| non port: graphics/sswf/Makefile |
|
SVNWeb
|
Number of commits found: 38 |
|
Fri, 28 Jul 2023
|
[ 17:13 Daniel Engberg (diizzy)  ]    664a2fa (Only the first 10 of 502 ports in this commit are shown above.  )
*/*: Bump jpeg-turbo users treewide
New major version 3.0.0
|
|
Wed, 26 Jul 2023
|
[ 09:40 Muhammad Moinur Rahman (bofh) ] 6d0180d
graphics/sswf: Fix build with llvm16
Approved by: portmgr (blanket)
Sponsored by: The FreeBSD Foundation
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 022e658 (Only the first 10 of 771 ports in this commit are shown above. )
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua> (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 7 Aug 2021
|
[ 08:12 Tobias C. Berner (tcberner) ] 8252bf7
graphics/sswf: prepare for freetype2 update
- freetype2 will no longer ship freetype-config (which was a pkg-config
wrapper) in the near future -- use pkg-config to gather the required
flags.
PR: 251512
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 7 Jul 2018
|
[ 18:15 tobik ]  
graphics/sswf: Fix build with Clang 6
compiler.c++:419:21: error: comparison between pointer and integer ('const char
*' and 'int')
while(package_info != '\0') {
~~~~~~~~~~~~ ^ ~~~~
http://beefy11.nyi.freebsd.org/data/head-i386-default/p473790_s335878/logs/sswf-1.8.4_5.log
|
|
Sun, 22 Apr 2018
|
[ 09:33 amdmi3 ]
- Add LICENSE
- Switch to USES=localbase
- Switch to options helpers
- Update WWW
|
|
Fri, 1 Apr 2016
|
[ 14:00 mat ] (Only the first 10 of 5103 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight
|
|
Mon, 22 Jun 2015
|
[ 18:33 antoine ] (Only the first 10 of 374 ports in this commit are shown above. )
Convert to USES=jpeg
|
|
Wed, 15 Apr 2015
|
[ 08:20 tijl ] (Only the first 10 of 152 ports in this commit are shown above. )
converters/libiconv:
- Remove const qualifier from iconv(3) to match POSIX:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html
- Patch iconv.h to expose more GNU extensions when LIBICONV_PLUG is
defined because the base system iconv supports these extensions too.
Add/remove patches to/from ports to call iconv with non-const arguments.
This breaks some ports on FreeBSD 10 because base system iconv.h still has
the const qualifier. Fix this by letting USES=iconv add a build dependency
on converters/libiconv so ports can use its iconv.h (with LIBICONV_PLUG
defined) instead of the base system iconv.h.
This exposed some ports that link with libiconv when it is available instead
of using libc iconv. In these cases one of the following changes has been (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 22 Aug 2014
|
[ 17:36 tijl ]
Convert to USES=libtool and add INSTALL_TARGET=install-strip
|
|
Wed, 16 Apr 2014
|
[ 18:28 zeising ] (Only the first 10 of 1008 ports in this commit are shown above. )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 8 Oct 2013
|
[ 16:47 pawel ]
- Fix build on head with iconv in base
- Remove leading article from COMMENT
- Switch to new LIB_DEPENDS, OPTIONS
- Add support for STAGEDIR
|
|
Fri, 20 Sep 2013
|
[ 18:35 bapt ] (Only the first 10 of 1084 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)
|
|
Sat, 27 Apr 2013
|
[ 11:59 mva ] (Only the first 10 of 219 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here
Reviewed by: zeising
|
|
Tue, 23 Apr 2013
|
[ 10:47 bapt ] (Only the first 10 of 84 ports in this commit are shown above. )
Convert g* to USES=pkgconfig
|
|
Fri, 8 Mar 2013
|
[ 11:32 bapt ] (Only the first 10 of 209 ports in this commit are shown above. )
Convert USE_BISON to USES= bison
It brings bison as a build dependency in case it is set the following way:
USES= bison or USES= bison:build
it brings bison as a run dependency in case it is set the following way:
USES= bison:run
it brings bison both as a run and build dependency in case it the set the
following way:
USES= bison:both
While here trim some headers
Convert some USE_GNOME= gnomehack to USES= pathfix
|
|
Thu, 26 Jul 2012
|
[ 05:40 bapt ] (Only the first 10 of 158 ports in this commit are shown above. )
new devel/pkgconf added to replace devel/pkg-config. new version of pkg-config
are no more self hosting so we are stuck with 0.25 version while pkgconf provide
the same set of features as 0.27 and a compatible frontend. A symlink to
pkg-config has been added for convenience and compatibility
This also introduces a new macro to use pkgconf in your ports:
USE_PKGCONFIG
it can take the following arguments:
- yes (meaning build only dep)
- build (meaning build only dep)
- run (meaning run only dep)
- both (meaning run and build dep)
From now USE_GNOME= pkgconfig is deprecated in favour of USE_PKGCONFIG
The old gnome macro has been modified to use pkgconf but still the sameway: run
and build dep to avoid large breakage.
While here fix some ports relying on pkg-config but not specifying it, fix some
ports broken because testing wrong .pc files, and fix ports using pkg-config
--version to determine pkg-config version instead of
pkg-config --modversion pkg-config like recommanded by pkg-config
With Hat: portmgr
Exp-runs by: bapt (pointhat-west), beat (pointyhat)
|
|
Sun, 22 Jul 2012
|
[ 23:24 dougb ] (Only the first 10 of 29 ports in this commit are shown above. )
For the ports that are maintained by ports@ that have pkgconfig as their
only USE_GNOME feature, convert to a BUILD_DEPENDS. This avoids both the
bug of the bogus run depend introduced by bsd.gnome.mk, and also avoids
needlessly pulling that file in.
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Sat, 30 Jul 2011
|
[ 13:28 rene ]
- Fix build with clang [1]
- Pet portlint [1]
Rename new patch files to match the current port style and
http://www.freebsd.org/doc/en/books/porters-handbook/slow-patch.html
PR: ports/158077
Submitted by: Marcin Cieslak [saper saper.info]
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Sat, 18 Jul 2009
|
[ 11:11 dinoex ] (Only the first 10 of 337 ports in this commit are shown above. )
- update to jpeg7
Tested by: pav on pointyhat
|
|
Fri, 20 Mar 2009
|
[ 23:31 miwi ]
- Update to 1.8.4
PR: 132750
Submitted by: Ports Fury
|
|
Mon, 18 Aug 2008
|
[ 22:08 miwi ]
- Update to 1.8.3
PR: 126597
Submitted by: Ports Fury
|
|
Wed, 6 Aug 2008
|
[ 20:41 anholt ]
Drop maintainership on my ports as I'm no longer using FreeBSD.
|
|
Fri, 25 Jul 2008
|
[ 14:34 pav ] (Only the first 10 of 213 ports in this commit are shown above. )
- Remove USE_GCC where it can be satisfied with base compiler on following
FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT
|
|
Wed, 17 Oct 2007
|
[ 10:13 ade ] (Only the first 10 of 199 ports in this commit are shown above. )
Migration from bison 1.x to 2.x
PR: 117086
Tested by: -exp runs
|
|
Mon, 29 Jan 2007
|
[ 23:51 kris ] (Only the first 10 of 35 ports in this commit are shown above. )
Use libtool port instead of included version to avoid a.out objformat botch
|
|
Thu, 31 Aug 2006
|
[ 07:12 anholt ]
Update to 1.7.4.
PR: ports/101946
Submitted by: Stanislav Sedov <ssedov@mbsd.msk.ru>
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Sun, 23 Oct 2005
|
[ 20:59 anholt ]
Add missing dependency on freetype, which was always happily satisfied already
by my installed systems.
Reported by: pointyhat via kris
|
|
Thu, 20 Oct 2005
|
[ 08:49 anholt ]
BUILD_DEPEND on bison, which is required to successfully build (fallback to
byacc fails).
Reported by: pointyhat via kris
|
|
Mon, 17 Oct 2005
|
[ 08:47 anholt ]
New port: sswf, a tool to build Flash animation files from sourcecode, including
support for ActionScript.
|
Number of commits found: 38 |
As an Amazon Associate I earn from qualifying purchases.