21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

japanese: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  ABURAYER Rewsirow <pcs51674@asciinet.or.jp>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Akito FUJITA <fujita@zoo.ncl.omron.co.jp>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Daichi GOTO <daichi@FreeBSD.org>
  *  Daisuke Kawahara <kawahara@pine.kuee.kyoto-u.ac.jp>
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Eiji-usagi-MATSUmoto <usagi@ruby.club.or.jp>
  *  FUJISHIMA Satsuki <sf@FreeBSD.org>
  *  Fumihiko Kimura <jfkimura@yahoo.co.jp>
  *  HONDA Yasuhiro <honda@kashio.info.mie-u.ac.jp>
  *  Hajimu UMEMOTO <ume@FreeBSD.org>
  *  Hidekazu Kuroki <hidekazu@cs.titech.ac.jp>
  *  Hiroto Kagotani <hiroto.kagotani@gmail.com>
  *  Hyper NIKKI System Project <hnsmaster@h14m.org>
  *  IWASHITA Yoji <shuna@pop16.odn.ne.jp>
  *  Jacques Vidrine <nectar@FreeBSD.org>
  *  Jie Gao <gaoj@cpsc.ucalgary.ca>
  *  Jonathan Hanna
  *  Jun Mukai <mukai@jmuk.org>
  *  KANOU Hiroki <kanou@mil.allnet.ne.jp>
  *  KIRIYAMA Kazuhiko <kiri@kiri.toba-cmt.ac.jp>
  *  KOMATSU Shinichiro <koma2@jiro.c.u-tokyo.ac.jp>
  *  Ka Ho Ng <khng300@gmail.com>
  *  Kawaguti Ginga <ginga-freebsd@ginganet.org>
  *  Kawaguti Ginga <ginga@athena.club.ne.jp>
  *  Kazutoki TAKAMUNE <takamune@avrl.mei.co.jp>
  *  Kentaro Inagaki <JBD01226@niftyserve.ne.jp>
  *  Kimura Fuyuki <fuyuki@mj.0038.net>
  *  Kiriyama Kazuhiko <kiri@kiri.toba-cmt.ac.jp>
  *  Koichiro IWAO <meta+ports@vmeta.jp>
  *  Koichiro IWAO <meta@FreeBSD.org>
  *  MANTANI Nobutaka <nobutaka@FreeBSD.org>
  *  MANTANI Nobutaka <nobutaka@nobutaka.com>
  *  MIHIRA Yoshiro <sanpei@FreeBSD.org>
  *  MITA Yoshio <mita@FreeBSD.org>
  *  Makoto Matsushita <matusita@jp.FreeBSD.ORG>
  *  Makoto Matsushita <matusita@jp.freebsd.org>
  *  Masafumi NAKANE <max@FreeBSD.org>
  *  Masahiro Teramoto <markun@onohara.to>
  *  Masanori Kiriake <seiken@nbs.co.jp>
  *  Masashi CHIBA
  *  Mita Yoshio <mita@jp.FreeBSD.org>
  *  Motoyuki Kasahara <m-kasahr@sra.co.jp>
  *  Murata Shuuichirou <mrt@mickey.ai.kyutech.ac.jp>
  *  NIIMI Satoshi <sa2c@sa2c.net>
  *  Nobuhiro Yasutomi <nobu@psrc.isac.co.jp>
  *  Norikatsu Shigemura <nork@FreeBSD.org>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  SADA Kenji <sada@FreeBSD.org>
  *  SAITO Itsuro <saito@miv.t.u-tokyo.ac.jp>
  *  SASAKI Shunsuke <ele@pop17.odn.ne.jp>
  *  Sakai Hiroaki <sakai@miya.ee.kagu.sut.ac.jp>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Satoshi Taoka <taoka@FreeBSD.org>
  *  Seiichirou Hiraoka
  *  Seiya Yanagita <s_yanagita@ybb.ne.jp>
  *  Seth Kingsley <sethk@osd.bsdi.com>
  *  Shigeyuki FUKUSHIMA <shige@FreeBSD.org>
  *  Shigeyuki FUKUSHIMA <shige@kuis.kyoto-u.ac.jp>
  *  Shigeyuki Fukushima <shige@FreeBSD.org>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  TAKAHASHI Kaoru
  *  TAKAHASHI Kaoru <kaoru@kaisei.org>
  *  TAKANO, Yuji
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  TAKATSU Tomonari <tota@rtfm.jp>
  *  TANAKA Hiroyuki <kattyo@abk.nu>
  *  TAOKA Fumiyoshi <fmysh@iijmio-mail.jp>
  *  TOGAWA Satoshi <toga@puyo.org>
  *  Takashi Mega <mega@minz.org>
  *  Takayuki Nakao <t@nakao.org>
  *  Takefu
  *  The 244th namelessness at 2ch.net
  *  Timothy Beyer <beyert@cs.ucr.edu>
  *  Toshihiko SHIMOKAWA <toshi@tea.forus.or.jp> & ELISA Font Project
  *  Yoichi Asai <yatt@msc.biglobe.ne.jp>
  *  Yoichi NAKAYAMA <yoichi@eken.phys.nagoya-u.ac.jp>
  *  Yoshihiko Sarumaru <mistral@imasy.or.jp>
  *  Yoshiro MIHIRA <sanpei@jp.FreeBSD.org>
  *  Yoshiro MIHIRA <sanpei@sanpei.org>
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  Yukihiro Nakai <nakai@FreeBSD.org>
  *  Zhihao Yuan <lichray@gmail.com>
  *  asami
  *  gurkan@phys.ethz.ch
  *  hrs
  *  ichiro@ichiro.org
  *  issei
  *  kuriyama
  *  max
  *  mutoh@openedu.org
  *  n-shigemura@ensure.jp
  *  nivit@email.it
  *  nkazushi@highway.or.jp
  *  nork@FreeBSD.org
  *  sada
  *  shige
  *  sumikawa

With hat:	portmgr

    8d9b67b

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

06:28 rigoletto 

Mk/bsd.sites.mk: Update URL of MASTER_SITE_OSDN to one that supports
geographical load balancing

- update all affected ports

PR:		244164
Submitted by:	Yasuhiro KIMURA <yasu@utahime.org>
Differential Revision:	https://reviews.freebsd.org/D24955

 

21:12 sunpoet 

Rename MASTER_SITE_SOURCEFORGE_JP to MASTER_SITE_OSDN

PR:		225609
Submitted by:	Yasuhiro KIMURA <yasu@utahime.org>

 

14:08 mat 

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

 

15:03 tijl 

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same
Makefile.am and clean up the port Makefile.

japanese/scim-honoka: Tries to hide all symbols that start with an
underscore, but because this library is written in C++ all symbols start
with _Z so it ends up hiding everything.  Just don't hide anything at all
like the textproc/scim configure script does.

multimedia/schroedinger: Apply an upstream patch.

textproc/scim-input-pad: Same as japanese/scim-honoka.

PR:		201922
Approved by:	portmgr (antoine)
Exp-run by:	antoine

 

10:15 mat 

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

 

13:19 tijl 

textproc/scim:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

 

18:26 tijl 

- Convert to USES=libtool.
- New LIB_DEPENDS syntax.
- Staging.

 

18:47 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
japanese)

 

21:39 antoine 

Add an explicit dependency on pkgconf

Approved by:	portmgr (bapt)

 

11:59 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

 

19:26 tabthorpe 

- Reassign nork@ ports to the heap
- Thank you for your years of service, we hope to see you back

Approved by:	portmgr

18:42 swills 

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
  RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
  about for a while.

PR:             ports/168208
Approved by:    portmgr (miwi)

05:26 dinoex 

- update png to 1.5.10

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:34 ade 

Sync to new bsd.autotools.mk

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

20:56 hrs 

Update dependency.

13:37 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

15:04 nork 

Fix typo: USE_X_LIB --> USE_XLIB

Reported by:    infofarmer

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

16:22 nork 

o Bump PORTREVISION by updating scim. [1]
o Remove old and unusable support codes.

Spotted by:     ume [1]

04:31 ume 

Fix plist after upgrading scim to 1.4.5.
scim-1.4.5 appended its version to the moduledir in scim.pc.

Approved by:    nork

06:05 kris 

Use libtool15 port instead of included version to avoid objformat a.out botch

08:54 marcus 

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

20:07 nork 

Update to 1.0.0.

Submitted by:   TAKANO Yuji <takachan@running-dog.net>

01:22 nork 

Fix build error.

PR:             ports/91014
Reported by:    Byung-Hee HWANG <bh@izb.knu.ac.kr>
Obtained from:  japanese/scim-anthy

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

05:22 marcus 

Bump PORTREVISION to chase the glib20 shared library update.

13:21 nork 

SCIM updated to 1.4.2.
o Update scim 1.4.2. [1]
o Update skim 1.4.2. [1]
o Update scim-uim 0.1.4. [2]
o Bump PORTREVISION in scim related ports.

Approved by:    Jie Gao <gaoj@cpsc.ucalgary.ca> [1]
Approved by:    Seiya Yanagita <s_yanagita@ybb.ne.jp> [2]

16:53 nork 

Update to 0.1.3.

Pointed out by: ume

09:29 nork 

Update to 0.1.1.

Pointed out by: ume

06:20 nork 

o Update to 1.4.0.
o Chase bump libversion to slave ports .

PR:             ports/84247
Submitted by:   Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

10:16 nork 

Update to 0.1.0.

14:57 nork 

o Update
  ports/textproc/scim 1.2.0 --> 1.2.2
  ports/textproc/skim 1.2.0 --> 1.2.2
o Chase scim's library bump.

PR:             ports/80848
Submitted by:   Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

13:30 nork 

Add scim-canna 0.0.0, is the SCIM IMEngine module using the Canna
input method.

Obtained from:          japanese/scim-anthy port
I was cheated by:       ume