19:43 skv 

Rename: lang/perl5 -> lang/perl5.6

PR:             ports/131046

20:36 pav 

- Remove conditional checks for FreeBSD 5.x and older

16:23 skv 

- Take maintainership [1]
- Add CONFLICTS
- Use "pre-su-install" (for rootless builds)

Approved by:    tobez (previous maintainer)

14:30 araujo 

- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)

01:00 linimon 

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr

11:41 gabor 

- Remove the DESTDIR modifications from individual ports as we have a new,
  fully chrooted DESTDIR, which does not need such any more.

Sponsored by:   Google Summer of Code 2007
Approved by:    portmgr (pav)

12:34 erwin 

Add support for DESTDIR part I.

This commit should largele be a NOOP as it only adds support
for DESTDIR undefined. This does allow us to start testing
ports with DESTDIR set, but this is as of yet not supported.

Although this has been extensively tested on pointyhat, this
is a very intrusive change and some cases may have been
overlooked. Please contact Gabor and me if you find any.

PR:             100555
Submitted by:   gabor
Sponsored by:   Google Summer of Code 2006

15:38 fenner 

Don't use "." in MASTER_SITE_SUBDIR; it only applies to URLs with
 %SUBDIR% in them, and the site that needed the "." doesn't.

Approved by:    Anton Berezin <tobez@tobez.org> (MAINTAINER)

10:45 tobez 

Fix LATEST_LINK issues.

Nudged by:      krion

10:17 tobez 

If one of locale-related variables set to a bad value in the user's
environment (like da_DK.ISO_8859-15 as opposed to da_DK.ISO8859-15 on
-CURRENT), perl ports cannot be built.  While this condition clearly is
an operator error, it is still no excuse for the build failure.

Fix that by cleaning locale-related variables for configure and build
steps.  No plist changes, no portrevision bump.

Reported by:    Flemming Jacobsen <fj quite-at batmule maybe-dot dk>

09:34 tobez 

Update bsd.port.mk's notion of the perl version (to 5.8.6) [1].
Use more correct OSVERSION threshold to distinguish between
base system perl and perl from ports - the right value is 500036 [1].

Also, simplify OSVERSION-related logic in lang/perl5 and lang/perl5.8.
Now it goes as follows:

- for lang/perl5.8, if there is perl in the base system, install
  use.perl script, use a helpful pkg-message, and do not automatically
  update symlinks;
- for lang/perl5.8, if there is no perl in the base system, do not
  install use.perl script, and update symlinks automatically;
- for lang/perl5, always install use.perl;
- for lang/perl5, never update symlinks automatically;
- for lang/perl5, vary produced pkg-message depending on the presence of
  the base system perl.

Bump PORTREVISION for both lang/perl5 and lang/perl5.8.

[1] Approved by:        portmgr

20:58 tobez 

The separation of p5 ports' manual pages and perl's own manual pages was
done incorrectly.  Fix that.

13:36 tobez 

Update to 5.6.2.  Also:

- redirect output from h2ph to /dev/null [1];
- fix File::Path insecure file/directory permissions [2];
  this resolves CAN-2004-0452
  (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html);
- for OSVERSION < 500036, create symlinks in /usr/bin not only for
  perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs,
  perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man,
  pod2text, s2p, and splain;  perl and suidperl are still enough for
  more recent FreeBSD versions [3];
- clean up created symlinks upon deinstallation [4];
- try to cleanup symlinks created by older versions of lang/perl5 and
  lang/perl5.8, during both installation and deinstallation [5];
- added support for DISABLE_BSDPAN environment variable [6];
- be explicit about use.perl usage after installation of 4.X systems,
  and on systems where lang/perl5.8 is prefered to lang/perl5; the exact
  range is OSVERSION < 500036 || OSVERSION >= 502100 [7];
- respect __MAKE_CONF partially (the build-time value is used) [8];
- use.perl is now the same as pkg-install is now the same as
  pkg-deinstall;  apart from the changes already mentioned above, this
  is a shell script now;
- use.perl's logic is also simplified in several ways [9];
- fix a BSDPAN bug [10];
- create and remove %%SITE_PERL%%/%%PERL_ARCH%%/auto, just
  like  lang/perl5.8 does, to silent pointyhat [11];
- apply a patch to handle daylight saving time correctly in
  POSIX::strftime [12];
- the port now creates and uses shared libperl.so, as lang/perl5.8 port
  does;
- move MAN3 manual pages under ${PREFIX}/lib/perl5/${PERL_VER}/perl, as
  to avoid conflict with some of the p5 ports;
- do not build suidperl by default any longer;  one should use
  ENABLE_SUIDPERL to do that;
- move out manpage list to a separate Makefile.man;
- in general, the port layout is made much more similar to lang/perl5.8,
  including.

Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR
70831), PR 64963 (partially), and anything else that I forgot.

[1] Nudged by: krion
[2] Reported by: nectar
    Patch from: Chris Turner @ RedHat
[3] PR: 55760, 57151, 58406
[4] Requested by: kris
    PR: 54262
[5] PR: 51281, 51539
[6] PR: 57134
[7] PR: 60736
[8] PR: 74431
[9] Perl version submitted by des, implemented in sh
[10] Reported by: Alexander Nagilum <freebsd %at% nagilum de>
[11] PR: 71390
[12] PR: 74042, perl bug 18238

15:38 obrien 

Fix the perl builds.

08:54 obrien 

Fix "pkg_add -r perl" for 5.2-CURRENT (and later).  This will now install
perl 5.8 for 5.2-CURRENT.

Approved by:    perl

06:11 marcus 

Use the correct pkg-message on recent versions of -CURRENT.

Reported by:    bento via kris

19:21 marcus 

Don't run use.perl port by default on recent versions of -CURRENT.

06:14 marcus 

Build the DynaLoader with -fPIC to fix some build problems on amd64.

Submitted by:   tobez
Approved by:    portmgr (implicit)

08:33 tobez 

Add a patch to properly escape generated action attribute in
CGI::start_form.  The escape code is taken from CGI.pm v.3.00.

PR:             57391
Reported by:    IIJIMA Hiromitsu <delmonta@ht.sakura.ne.jp>

09:37 osa 

Make portlint(1) happy by changing strip to ${STRIP_CMD}

Submitted by:   Oleg Karachevtsev <ok@etrust.ru>
PR:             56998

10:53 sobomax 

Respect global CC settings.

Approved by:    maintainer

13:19 tobez 

Under certain conditions, perl's configure script could pick a directory
other than ${LOCALBASE}/bin to install its scripts (h2ph, perldoc, and
friends) to.  Fix that.

PR:             51350
Reported by:    Oliver Brandmueller <ob@gruft.de>

14:27 tobez 

Patch Safe.pm (see
http://use.perl.org/articles/02/10/06/1118222.shtml?tid=5).

Reported by:    kuriyama

06:05 ade 

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

08:26 ijliao 

chase gdbm lib version

16:50 bmah 

On recent 5-CURRENT, there is no Perl wrapper.  It is therefore possible
that /usr/bin/perl5 doesn't exist, which violates some of use.perl's
assumptions.  Take care of this case. [1]

Also in the case of a recent 5-CURRENT, automatically perform
"use.perl port" during package/port installation.  This helps the
installation of sysinstall's new "Perl distribution", in that
sysinstall doesn't need to do this explicitly as Yet Another Special
Case. [2]

PORTREVISION bump after all this good stuff.

Requested by:   bmah [1], jhb [2]
Submitted by:   tobez (port MAINTAINER)
Approved by:    portmgr (kris)

14:43 tobez 

Make perl's configure be aware of gcc command line syntax change from
-Acpu(i386) to -Acpu=i386 and similar.

The patch is from Perlland:
http://archive.develooper.com/perl5-porters@perl.org/msg79350.html

While at it, add $ FreeBSD $ to the rest of the patches.

Reported by:    kuriyama

15:47 tobez 

Fix a bug in perl 5.6.1 described in

http://archive.develooper.com/perl5-porters@perl.org/msg58812.html

with a patch from

http://archive.develooper.com/perl5-porters@perl.org/msg58819.html

While we normally do not fix non-FreeBSD problems with 3rd party
software, it is expected that perl 5.6.1 will be used widely for some
time to come, and the bug is bad enough to grant the inclusion of the
patch here.

13:32 sobomax 

Due to popular demant into each port which might be inserted into dependency
list by bsd.port.mk insert anti foot-shooting device, which prevents
infinite fork loop when the user defines corresponding USE_XXX in global
make.conf, command line or environment.

Similar devices should probably be inserted into ports that might be inserted
into dependency list by others bsd.foo.mk files (bsd.ruby.mk, bsd.python.mk
and so on.)

08:25 tobez 

Add two knobs:

WITH_PERL_MALLOC - to compile with perl's own malloc, as opposed to the
freebsd system malloc.  Some might find this useful, since perl's malloc
is marginally faster in typical cases, and orders of magnitude faster in
degenerate cases.  Use with care.

WITH_GDBM - to compile with gdbm support.

Requested by:   netchild (WITH_PERL_MALLOC),
                Joachim Leidinger <jojo@blackpoint.de> (WITH_GDBM)

16:06 tobez 

1. Merge from src/contrib/perl5/lib/ExtUtils/Attic/Install.pm rev. 1.2:

          Force installs. This is to allow (semi-)automatic garbage removal by
      "find /usr/libdata -ctime -N -delete".

Well - substitute /usr/libdata with /usr/local/lib/perl5 here.

Requested by:   sheldonh

2. Do not link with libbind even if Configure detects it.  A particular
reason for that is that perl's getpw* stop working with NIS.

Reported by:    Russell Cattelan <cattelan@thebarn.com>

12:28 tobez 

1. Do not do rm -rf as a mean to deinstall this port.  Instead, apart
   from normal rmdir'ing and unexec rmdir'ing, do a find | xargs rm for
   generated .ph files, since those will differ in different versions of
   FreeBSD just like .h files may not be the same.

2. Install.pm is broken in 5.6.1 and leads to the wrong .packlist
   generation, which, in turn, breaks BSDPAN.  Fix that.

3. Extend use.perl to patch /etc/manpath.config so that manpages for
   modules installed by this and other p5- ports are be available.

PR:             39108 (item 1)
Reported by:    Dan Nelson <dan@dan.emsphone.com> (item 1)

11:26 dougb 

Bump PORTREVISION to take the new version of use.perl into account.

Requested by: tobez

21:22 tobez 

Put SITEARCH and SITELIB paths in front of ARCHLIB and PRIVLIB in the
@INC array. This takes care of the infamous problem of updating the
packages already in the perl distribution. With this change, no tricks
are any longer necessary for such p5 ports, except the usual tweaking of
INSTALLDIRS in Makefile.PL. This last one can also be taken care of by
an appropriate BSDPAN modifications, but until we have the `natural'
@INC order in the 4.X base system perl, it is meaningless.

Do not include iconv.h and do not link with libiconv. Iconv is not used
by perl in any way currently, but it used to link it if found.

Fix perl on freebsd/sparc64.

PR:             33212 (iconv), 37605 (iconv), 38813 (sparc64)
Reported by:    Vivek Khera <khera@kciLink.com> (iconv),
                Martin Nilsson <martin@gneto.com> (iconv)
Submitted by:   jake (sparc64)

10:39 tobez 

Use a cleaner, documented way to obtain the path of BSDPAN.  This fixes
the problems with threaded perl build.  The threaded perl is curently
unsupported by this port but seems to work fine with this fix applied.

Reported by:    Jens Fallesen <jens@fallesen.dk>

00:03 tobez 

1. Speed up the fetch stage by using groups of MASTER_SITES.
2. Remove the dependency on perl (rather important for this port).
3. Make the script this port installs use the version of perl from ports.

Reported-by:    (item 2) Juriy Goloveshkin <j@gu.ru>, Mark Huizer
<xaa@timewasters.nl>

17:05 tobez 

Unforbid the port for the use of general FreeBSD public.    

14:51 tobez 

Make this port do the same thing whether databases/gdbm is installed or   not -
do not install GDBM_File extension.    

20:36 tobez 

Take over maintainership.    

20:57 markm 

Update for Perl 5.6.1.    

15:17 markm 

Upgrade this to perl5.6.0 for _knowledgeable_  folks in STABLE who   really want
it.    

15:04 olgeni 

Some style fixes in the lang category (usual round of spaces -> tabs)