| non port: mail/claws-mail-pdf_viewer/Makefile |
|
SVNWeb
|
Number of commits found: 101 (showing only 100 on this page) |
|
Sun, 14 May 2023
|
[ 05:58 Tobias C. Berner (tcberner)  ]    edbe24d (Only the first 10 of 73 ports in this commit are shown above.  )
graphics/poppler: bump dependencies
|
|
Thu, 20 Apr 2023
|
[ 04:07 Tobias C. Berner (tcberner) ] 32edee2 (Only the first 10 of 73 ports in this commit are shown above. )
graphics/poppler: bump consumers after update to 23.04
graphics/poppler was updated in 06339c451266f5843e53bd6406c81a89eedd4ab1
|
|
Mon, 9 Jan 2023
|
[ 12:37 Tobias C. Berner (tcberner) ] 6f41724 (Only the first 10 of 71 ports in this commit are shown above. )
graphics/poppler: bump dependencies
Follow-up to 9b78681895a5a5b7225299242098f7f2f27d959c
|
|
Thu, 8 Dec 2022
|
[ 05:45 Tobias C. Berner (tcberner) ] e3d4360 (Only the first 10 of 72 ports in this commit are shown above. )
graphics/poppler: bump dependencies
|
|
Tue, 8 Nov 2022
|
[ 05:07 Tobias C. Berner (tcberner) ] 3a7ab00 (Only the first 10 of 71 ports in this commit are shown above. )
graphics/poppler: bump PORTREVISION of dependencies
- after update to 22.11 in d01d0d73b169
|
|
Sat, 8 Oct 2022
|
[ 14:42 Tobias C. Berner (tcberner) ] c8e8499 (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: bump port revision of poppler consumers
- poppler was updated to 22.10 in df406767857ddfc6d9580d72b1613a7cf8579bbc
|
|
Sun, 11 Sep 2022
|
[ 07:26 Tobias C. Berner (tcberner) ] 541d96e (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: bump port revision of consumers after upgrade to 22.09
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 9 Aug 2022
|
[ 05:50 Tobias C. Berner (tcberner) ] 016c054 (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: bump dependencies
Bump port revisions of poppler users after
04f1b0c1a895851aed9221282c1a503bc7415a37
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] b587cc2 (Only the first 10 of 577 ports in this commit are shown above. )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net> (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 6 Jul 2022
|
[ 16:25 Tobias C. Berner (tcberner) ] 7e5fe8f (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: bump PORTREVISION of poppler consumers
|
|
Sun, 5 Jun 2022
|
[ 14:03 Tobias C. Berner (tcberner) ] 7c24f75 (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: bump port revision of consumers after 22.06 upgrade
|
|
Fri, 20 May 2022
|
[ 09:31 Juraj Lutter (otis) Author: Milan Obuch ] 32ad969 (Only the first 10 of 33 ports in this commit are shown above. )
mail/claws-mail: Update to 3.19.0
- Update to 3.19.0
- Reset PORTREVISION where apropriate (notably in slave ports)
And while here, also portclippy and portfmt a bit.
Approved by: Chris Hutchinson <portmaster@bsdforge.com> (maintainer)
PR: 263059
|
|
Mon, 9 May 2022
|
[ 16:48 Tobias C. Berner (tcberner) ] f22f615 (Only the first 10 of 60 ports in this commit are shown above. )
graphics/poppler: bump portrevision of consumers
|
|
Tue, 26 Apr 2022
|
[ 16:59 Tobias C. Berner (tcberner) ] 7dd73cf (Only the first 10 of 60 ports in this commit are shown above. )
graphics/poppler: bump portrevision of consumers
Bump revisions after 0ee787592d5a due to so-version bump.
PR: 263009
|
|
Tue, 29 Mar 2022
|
[ 18:37 Tobias C. Berner (tcberner) ] 6f59b7b (Only the first 10 of 71 ports in this commit are shown above. )
graphics/poppler: bump consumers
Bump consumers of graphics/poppler after
e25859e09380f5930718094423dc8616cbb202b3
|
|
Mon, 13 Dec 2021
|
[ 20:13 Tobias C. Berner (tcberner) ] fd68e9e (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 21.12
Release 21.12.0:
core:
* Add API to add images
* CairoOutputDev: Fix de-duping of Flate images
* Fix crash on broken files when using non-default
ENABLE_ZLIB_UNCOMPRESS. Issue #393
* Minor code improvements
glib:
* Add API for validation of signatures
* Add API to read/save to file descriptor
utils:
* pdftohtml: Reduce sensitivity of duplicate detection. Issue #1117
build system:
* Increase C++ standard to 17
Exp-run by: antoine
PR: 260344
|
|
Mon, 8 Nov 2021
|
[ 15:16 Gleb Popov (arrowd) ] e886c38 (Only the first 10 of 61 ports in this commit are shown above. )
Bump PORTREVISION of graphics/poppler consumers.
PR: 259656
|
|
Tue, 12 Oct 2021
|
[ 18:23 Tobias C. Berner (tcberner) ] e140c1e (Only the first 10 of 73 ports in this commit are shown above. )
graphics/poppler: bump consumers after 2dee0997fbc9ee01991f73f0fa55f9b18908a264
|
|
Mon, 6 Sep 2021
|
[ 16:39 Tobias C. Berner (tcberner) ] 392e088 (Only the first 10 of 38 ports in this commit are shown above. )
poppler: bump revisions of users
Bump the remaining users of poppler after
d98b56f1deb5b6a03a7e04fc16192ecb2af9df1e
PR: 258206
|
|
Sun, 15 Aug 2021
|
[ 05:42 Tobias C. Berner (tcberner) ] 9a1df6a (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 21.08.0
Release 21.08.0:
core:
* Add API to allow addition and modification of outlines into a PDF
* Use additional samples to test for constant parts of an axial
gradient
* forms: Create fallback fonts for some well known font names
* Support reading the PDF Version from the Catalog
* Fix XRef::copy when there are modified objects
* Take into account that Date string may be in unicode
* JBIG2Stream: Fix regression in "Do not consider a size-0 to be an
error"
* Replace a local bubble sort implementation by std::sort
* Fix issues with malformed files
build system:(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 14 Jul 2021
|
[ 08:37 Tobias C. Berner (tcberner) Author: Chris Hutchinson ] 108b915
mail/claws-mail: update to latest 3.18.0
New in this release:
~~~~~~~~~~~~~~~~~~~~
* Support for the OAuth2 authorisation protocol has been added for
IMAP, POP and SMTP using custom, user-generated client IDs.
OAuth2 preferences are found in the Account Preferences on the
Receive page (for POP: Authenticate before POP connection, for
IMAP: Authentication method); the Send page (SMTP authentication:
Authentication method); and on a dedicated OAuth2 page.
* The option 'Save (X-)Face in address book if possible' has been
added to the /Message View/Text Options preferences page. (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Jul 2021
|
[ 20:00 Tobias C. Berner (tcberner) ] fac489c (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 21.07.0
Release 21.07.0:
core:
* JBIG2Stream: Do not consider a size-0 to be an error. Issue #535
* PSOutputDev: fix off-by-one error for image masking in L1/L2 output.
Issue #1088
* CairoOutputDev: Fix memory leak on broken files
* Minor code improvements
build system:
* set C standard to 11 without extensions
Exp-run by: antoine
PR: 256981
|
|
Mon, 7 Jun 2021
|
[ 13:26 Tobias C. Berner (tcberner) ] c567676 (Only the first 10 of 74 ports in this commit are shown above. )
graphics/poppler: update to 21.06.0
Release 21.06.0:
core:
* Fix rendering of some extended latin1 characters in annotations.
Issue #1070
* Support some not so well formed documents with password. Issue #1083
* Add API to get notified if the xref is reconstructed
* Add somewhat fancier left/right signature visual representation
* Fix crashes in malformed files
* Minor code improvements
qt6:
* Change some functions to return std::unique_ptr
qt5/qt6:(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 6 May 2021
|
[ 04:12 Tobias C. Berner (tcberner) ] cc4315b (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: update to 21.05.0
Release 21.05.0:
core:
* Fix crashes in malformed files
* Export SplashFont* symbols used by Scribus
* Minor code improvements
qt5/qt6:
* Make sure new signatures are always properly oriented
* Allow to pass the border width when signing
glib:
* Enhance find to support multi-line matching
utils:
* pdftoppm: Fix regression when using single scaleTo. Issue #1062
build system:
* Allow to disable building manual tests
PR: 255562
Exp-run by: antoine
|
|
Fri, 16 Apr 2021
|
[ 04:29 Tobias C. Berner (tcberner) ] 2f973a2 (Only the first 10 of 70 ports in this commit are shown above. )
graphics/poppler: update to 21.04.0
Release 21.04.0:
core:
* Hide symbols by default
* TextSelectionDumper: fix word order for RTL text
* Fix rendering of text in some files. Issue #1052
* Implement rendering of Masks of Image subtype. Issue #1058
* Forms: fix unclicking standalone form buttons. Issue #1034
glib:
* Expose more fields from MediaRendition in PopplerMedia
* Use stock glib macro to define boxed type
* Remove incorrecly used volatile from enum type registration code
(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 8 Mar 2021
|
[ 19:32 tcberner ]   (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 21.03.0
Release 21.03.0:
core:
* Fix parsing text in some broken pdf files. Issue #1040
* Fix memory issue when using threads. Issue #1050
* TextSelectionDumper: Fix getText() for space after word
* Change signature of OutputDev:tilingPatternFill
* Make PDFDocBuilder return a std::unique_ptr
* Improve well formed check for shading functions
* Fix leak in case of fread failing
* Fix memory leak in broken file in JBIG2Stream::readGenericBitmap
* PSOutputDev: Fix stack overflow in broken files
glib:(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 9 Feb 2021
|
[ 11:10 tcberner ] (Only the first 10 of 74 ports in this commit are shown above. )
graphics/poppler: update to 21.02
Release 21.02.0:
core:
* GfxCal*ColorSpace: introduce Bradford transform for chromatic
adaptation
* Fix memory leak if saving the file fails
* Internal code improvements
* Fix various issues handling broken files
* Make checkedAdd work for long long in MSVC
qt5:
* Properly export NewSignatureData class
* Fix regression in QIODeviceOutStream + MSVC
qt6:
* Properly export NewSignatureData class
* Fix regression in QIODeviceOutStream + MSVC
utils:
* pdftohtml: Fix error() parameter type
PR: 253183
Exp-run by: antoine
|
|
Thu, 7 Jan 2021
|
[ 19:23 tcberner ] (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 21.01.0
Release 21.01.0:
core:
* Faster routines for jpeg decoding
* Fix reading signatures in encrypted files
* Add white point correction when lcms is used
* JBIG2Stream: Fix byte counting
* Fix potential data loss if we try to fetch a non existing Ref after
modifying the document
* Specifically use DeviceGray instead of DefaultGray for softmasks
* Fix various issues handling broken files
utils:
* pdftocairo: Setmode binary for windows
* pdfsig: Add hability to digitally sign files(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 11 Dec 2020
|
[ 20:10 tcberner ] (Only the first 10 of 68 ports in this commit are shown above. )
graphics/poppler: update to 20.12.0
Changelog:
core:
* Draw better circles for circle annotations
* Fix annotation line width if no appearance stream or style are given
* Tweak rendering of highlight annotations
* Fix border rendering of some annotations
* Fix rendering of some files. Issue #976 Issue #567
* PSOutputDev: provide options to set the rasterization color space and
ICC profile
* PSOutputDev: for splashModeCMYK8 and language level >=2 activate
overprint emulation
* PSOutputDev: use the DeviceN8 bitmap for rasterization with
CMYK-output + overprint
* Use the font name without subset tag when querying for a system font
* Splash: Fix wrong x adjustment during clipping
* Splash: Fix blitImage in uncolored tiling patterns(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 26 Nov 2020
|
[ 17:18 joneum ]
Update to 3.17.8
Full Changelogs: https://www.claws-mail.org/NEWS
PR: 251092
Sponsored by: Netzkommune GmbH
|
|
Tue, 3 Nov 2020
|
[ 19:48 tcberner ] (Only the first 10 of 73 ports in this commit are shown above. )
graphics/poppler: update to 20.11.0
Release 20.11.0:
core:
* More work on rendering of standalone Annot Widgets. Issue #806
* Fix crashes in embedded file handling on broken files. Issue #967
* Fix uninitialized memory read on broken files
* Save a bit of memory in Dict data
cpp:
* Fix crashes in embedded file handling on broken files. Issue #966
utils:
* pdftohtml: HTML and XML output includes font opacity.
(Only the first 15 lines of the commit message are shown above )
|
|
Sun, 11 Oct 2020
|
[ 10:58 tcberner ] (Only the first 10 of 69 ports in this commit are shown above. )
graphics/poppler: update to 20.10.0
Release 20.10.0:
core:
* Filter out repeated forms
* Implement EmbedStream::reset()
* CairoOutputDev: evict just font faces owned solely by cache.
* Splash: Rename Yd to Ydown, Xu to Xup, etc.
* Splash: fix crash in out-of-memory situation.
* Fix some undefined behaviour situation with forged files
PR: 250052
Exp-run by: antoine
|
|
Thu, 10 Sep 2020
|
[ 18:32 tcberner ] (Only the first 10 of 76 ports in this commit are shown above. )
graphics/poppler: update to 20.09.0
Release 20.09.0:
core:
* Compability fix for Forms
* Fix fetching of Objects failing in some cases
* Fix clearing date in Annot setModified/setDate
* TextSelectionPainter: support glyphless fonts
* Splash: Don't try read past end of image
* avoid abort() on large memory allocation
* Fix memory leak on broken files
* Fix potential invalid memory read
* Small code improvements
qt5:(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 14 Aug 2020
|
[ 04:22 tcberner ] (Only the first 10 of 74 ports in this commit are shown above. )
Bump revisions of poppler consumers after r544863
|
|
Mon, 6 Jul 2020
|
[ 06:17 tcberner ] (Only the first 10 of 75 ports in this commit are shown above. )
graphics/poppler: update to 0.90
Release 0.90.0:
core:
* Color profile tweaks
* Small signature improvements
* BBoxOutputDev: Fix calculation when type3 fonts are involved
* Fix potential crash when reading Forms
* Fix infinite loop in broken file
glib:
* Fix adding annots in rotated pages
* Add ability to reset forms
* Several fixes to the documentation
qt5:
* Make it clear we require Qt 5.5(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 11 Jun 2020
|
[ 17:49 mandree ] (Only the first 10 of 42 ports in this commit are shown above. )
mail/claws-mail: reorganize plugins
renames a few ports to match their names to the plugin names
(adding to MOVED)
PR: 245939
PR: 239659
Submitted by: rozhuk.im@gmail.com
Approved by: Chris Hutchinson <portmaster@bsdforge.com> (maintainer)
|
|
Tue, 2 Jun 2020
|
[ 14:47 tcberner ] (Only the first 10 of 76 ports in this commit are shown above. )
graphics/poppler: update to 0.89.0
Release 0.89.0:
core:
* Add support for ResetForm action. Issue #225
* Fix crash in PDFDoc::getSignatureFields when there's no Forms at all
* Fix exporting to PS of some files with CID fonts
* Use ICC profiles in PS output (if new enough lcms is used)
* Allow almost-singular tiling pattern matrices. Issue #894
* Fix memory leak when failing to load some fonts
* CairoOutputDev: Use stroke opacity when clipping to a stroke path
* CairoOutputDev: Fix tiling patterns when pattern cell is too far.
Issue #190
glib:
* Add poppler_movie_get_aspect
cpp:
* Add the font infos to the text_box object
Exp-run by: antoine
PR: 246848
|
|
Sat, 2 May 2020
|
[ 10:00 tcberner ] (Only the first 10 of 76 ports in this commit are shown above. )
graphics/poppler: update to 0.88.0
Release 0.88.0:
core:
* Support Widget Annotation Buttons not linked to any Form
* SplashOuputDev: Use stroking opacity when clipping to a stroke path
* Handle 1 bit RGB images in ICC colorspace
* Internal code improvements
qt5:
* Add Document::signatures. Returns signatures not attached to any page
* ArthurOutputDev: Fix font hinting
* ArthurOutputDev: Set the opacity when filling with axial gradients
* ArthurOutputDev: Implement the clipToStrokePath method(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 2 Apr 2020
|
[ 04:41 tcberner ] (Only the first 10 of 78 ports in this commit are shown above. )
graphics/poppler: update to 0.87.0
Release 0.87.0:
core:
* Fix crashes due to inconsistent vtables for Clang builds
* Fix leak in broken files
* Internal code improvements
qt5:
* Add option to get form choice for export value
* ArthurOutputDev: Avoid division by zero in updateLineDash. Issue #695
glib:
* Internal code improvements
utils:
* pdftohtml: Fix memory leak in HtmlOutputDev::getLinkDest
PR: 245150
Exp-run by: antoine
|
|
Sat, 21 Mar 2020
|
[ 12:57 tcberner ] (Only the first 10 of 78 ports in this commit are shown above. )
Update poppler to 0.86.1
Release 0.86.1:
core:
* Fix regression in Browse Link handling
* Internal code improvements
Release 0.86.0:
core:
* Fix link content exfiltration attack
* Splash: Implement gouraudTriangleShadedFill for some non parametrized
shadings. Issue #881
* Fix case unsensitive search for Old Hungarian, Warang Citi,
Medefaidrin and Adlam
* Internal code improvements
glib:(Only the first 15 lines of the commit message are shown above )
|
|
Mon, 3 Feb 2020
|
[ 19:32 tcberner ] (Only the first 10 of 72 ports in this commit are shown above. )
Bump revision of poppler dependencies
- poppler was updated in r525051, bump revisions
|
|
Wed, 22 Jan 2020
|
[ 17:59 tcberner ] (Only the first 10 of 88 ports in this commit are shown above. )
graphics/poppler: update to 0.84.0
Release 0.84.0:
core:
* Fix crash when converting from Unicode to ASCII-7
* Splash::scaleImageYdXu: Protect against crash if srcWidth is too big
* JBIG2Stream: fix potential crash in malformed documents
* JBIG2Stream: fix leak in reset() if called several times
* Internal code improvements
utils:
* pdfimages: Add error message if first page is larger then number of
pages.
* pdfinfo: Improved paper size recognition
* pdfsig: Fix exit code when dumping signatures
* pdftocairo: Error out when even/odd selects 0 pages(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 1 Nov 2019
|
[ 21:51 tcberner ] (Only the first 10 of 92 ports in this commit are shown above. )
graphics/poppler: update to 0.82.0
Release 0.82.0:
core:
* Fix not being able to open some files. Issue #832
* Fix crashes in malformed files
* Fix memory leak on broken files
* Minor performance improvements
* Minor code improvements
glib:
* Add poppler_document_new_from_bytes
* PopplerAttachment: Silence deprecation warnings for ctime/mtime
build system:
* pdf-inspector: Support builddir != srcdir
* Install Cairo* headers if Cairo has been found
Thanks to adridg@ for fixing all the fallout.
Exp-run by: antoine
PR: 241532
Approved by: gnome (kwm, implicit)
|
|
Sun, 29 Sep 2019
|
[ 07:25 tcberner ] (Only the first 10 of 55 ports in this commit are shown above. )
graphics/poppler: update to 0.81.0
Release 0.81.0:
core:
* Splash: Always enable support for CMYK rasterization
* CairoOutputDev: Check scaled dimensions for 0. Issue #737
* BaseCryptStream: Fix potential uninitialized memory read
* SplashBitmap: Fix wrong width condition for splashModeDeviceN8
* Fix crashes in malformed files
PR: 240781
Exp-run by: antoine
Approved by: gnome (kwm, implicit)
|
|
Sun, 1 Sep 2019
|
[ 20:46 tcberner ] (Only the first 10 of 60 ports in this commit are shown above. )
graphics/poppler: update to 0.80.0
Release 0.80.0:
core:
* Annotations: Implement support for setting a different text in the appearance
stream than the real text
* Splash: Optionally use small_vector from boost
* Fix memory leaks on broken files
* Fix abort on broken files
* Small code simplifications
* Remove USE_FIXEDPOINT support. Issue #821
qt5:
* Fix MSVC build
* Add subsitute-font information
* Fix since marker of some functions (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 5 Aug 2019
|
[ 07:28 joneum ]
Update to 3.17.4
* New HTML viewer plugin: Litehtml viewer
* Added option 'Enable keyboard shortcuts' to the 'Keyboard
shortcuts' frame on /Configuration/Preferences/Other/Miscellaneous
* Compose: implemented copying of attached images to clipboard
* Compose: images and text/uri-list (files) can now be attached by
pasting into the Compose window
* Python plugin: window sizes are now remembered for the Python
console, the 'Open URLs' and the 'Set mailbox order' windows.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 31 Jul 2019
|
[ 21:14 tcberner ] (Only the first 10 of 55 ports in this commit are shown above. )
graphics/poppler: update to 0.79.0
Release 0.79.0:
core:
* Fix regression on TextSelectionPainter
* Fix parsing of DefaultAppearance
* Fix memory leak in PostScriptFunction
* Fix crashes in fuzzed files
qt5:
* Implemented support for setIcon by changing appearance
* Added option to set the form available to print
* QString::null is deprecated, use QString()
* Replace deprecated qStableSort with std::stable_sort
build system:
* Turn README into README.md and expand it
PR: 239277
Exp-run by: antoine
Approved by: gnome (kwm, implicit)
|
|
Sat, 29 Jun 2019
|
[ 08:55 tcberner ] (Only the first 10 of 56 ports in this commit are shown above. )
graphics/poppler: update to 0.78.0
Release 0.78.0:
core:
* Fix line annotation arrows for usage in dimensioning
* Handle Ink annots without an InkList but with an AP
* Fix typos preventing parsing of Movie start and duration
* Fix crash on malformed files
glib:
* Add poppler_document_create_dests_tree()
* Don't use the deprecated g_type_class_add_private()
* Document the differences between render() and render_for_printing()
* Fix introspection for poppler_document_new_from_data
* Don't create PopplerInputStream with length 0. Issue #414(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 1 Jun 2019
|
[ 06:39 tcberner ] (Only the first 10 of 66 ports in this commit are shown above. )
graphics/poppler: update to 0.77.0
Release 0.77.0:
core:
* Fix crash on signature handling. Issue #766
* Fix small memory leak in SignatureHandler::getCertificateInfo
* Splash: Restrict filling of overlapping boxes. Issue #750
* Fix crash on malformed files
qt5:
* Fix optional content handling with exclusive layers
cpp:
* Make render_page thread-safe
utils:
* pdfsig: Fix small memory leak
* pdftotext: Fix typo in manpage
PR: 238115
Exp-run by: antoine
Approved by: gnome (kwm, implicit)
|
|
Mon, 13 May 2019
|
[ 18:33 tcberner ] (Only the first 10 of 75 ports in this commit are shown above. )
graphics/poppler: update to 0.76.1
From Changelog at https://poppler.freedesktop.org/releases.html :
Release 0.76.1:
core:
* Make the mul tables be calculated at compile time with constexpr.
* splash: Fix compile with SPLASH_CMYK enabled
* Some typo fixing in error messages
qt5:
* Fix regression in annotation handling
build system:
* Fix some typos in build system output and comments(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 31 Aug 2017
|
[ 14:35 pawel ]
Update to Claws Mail 3.15.1 bugfix release
This is a bug-fix release:
~~~~~~~~~~~~~~~~~~~~~~~~~~
* Bug fixes:
o bug 3348, 'Contact pictures not deleted when contact is
deleted'
o bug 3721, 'Fails to build in Debian kfreebsd-*'
o bug 3744, 'Crash upon deleting tags.'
o bug 3822, 'AttRemover deletes message and fails to create
new one when disk is full'
o bug 3828, '"Re-edit" should not recycle the Message-ID
header'
o bug 3835, 'autogen.sh fails with invalid test on line 33'
o bug 3855, 'segfault at startup with old profile and IMAP
account'
o bug 3866, 'slibtool causes compile failure'
o fix crash in sieve manager window when no account has sieve
enabled.
o fix incorrect labels in folder selection dialog.
o fix RSSyl feeds getting renamed to "Untitled feed".
o fix Resent-Date value.
o Fix typo around libarchive in configure.ac.
|
|
Thu, 24 Aug 2017
|
[ 13:45 swills ] (Only the first 10 of 31 ports in this commit are shown above. )
Bump PORTREVISION after recent poppler update
|
|
Mon, 17 Apr 2017
|
[ 14:07 pawel ]
- Update to 3.15.0 Claws Mail release
- Fix python shebangs
- claws-mail-tnef now requires external ytnef
- claws-mail-vcalendar marked as IGNORE for now, needs newer libical
Release notes: http://claws-mail.org/news.php
|
|
Sat, 7 Jan 2017
|
[ 10:42 olivierd ] (Only the first 10 of 50 ports in this commit are shown above. )
Chase update of graphics/poppler (and slaves ports) in revision r430777
|
|
Sun, 13 Nov 2016
|
[ 10:41 pawel ]
Update to Claws Mail 3.14.1 release
Changes: http://claws-mail.org/news.php
|
|
Mon, 5 Sep 2016
|
[ 20:02 olivierd ] (Only the first 10 of 50 ports in this commit are shown above. )
Chase update of Poppler after revision r421386
|
|
Tue, 9 Aug 2016
|
[ 22:33 pawel ]
- Update to Claws Mail release 3.14.0
- Register proxy dependencies found by stage-qa
Changes: http://claws-mail.org/news.php
|
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 24 Mar 2016
|
[ 15:47 tijl ] (Only the first 10 of 95 ports in this commit are shown above. )
Make print/ghostscript9-agpl-base the default Ghostscript port. Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.
Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.
Fix print/ghostscript9-agpl-base to install eps2write.
Update math/asymptote to 2.37 to support newer Ghostscript.
PR: 208159
Exp-run by: antoine
Approved by: portmgr (antoine)
|
|
Thu, 21 Jan 2016
|
[ 19:40 kwm ] (Only the first 10 of 61 ports in this commit are shown above. )
Update poppler to 0.40.0. [1]
Add patches to py-poppler [2] and rubygem-poppler [3] to fix the build
of these ports with poppler 0.39+.
PR: 206293 [1]
Submitted by: olivierd@ [1]
Obtained from: ubuntu [2], rubygem-poppler upstream [3]
|
|
Fri, 16 Oct 2015
|
[ 18:35 pawel ]
Update to Claws Mail release 3.13.0
Release notes: http://claws-mail.org/news.php
|
|
Sat, 22 Aug 2015
|
[ 17:48 hrs ] (Only the first 10 of 354 ports in this commit are shown above. )
- Split ghostscript into X11-independent and -dependent parts:
* print/ghostscript{7,8,9,9-agpl}-base
Installs Ghostscript binary, libgs, and related files.
These ports do not depend on X11 libraries (i.e. x11* devices
are not available). USES=ghostscript will set dependency on
one of them depending on GHOSTSCRIPT_DEFAULT.
The default device is set to "display" or "bbox".
* print/ghostscript{7,8,9,9-agpl}-x11
Installs a shared library which provides X11 support to
the installed Ghostscript binaries. x11* devices will be(Only the first 15 lines of the commit message are shown above )
|
|
Sun, 2 Aug 2015
|
[ 16:06 kwm ] (Only the first 10 of 58 ports in this commit are shown above. )
Update poppler to 0.34.0. [1]
Chase all users of shlib version change of libpoppler.so.
PR: 201477 [1]
Submitted by: olivierd@ [1]
|
|
Fri, 31 Jul 2015
|
[ 20:58 pawel ] (Only the first 10 of 12 ports in this commit are shown above. )
- Update Claws Mail & plugins to version 3.12.0
- Fetch distfile from project site, SF distribution is postponed till
situation with site is clear
- Include configure patch that prevents linking all binaries to libarchive [1]
- Switch archiver plugin to USES=libarchive [1]
- Add new Manage Sieve plugin which allows manipulation of IMAP filters
- Mark gdata plugin as IGNOREd, needs newer version of devel/libgdata
library, which is not in ports yet
Release notes: http://claws-mail.org/news.php
PR: 201949 [1]
Submitted by: tijl [1]
|
|
Thu, 16 Jul 2015
|
[ 20:53 kwm ] (Only the first 10 of 89 ports in this commit are shown above. )
Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.
Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl
PR: 201201 (exp-run)
Approved by: portmgr (mat@)
Exp run by: antione@ (previous patch)
Differential Revision: https://reviews.freebsd.org/D2938
|
|
Tue, 3 Feb 2015
|
[ 12:28 kwm ] (Only the first 10 of 55 ports in this commit are shown above. )
Update poppler to 0.30.0 [1].
Make sure we use openjpeg1 in poppler, while openjpeg2 support
was added there still bugs in openjpeg2 that need to be fixed.
Add patches to inkscape for API changes in poppler 0.29.0 [2].
PR: 196599 [1]
Submitted by: olivierd@ [1]
Exp-run by: antoine@
Obtained from: upstream [2]
|
|
Tue, 25 Nov 2014
|
[ 12:55 makc ] (Only the first 10 of 51 ports in this commit are shown above. )
Bump PORTREVISION after graphics/poppler update to 0.26.3
|
|
Tue, 27 May 2014
|
[ 21:11 pawel ]
mail/libetpan:
- Update to version 1.5, development moved to github
- Convert to USES=libtool, don't install la file
- Install striped version of library
- Allow to compile with OpenSSL from base
- Update homepage address
- Bump affected deskutils/cairo-dock-plugins
mail/claws-mail:
- Update to version 3.10.0
- Convert to USES=libtool tar:bzip2 [1]
- Don't install static plugin files [1]
- Replace GMAKE with MAKE_CMD [1]
Release notes: http://claws-mail.org/news.php
mail/claws-mail-clamd:
- Don't show pkg-message in post-install, staging takes care of that
Submitted by: tijl via private mail [1]
|
|
Fri, 27 Dec 2013
|
[ 16:54 kwm ] (Only the first 10 of 56 ports in this commit are shown above. )
Update poppler to 0.24.4.
Update comment.
Use new LIB_DEPENDS syntax, use USES=pathfix.
Stagify.
Bump portrevision of all affected ports, and Update poppler* LIB_DEPENDS to
new syntax.
|
|
Sat, 5 Oct 2013
|
[ 11:25 pawel ] (Only the first 10 of 28 ports in this commit are shown above. )
- Fix comboboxes vcalendar bug by adding upstream patches [1]
- Add support for STAGEDIR
- Properly set configure iconv args
PR: ports/182439 [1]
Reported by: Gerard Seibert <gerard@seibercom.net>
|
|
Fri, 20 Sep 2013
|
[ 19:59 bapt ] (Only the first 10 of 748 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)
|
|
Thu, 29 Aug 2013
|
[ 15:01 pawel ] (Only the first 10 of 24 ports in this commit are shown above. )
- Switch to new LIB_DEPENDS format
- Convert USE_PERL5 to USES
- Remove stale MAKE_JOBS_SAFE
- Trim dependencies where they are too detailed
|
|
Sat, 11 May 2013
|
[ 14:10 pawel ] (Only the first 10 of 61 ports in this commit are shown above. )
Update to Claws Mail 3.9.1 release
Changelog: http://claws-mail.org/news.php
claws-mail:
- Now whole release is distributed as one file
- Move common stuff to Makefile.claws
- Cleanup many accumulated, old and not needed things
- Move bogofilter, pgp and spamassassin plugins to separate ports
- Dillo plugin was dropped so drop option for it
plugins:
- All plugins ports are now slaves to main port
- Remove all distinfo and pkg-plist files - this is
now handled by main port
- Deprecate cachesaver and gtkhtml2_viewer plugins - they are not
maintained by upstream anymore
|
|
Sat, 27 Apr 2013
|
[ 11:59 mva ] (Only the first 10 of 219 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here
Reviewed by: zeising
|
|
Wed, 24 Apr 2013
|
[ 18:10 ak ] (Only the first 10 of 1028 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 3)
Approved by: portmgr (bapt)
|
|
Mon, 10 Dec 2012
|
[ 17:27 pawel ] (Only the first 10 of 73 ports in this commit are shown above. )
Update to Claws Mail 3.9.0 release
Changelog: http://www.claws-mail.org/news.php
claws-mail:
- Remove leading article from COMMENT
- Add missing deps
- Modernize options descriptions
- Respect NLS option
- Remove shlib ABI versions from LIB_DEPENDS
plugins:
- Bump plugins with no new versions
- Remove stale patches
- Improve COMMENTs, be more verbose what plugin does, use official
Claws Mail name, remove leading articles
- Convert WWW: lines from tabs to spaces
|
|
Sat, 30 Jun 2012
|
[ 15:35 pawel ]
- Readd mail/claws-mail-pdf_viewer, licensing of xpdf and poppler libraries
has changed and now is compliant with GPLv3 which claws-mail uses
- Update to version 0.9.2
- Depend on graphics/poppler-glib
- Correctly use LDFLAGS, CFLAGS
- Convert to OptionsNG
- Add homepage, LICENSE
|
|
Tue, 7 Jul 2009
|
[ 18:15 miwi ]
This plugin is not longer developed/supported by claws-mail team due to
licensing problems. Poppler lib that this plugin uses contains code from
xpdf package which is licensed under GPLv2 only (no "or later" part) and
claws-mail uses GPLv3.
According to FSF GPLv2 only and GPLv3 are incompatible. Also this plugin
doesn't work with new claws-mail anyway.
PR: 136431
Submitted by: "Pawel Pekala" <c0rn@o2.pl> (maintainer)
|
|
Sat, 4 Jul 2009
|
[ 23:06 miwi ]
- Bump PORTREVISION after claws-mail update
|
|
Mon, 12 Jan 2009
|
[ 12:53 miwi ]
- Chase claws-mails shlib bump
|
|
Wed, 20 Aug 2008
|
[ 00:57 ade ] (Only the first 10 of 398 ports in this commit are shown above. )
Conversion from (now defunct) autoconf-2.61 to autoconf-2.62
Tested by: exp build run (erwin)
|
|
Mon, 30 Jun 2008
|
[ 20:16 mezz ] (Only the first 10 of 69 ports in this commit are shown above. )
First all, ahze did most of work. Thanks ahze! Last week or so, I am just
merely pick up and help him. Thanks to many testers in both private and
mailing list emails for report a few of build and dependencies problems.
Also, thanks to marcus and Chess Griffin for test in their tinderboxes.
x11/pixman: Update to 0.10.0
-------------------------------------------------------
Firefox 3 needs it. Orignal, the shared library was bumped and ahze has
added a new feature in our USE_GNOME=ltverhack by can control the number
of shared library. To control the number of shared library, add the
ltverhack:N. Right now pixman has USE_GNOME=ltverhack:9 to make it stays
same at libpixman-1.so.9. If anyone want to use ltverhack:N in one of your
port, you need to make sure the ABI doesn't change to use it..
-------------------------------------------------------
(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 28 Jun 2008
|
[ 14:42 miwi ]
- Add support for WITHOUT_NLS knob [1]
- Bump PORTREVISION after claws-mail update
PR: 124108 [1]
Submitted by: Pawel Pekala <c0rn@o2.pl> (maintainer)
|
|
Fri, 6 Jun 2008
|
[ 13:43 edwin ] (Only the first 10 of 159 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sat, 19 Apr 2008
|
[ 21:29 miwi ]
- Update to 0.9.1
Approved by: maintainer implicit
|
|
Fri, 21 Mar 2008
|
[ 16:35 miwi ] (Only the first 10 of 14 ports in this commit are shown above. )
- Get rid of USE_XLIB
Approved by: maintainer implicit
|
|
Thu, 28 Feb 2008
|
[ 00:50 miwi ] (Only the first 10 of 16 ports in this commit are shown above. )
- Bump PORTREVISION after claws-mail update
Approved by: maintainer implicit
|
|
Tue, 12 Feb 2008
|
[ 22:20 miwi ]
- Update to 0.9
Approved by: maintainer implicit
|
|
Tue, 2 Oct 2007
|
[ 15:50 miwi ] (Only the first 10 of 16 ports in this commit are shown above. )
- Bump PORTREVISION after claws-mail update
|
|
Tue, 18 Sep 2007
|
[ 12:09 miwi ] (Only the first 10 of 14 ports in this commit are shown above. )
- Bump PORTREVISION after claws-mail update
|
|
Thu, 6 Sep 2007
|
[ 21:32 miwi ]
- Update to 0.6
Approved by: maintainer implicit
|
|
Sat, 7 Jul 2007
|
[ 12:17 miwi ]
- Update to 0.5
PR: 114250
Submitted by: miwi
Approved by: maintainer
|
|
Tue, 29 May 2007
|
[ 15:55 miwi ] (Only the first 10 of 19 ports in this commit are shown above. )
- Update to 2.9.2
- Bump PORTREVISION in all plugins.
Approved by: netchild@ (maintainer)
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Tue, 24 Apr 2007
|
[ 22:12 miwi ]
- Update to 0.4
PR: 112069
Submitted by: miwi
Approved by: maintainer
|
|
Thu, 19 Apr 2007
|
[ 10:45 miwi ] (Only the first 10 of 16 ports in this commit are shown above. )
- Update to 2.9.1
- Bump PORTREVISION for all claws-mail-*
Approved by: netchild@
Security:
http://www.vuxml.org/freebsd/c389d06d-ee57-11db-bd51-0016179b2dd5.html
|
|
Tue, 17 Apr 2007
|
[ 18:09 miwi ]
- Update to 0.3
PR: 111740
Submitted by: miwi
Approved by: maintainer via privat mail
|
|
Mon, 12 Mar 2007
|
[ 13:54 netchild ] (Only the first 10 of 18 ports in this commit are shown above. )
- Update CM to 2.8.1.
- Bump portrevision of the plugins.
|
Number of commits found: 101 (showing only 100 on this page) |
As an Amazon Associate I earn from qualifying purchases.