https://reviews.freebsd.org/D10191
Wed, 24 Aug 2016
[ 08:20 tcberner search for other commits by this committer ] Original commit   Revision:420774 (Only the first 10 of 364 ports in this commit are shown above. View all ports for this commit)
Replace Mk/bsd.kde4.mk by Mk/Uses/kde.mk in preparation for KDE Frameworks and
Plasma5 ports

At the moment KDE ports use bsd.kde4.mk to handle their dependencies. When
working on the ports for KDE Frameworks and Plasma5 it seemed to be more
reasonable to create a new kde.mk instead of adding an bsd.kde5.mk.

The kde.mk in this review is a stripped down version of the one we are using in
the KDE Test repositories plasma5 branch [1] to only contain the parts relevant
to the current KDE4 ports in the portstree [2].

Changes to the KDE Ports needed by this:

Replace USE_KDE4 by USE_KDE [3]
Add USES=kde:4 [4]
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 25 May 2016
[ 20:56 rene search for other commits by this committer ] Original commit   Revision:415864 (Only the first 10 of 328 ports in this commit are shown above. View all ports for this commit)
Remove expired misc/kdehier4 and update all of its consumers to not reference it
any
longer. This is a no-op because KDE4_PREFIX is equal to LOCALBASE

Fix up properties for misc/kde4-l10n/files/bsd.l10n.mk to make svn happy.

PR:		209014 (partial)
Submitted by:	myself
Approved by:	portmgr (bapt)
Differential Revision:	https://reviews.freebsd.org/D6542
Tue, 12 Jan 2016
[ 16:20 amdmi3 search for other commits by this committer ] Original commit   Revision:405891 (Only the first 10 of 791 ports in this commit are shown above. View all ports for this commit)
Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket
Fri, 25 Dec 2015
[ 23:42 amdmi3 search for other commits by this committer ] Original commit   Revision:404491
- Add LICENSE
[ 23:19 amdmi3 search for other commits by this committer ] Original commit   Revision:404485
- Reset maintainer by his own request

PR:		205570
Sun, 12 Oct 2014
[ 20:16 makc search for other commits by this committer ] Original commit   Revision:370736
graphics/showimage:
- update to 1.8.2

PR:		194271
Submitted by:	Rusty Nejdl (maintainer)
Wed, 10 Sep 2014
[ 20:50 gerald search for other commits by this committer ] Original commit   Revision:367888 (Only the first 10 of 3171 ports in this commit are shown above. View all ports for this commit)
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)
Fri, 15 Aug 2014
[ 20:37 mandree search for other commits by this committer ] Original commit   Revision:365038 (Only the first 10 of 522 ports in this commit are shown above. View all ports for this commit)
Upgrade OpenEXR and ilmbase to 2.2.0.

GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)

Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130

Couple OpenEXR more tightly to ilmbase and require its exact .so
version.

Add UPDATING note, and bump PORTREVISION of all dependent ports.

Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.

Approved by:	portmgr (implicit for bumping PORTREVISION on unstaged ports)
Sun, 16 Mar 2014
[ 19:25 makc search for other commits by this committer ] Original commit   Revision:348425
graphics/showimage:
- update to 1.8.1
- modernize Makefile (stage support, USES)
- trim COMMENT
- fix desktop file: only the showimage binary was renamed, the icon retains
  original name

PR:		ports/187638
Approved by:	Rusty Nejdl (maintainer)
Tue, 18 Feb 2014
[ 14:31 makc search for other commits by this committer ] Original commit   Revision:344898 (Only the first 10 of 241 ports in this commit are shown above. View all ports for this commit)
- Bump PORTREVISION after KDE4_PREFIX change
Fri, 20 Sep 2013
[ 18:35 bapt search for other commits by this committer ] Original commit   Revision:327733 (Only the first 10 of 1084 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
Wed, 14 Aug 2013
[ 22:35 ak search for other commits by this committer ] Original commit   Revision:324744 (Only the first 10 of 1725 ports in this commit are shown above. View all ports for this commit)
- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)
Fri, 22 Mar 2013
[ 20:06 makc search for other commits by this committer ] Original commit   Revision:314960 (Only the first 10 of 464 ports in this commit are shown above. View all ports for this commit)
- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)
Mon, 25 Feb 2013
[ 13:39 bdrewery search for other commits by this committer ] Original commit   Revision:312920
- Fix incorrect desktop entry referencing showimage
  instead of showimage-kde4
- Trim header

PR:		ports/176385
Submitted by:	Rusty Nejdl <rnejdl@ringofsaturn.com> (maintainer)
Wed, 6 Jun 2012
[ 06:44 miwi search for other commits by this committer ] Original commit  (Only the first 10 of 587 ports in this commit are shown above. View all ports for this commit)
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)
Fri, 1 Jun 2012
[ 05:26 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4371 ports in this commit are shown above. View all ports for this commit)
- update png to 1.5.10
Thu, 16 Feb 2012
[ 15:57 ashish search for other commits by this committer ] Original commit  (Only the first 10 of 379 ports in this commit are shown above. View all ports for this commit)
- Bump PORTREVISION to chase the update of multimedia/libvpx
Tue, 13 Dec 2011
[ 16:26 makc search for other commits by this committer ] Original commit 
Add new port graphics/showimage:

ShowImage is a simple KDE based image viewer using the maximum space
inside its window without cluttering the window with menubar, toolbar
or statusbar.

WWW:    http://kde-apps.org/content/show.php/ShowImage?content=143977

PR:             based on ports/162900
Submitted by:   Rusty Nejdl <rnejdl@ringofsaturn.com>
Feature safe:   yes

Number of commits found: 31