| non port: japanese/scim-tables/Makefile |
|
SVNWeb
|
Number of commits found: 37 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 8d9b67b (Only the first 10 of 220 ports in this commit are shown above. )
japanese: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* ABURAYER Rewsirow <pcs51674@asciinet.or.jp>
* Aaron Dalton <aaron@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Akito FUJITA <fujita@zoo.ncl.omron.co.jp>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Daichi GOTO <daichi@FreeBSD.org>
* Daisuke Kawahara <kawahara@pine.kuee.kyoto-u.ac.jp>
* David O'Brien (obrien@cs.ucdavis.edu)
* Eiji-usagi-MATSUmoto <usagi@ruby.club.or.jp>
* FUJISHIMA Satsuki <sf@FreeBSD.org>
* Fumihiko Kimura <jfkimura@yahoo.co.jp> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 1 Apr 2016
|
[ 14:08 mat ]   (Only the first 10 of 481 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.
With hat: portmgr
Sponsored by: Absolight
|
|
Sat, 5 Jul 2014
|
[ 21:29 marino ]
japanese/scim-tables: stage and define scim as BUILD_DEPENDS (dports)
|
|
Wed, 2 Jul 2014
|
[ 19:21 antoine ] (Only the first 10 of 27 ports in this commit are shown above. )
Resetting maintainership on ports that have not been staged and without any
pending PR
With hat: portmgr
|
|
Mon, 26 May 2014
|
[ 12:33 miwi ] (Only the first 10 of 12 ports in this commit are shown above. )
- Convert gmake,bzip2 to USES
Approved by: portmgr
|
|
Fri, 20 Sep 2013
|
[ 18:47 bapt ] (Only the first 10 of 352 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
japanese)
|
|
Tue, 23 Apr 2013
|
[ 11:46 bapt ] (Only the first 10 of 11 ports in this commit are shown above. )
Convert j* categories to USES=pkgconfig
|
|
Sun, 24 Mar 2013
|
[ 15:51 bdrewery ]
- Add explicit pkgconf dependency
- Trim headers
PR: ports/177306
Reported by: John Marino <draco@marino.st>
With hat: portmgr
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Wed, 20 Jul 2011
|
[ 22:09 lx ] (Only the first 10 of 23 ports in this commit are shown above. )
Update scim-tables ports to 0.5.10. Appease portlint.
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sat, 22 Aug 2009
|
[ 00:24 amdmi3 ] (Only the first 10 of 130 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with H,I,J,K,L
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Fri, 6 Jun 2008
|
[ 13:37 edwin ] (Only the first 10 of 73 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Sun, 29 Apr 2007
|
[ 02:22 lx ]
Remove 4.x cruft.
Approved by: edwin (mentor)
|
|
Sun, 3 Dec 2006
|
[ 08:11 lx ]
- Update to 0.5.7
- Honor PREFIX
Approved by: edwin (mentor)
|
|
Sat, 14 Oct 2006
|
[ 08:54 marcus ] (Only the first 10 of 893 ports in this commit are shown above. )
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.
Submitted by: mezz, ahze, pav, and many others
Approved by: portmgr (implicit, kris)
|
|
Thu, 25 May 2006
|
[ 21:57 pav ]
- Adopt
PR: ports/97860
Submitted by: David Thiel <lx@redundancy.redundancy.org>
|
|
Sat, 5 Nov 2005
|
[ 05:22 marcus ] (Only the first 10 of 1045 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared library update.
|
|
Thu, 3 Nov 2005
|
[ 07:58 nork ] (Only the first 10 of 11 ports in this commit are shown above. )
Update to 0.5.4.
o Add expremental T-Code/TUT-Code support. [1]
Mentored by: Makoto Fujiwara <makoto@ki.nu> (T-Code meister) [1]
WWW: http://www.ki.nu/~makoto/tcode/ [1]
|
|
Sat, 15 Oct 2005
|
[ 13:21 nork ] (Only the first 10 of 18 ports in this commit are shown above. )
SCIM updated to 1.4.2.
o Update scim 1.4.2. [1]
o Update skim 1.4.2. [1]
o Update scim-uim 0.1.4. [2]
o Bump PORTREVISION in scim related ports.
Approved by: Jie Gao <gaoj@cpsc.ucalgary.ca> [1]
Approved by: Seiya Yanagita <s_yanagita@ybb.ne.jp> [2]
|
|
Tue, 4 Oct 2005
|
[ 15:10 linimon ]
Canonicalize name of null maintainer.
|
|
Sat, 30 Jul 2005
|
[ 06:20 nork ] (Only the first 10 of 14 ports in this commit are shown above. )
o Update to 1.4.0.
o Chase bump libversion to slave ports .
PR: ports/84247
Submitted by: Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)
|
|
Tue, 10 May 2005
|
[ 14:57 nork ] (Only the first 10 of 16 ports in this commit are shown above. )
o Update
ports/textproc/scim 1.2.0 --> 1.2.2
ports/textproc/skim 1.2.0 --> 1.2.2
o Chase scim's library bump.
PR: ports/80848
Submitted by: Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)
|
|
Sat, 12 Mar 2005
|
[ 10:54 marcus ] (Only the first 10 of 911 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared lib version change.
|
|
Mon, 7 Mar 2005
|
[ 08:28 clsung ]
- update to 0.5.1, use scim-table-imengine now
PR: 78266
Submitted by: Jie Gao (maintainer)
|
|
Thu, 20 Jan 2005
|
[ 15:25 vanilla ]
Remove dead master site and update WWW.
PR: ports/76476
Submitted by: maintainer
|
|
Sun, 7 Nov 2004
|
[ 22:37 marcus ] (Only the first 10 of 631 ports in this commit are shown above. )
Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.
|
|
Mon, 18 Oct 2004
|
[ 21:35 thierry ] (Only the first 10 of 20 ports in this commit are shown above. )
Upgrade textproc/scim and related ports:
textproc/scim 0.99.6 --> 1.0.0
chinese/scim-chinese 0.4.1 --> 0.4.2
chinese/scim-tables 0.4.1 --> 0.4.3
korean/scim-tables 0.4.1 --> 0.4.3
japanese/scim-tables 0.4.1 --> 0.4.3
textproc/skim 0.9.5 --> 1.0.0
Pet portlint.
PR: ports/71919
Submitted by: maintainer.
|
|
Sun, 22 Aug 2004
|
[ 12:33 arved ] (Only the first 10 of 13 ports in this commit are shown above. )
Add a forgotten PLIST_SUB in last update to textproc/scim to support 4-STABLE.
Update textproc/scim to 0.99.6
Update dependants:
textproc/skim 0.9.4 --> 0.9.5
chinese/scim-chinese 0.4.0 --> 0.4.1
chinese/scim-tables 0.4.0 --> 0.4.1
korean/scim-tables 0.4.0 --> 0.4.1
japanese/scim-tables 0.4.0 --> 0.4.1
PR: 70501
Submitted by: Jie Gao <gaoj@cpsc.ucalgary.ca>
|
|
Thu, 12 Aug 2004
|
[ 07:14 vanilla ]
1: Make scim buildable on 4-X.
2: Add sf.net to MASTER_SITE.
3: make other ports BROKEN on 4-X.
PR: ports/70326
Submitted by: maintainer
|
|
Fri, 2 Jul 2004
|
[ 22:39 vanilla ]
Add scim-tables 0.4.0, SCIM table based Japanese input methods.
PR: ports/67133
Submitted by: Jie Gao <gaoj@cpsc.ucalgary.ca>
Somepart by: me
|
Number of commits found: 37 |
As an Amazon Associate I earn from qualifying purchases.