00:28 adamw 

Remove NOPORTDOCS and NOPORTEXAMPLES from unstaged ports. Stage a couple while
we're here. Remove any other references to NOPORT*.

Approved by:	portmgr (blanket for modernization)

 

20:39 antoine 

Deprecate ports failing to build with new utmpx
Maintainers had more than 4 years to fix them

With hat:	portmgr

 

14:50 tijl 

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

12:53 miwi 

- Convert gmake to USES

Approved by:	portmgr

 

19:49 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
korean)

 

11:56 az 

- Convert to new perl framework
- Trim Makefile header

 

07:33 az 

- switch simple inline replacement from perl to sed
  and remove where is no need in this anymore.
- trim Makefile header

Approved by:	bapt@ (portmrg@)

 

11:34 kwm 

Remove BROKEN now that imlib is fixed.

21:10 pav 

- Mark BROKEN: does not compile
  undefined reference to `PrintGifError'

Reported by:    pointyhat

05:26 dinoex 

- update png to 1.5.10

07:34 ade 

Sync to new bsd.autotools.mk

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

15:23 miwi 

- Mark BROKEN on HEAD: fails to build with new utmpx

Reported by:    pointyhat

11:46 dinoex 

- update to jpeg-8

22:53 pav 

- Mark MAKE_JOBS_UNSAFE

Reported by:    pointyhat

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

20:08 itetcu 

- s/PREFIX/LOCALBASE/ in DEPENDS
- install docs in default DOCSDIR and fix plist for -DNOPORTDOCS
- bump PORTREVISION

Prompted by:    QA Tindy run

13:39 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

06:05 kris 

Use libtool15 port instead of included version to avoid objformat a.out botch

10:25 pav 

- Remove support for a.out format and PORTOBJFORMAT variable from individual
  ports

With hat:       portmgr

05:34 linimon 

Reset hollywar@mail.holywar.net due to no response to email about maintainer
timeouts.

Hat:    portmgr

08:28 ade 

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

05:19 sf 

farewell to libxpg4.

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

15:06 trevor 

Define USE_PERL5_BUILD, not erroneous USE_PERL.

Submitted by:   Oliver Eikemeier

13:51 trevor 

Define USE_PERL to make Perl available for (mostly deprecated)
"perl -pi -e" construction.

13:56 krion 

- Fix MASTER_SITES

PR:             57440
Submitted by:   Mark Linimon <linimon@lonesome.com>

10:15 cjh 

Fix distfiles/www locations and one maintainer.

04:10 marcus 

Convert to new GNOME infrastructure.

12:31 knu 

De-pkg-comment.

03:12 kris 

Remove #include <malloc.h>
Set GNU_CONFIGURE since this port uses it
Don't use an internal libtool, use the system one.  Port build is still
broken on -current because of expr(1) abuse in the libtool port.

07:57 reg 

Implement WANT_IMLIB and USE_IMLIB.