Number of commits found: 109 (showing only 100 on this page)

1 | 2  »  

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Mark as broken on powerpc64.

While here, adjust other BROKEN lines to pacify portlint.

Approved by:	portmgr (tier-2 blanket)

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Update `databases/gdbm' to version 1.18.1, an important bugfix release
which restores compatibility with old databases (version 1.8) and some
later versions which were built without mmap(2) support.  Due to shlib
version change, bump port revisions of the consumer ports.

PR:		233059
Exp-run by:	antoine
Approved by:	maintainer (johans, numerous timeouts)

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

lang/smalltalk: remove TK option

Revert 452511, I missed some ports

I missed some ports that depend on lang/tcl84 or x11-toolkits/tk84 by
explicitly mentioning the port origin instead of using USES.

lang/tcl84, x11-toolkits/tk84: remove expired ports

Fix supported versions in USES=t[cl|k], remove last consumer (lang/fpc-tcl) and
bump PORTREVISION on two other ports that have had their dependencies or
default options changed (lang/smalltalk and x11-toolkits/ocaml-labltk)

Remove USES=execinfo.

PR:		220271
Submitted by:	mat (review), Yasuhiro KIMURA (PR)
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D11488

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

fix ports using xargs directly.

Sponsored by:	Absolight

Use USES=pathfix where applicable.

PR:		213195
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D8093

Mark broken on aarch64: fails to link.

Approved by:	portmgr (tier-2 blanket)

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

Convert categories m* and m* to USES=sqlite and USES=firebird

Use modern USES features (execinfo, localbase); no functional changes

PR:		205347
Submitted by:	pawel

- Fix installed manpage symlink to not point inside stagedir
- Add missing plist entries: .pc file and empty directory (the latter is created
in post-install, is it really needed?)
- Unsilence install command

PR:		202794
Submitted by:	amdmi3
Approved by:	maintainer timeout (johans, 2 weeks)

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same

(Only the first 15 lines of the commit message are shown above )

- Display a stage-qa warning when ports use PREFIX/var instead of /var
- Add --localstatedir=/var to _LATE_CONFIGURE_ARGS (like --mandir) but not
  when CONFIGURE_ARGS already sets it.  (GNU configure scripts set it to
  PREFIX/var when PREFIX != /usr.)
- Add --localstatedir="${PREFIX}/var" to CONFIGURE_ARGS in some ports so
  they aren't affected by this change (for now at least).  This commit is
  meant to ensure that new ports don't make the same mistake.

- games/acm: the configure script in this port is very old; instead of
  patching it more, just replace GNU_CONFIGURE with HAS_CONFIGURE.
- irc/charybdis: it already used /var but adding --localstatedir=/var
  changed the behaviour of the configure script; adjust the port to this.

PR:		199506
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

(Only the first 15 lines of the commit message are shown above )

Switch to USES=pgsql

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Bump PORTREVISION on all ports with USE_SQLITE=yes or USE_SQLITE=3 that
have not been bumped yet after the latest libsqlite3.so library version
change.

Approved by:	portmgr (implicit)

Allow to build with texinfo from ports

With hat:	portmgr

audio/sdl_sound:
- USES=libtool.
- Strip library.
- Replace patch+reinplace with a single reinplace.
- Remove a patch so we use the upstream library name again.  Bump
  PORTREVISION on all dependent ports.

games/alephone:
- USES=gmake tar:bzip2.
- Remove unneeded PKG_CONFIG variable.
- Staging.
- New LIB_DEPENDS syntax.

games/asc:
- USES=libtool.

(Only the first 15 lines of the commit message are shown above )

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

(Only the first 15 lines of the commit message are shown above )

Remove some references to deprecated NOPORTDATA

With hat:	portmgr

- Enable STAGE support
- Simplify OPTIONS handling
- Correct shebang paths
- Strip installed binaries and libraries
- Bump PORTREVISION

Add NO_STAGE all over the place in preparation for the staging support (cat:
lang)

Update Smalltalk to 3.2.5 (mostly bugfixes)
http://smalltalk.gnu.org/news/gnu-smalltalk-3-2-5

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.

Bump all ports that directly depend on libglut because of the shlib version
change.

There are some extra items in this patch.

*) Because freeglut doesn't have the same dependancies as libglut, some ports
	need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
	with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
	remains now.
*) While here fix a png related build issue games/vegastrike.

Thanks to miwi for running the exp-run.

Approved by:	portmgr (miwi)

Collaboration with:	zeising@
Obtained from:	xorg-dev staging area.

Convert to new options framework

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Track dependencies after databases/gdbm update

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

Update GNU Smalltalk to 3.2.4

- Update smalltalk to 3.2.3
- Remove patch that has been included upstream

Sync to new bsd.autotools.mk

- Update graphics/sdl_ttf to version 2.0.10
- Bump portrevisions for all ports depending on graphics/sdl_ttf
- Update Mk/bsd.sdl.mk for the new shared library version.

Update to 3.2.2 (bugfix release)

Update to 3.2.1

Set IGNORE for NOPORTDATA configurations:
Smalltalk port does not honour the NOPORTDATA flag
and won't work if the port data is not installed

Reported by:    QAT

- Update to Smalltalk 3.2,
  http://smalltalk.gnu.org/news/gnu-smalltalk-3-2

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

Update my mail address to @FreeBSD.org

Feature safe:   yes

- update to jpeg-8

- Update devel/sdl12 to version 1.2.14.
- Update audio/sdl_mixer to version 1.2.11.
- Update graphics/sdl_gfx to version 2.0.20.
- Update graphics/sdl_image to version 1.2.10.
- Bump portrevisions for all ports depending on audio/sdl_mixer and
  graphics/sdl_image.
- Update Mk/bsd.sdl.mk accordingly for the new shared lib versions.

PR:             ports/142147 ports/142248 ports/142249
Approved by:    miwi (mentor implicit)

- Mark broken on FreeBSD 6.x

Reported by:    pointyhat via pav, erwin

Update to 3.1

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Mark as broken on sparc64: fails to install.

- Remove conditional checks for FreeBSD 5.x and older

Update to 3.0.5

Update to 3.0.4

- Remove USE_GCC where it can be satisfied with base compiler on following
  FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Fix plist

Reported by:    miwi

Update to 3.0.3

- Update to 3.0.2 - See smalltalk.gnu.org for what's new in 3.0
- Optional postgresql bindings
- Update website link and remove references to old maintainers

- Update to 2.3.6

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 2.3.5
- This version should work better on ia64 platforms

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 2.3.3
- Claim maintainership
- Fix build for amd64 (and maybe ia64)
- Remove FreeBSD 4.x specific libreadline requirement
- Mark broken for 5.x: lacking certain libm functions

 - Fix after objformat removal

Submitted by:   pointyhat

- Fix build with gcc 4.1

- Update to 2.3.1

PR:             106983
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include irc/ japanese/ java/ lang/ mail/ math/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

- Add readline as dependency when it was already installed. The program
  will be linked against it anyway, not against a system one.
- Fix BROKEN message to pet portlint(1)
- Use DATADIR

PR:             ports/101446
Submitted by:   Stanislav Sedov <ssedov at mbsd.msk.ru>

Remove USE_REINPLACE from the categories starting with L

Update to 2.2.

PR:             ports/90554
Submitted by:   Ports Fury

Pull in devel/readline on 4.x for enhanced command line editing
(and avoid possible implicit dependency when libreadline is already installed
at build-time)

- Add dependency on devel/libexecinfo for missing backtrace_*() symbols
- Use OPTIONS and enable Tcl/Tk by default [me]

PR:             ports/83905
Submitted by:   Konstantin Belousov

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Fix build on 5.3

PR:             ports/72042
Submitted by:   Yen-Ming Lee <leeym@FreeBSD.org>
Approved by:    portmgr (marcus)

- Use USE_ICONV knob

Approved by:    portmgr

BROKEN on !i386 and !alpha: Does not compile

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

- Update to version 2.1.5

PR:             59581
Submitted by:   Ports Fury

Update to version 2.1.4

PR:             54663
Submitted by:   KATO Tsuguru <tkato@prontomail.com> aka ports fury

update lang/smalltalk: 2.1.2 -> 2.1.3

PR:             54132
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

- update to 2.1.2
- also install the smalltalk site-lisp

PR:             52051
Submitted by:   Ports Fury

De-pkg-comment.

Update to 2.0.11

PR:             47077
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 2.0.10

PR:             46305
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

chase gdbm lib version

Upgrade to 2.0.8.

PR:             ports/45439
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Upgrade to 2.0.7.

Upgrade to 2.0.6.

PR:             ports/44115
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

upgrade to 2.0.1

PR:             39986
Submitted by:   Ports Fury

Replace ${PERL} with ${REINPLACE_CMD}

PR:             39605
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

Update to 1.95.13.a

PR:             37705
Submitted by:   Tilman Linneweh <tilman@arved.de>

Update to 1.95.13

PR:             37278
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 1.95.11

PR:             35962
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 1.95.10    

Update to 1.95.8    

upgrade to 1.95.7    

Number of commits found: 109 (showing only 100 on this page)

1 | 2  »  

4 vulnerabilities affecting 12 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2019-10-19 10:52:46