| non port: japanese/scim-honoka/Makefile |
|
SVNWeb
|
Number of commits found: 30 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 8d9b67b (Only the first 10 of 220 ports in this commit are shown above. )
japanese: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* ABURAYER Rewsirow <pcs51674@asciinet.or.jp>
* Aaron Dalton <aaron@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Akito FUJITA <fujita@zoo.ncl.omron.co.jp>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Daichi GOTO <daichi@FreeBSD.org>
* Daisuke Kawahara <kawahara@pine.kuee.kyoto-u.ac.jp>
* David O'Brien (obrien@cs.ucdavis.edu)
* Eiji-usagi-MATSUmoto <usagi@ruby.club.or.jp>
* FUJISHIMA Satsuki <sf@FreeBSD.org>
* Fumihiko Kimura <jfkimura@yahoo.co.jp> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 8 Dec 2016
|
[ 19:23 tijl ]   (Only the first 10 of 122 ports in this commit are shown above. )
Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
|
Fri, 1 Apr 2016
|
[ 14:08 mat ] (Only the first 10 of 481 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 2 Aug 2015
|
[ 15:03 tijl ] (Only the first 10 of 234 ports in this commit are shown above. )
By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do. On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).
Bump PORTREVISION on all ports where the build log contains -export-symbols.
audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions. Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to. Fix a number of other issues in the same (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 31 Aug 2014
|
[ 13:19 tijl ] (Only the first 10 of 22 ports in this commit are shown above. )
textproc/scim:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
|
|
Thu, 24 Apr 2014
|
[ 18:31 tijl ]
- Convert to USES=libtool.
- Remove references to PTHREAD_CFLAGS and PTHREAD_LIBS.
- Staging.
- Fix build with clang.
|
|
Fri, 20 Sep 2013
|
[ 18:47 bapt ] (Only the first 10 of 352 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
japanese)
|
|
Tue, 3 Sep 2013
|
[ 10:23 bapt ] (Only the first 10 of 29 ports in this commit are shown above. )
Add an explicit dependency on pkgconf
|
|
Wed, 19 Jun 2013
|
[ 14:51 miwi ]
- Don't remove directories not created by this port
Reported by: pkg (DEVELOPER_MODE)
|
|
Sat, 27 Apr 2013
|
[ 11:59 mva ] (Only the first 10 of 219 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here
Reviewed by: zeising
|
|
Wed, 24 Apr 2013
|
[ 18:10 ak ] (Only the first 10 of 1028 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 3)
Approved by: portmgr (bapt)
|
|
Sun, 29 Jul 2012
|
[ 11:17 cs ] (Only the first 10 of 181 ports in this commit are shown above. )
Fix typos in COMMENT
Approved by: portmgr@ (implicit)
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Mon, 31 May 2010
|
[ 02:01 ade ] (Only the first 10 of 1416 ports in this commit are shown above. )
Bounce PORTREVISION for gettext-related ports. Have fun, ya'll.
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Mon, 5 Jan 2009
|
[ 20:36 pav ] (Only the first 10 of 102 ports in this commit are shown above. )
- Remove conditional checks for FreeBSD 5.x and older
|
|
Fri, 6 Jun 2008
|
[ 13:37 edwin ] (Only the first 10 of 73 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sun, 23 Mar 2008
|
[ 16:44 miwi ] (Only the first 10 of 104 ports in this commit are shown above. )
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION
Approved by: portmgr (xorg cleanup)
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Sun, 1 Apr 2007
|
[ 08:53 ume ]
Fix plist after upgrading scim to 1.4.5.
scim-1.4.5 appended its version to the moduledir in scim.pc.
Approved by: Masashi CHIBA <chiba.masashi__at__gmail.com> (maintainer)
|
|
Sat, 14 Oct 2006
|
[ 08:54 marcus ] (Only the first 10 of 893 ports in this commit are shown above. )
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.
Submitted by: mezz, ahze, pav, and many others
Approved by: portmgr (implicit, kris)
|
|
Sat, 7 Oct 2006
|
[ 09:21 miwi ]
- Update to 0.9.1
PR: ports/104038
Submitted by: Masashi CHIBA <chiba.masashi@gmail.com> (maintainer)
|
|
Tue, 3 Oct 2006
|
[ 23:41 alepulver ]
Honoka is the SCIM IMEngine module using various input method engines: Wnn,
anthy,prime,skk and canna. Honoka can also use them simultaneously.
WWW: http://nop.net-p.org/modules/pukiwiki/index.php?%5B%5Bhonoka%5D%5D
(in Japanese)
This port is honoka "core" library. You must be install honoka "input method"
and "input" plugin.
Smart Common Input Method platform, in short SCIM, is a development platform to
make Input Method developers live easier.
WWW: http://scim.freedesktop.org
PR: ports/98583
Submitted by: Masashi CHIBA
|
Number of commits found: 30 |
As an Amazon Associate I earn from qualifying purchases.