Number of commits found XX: 177 (showing only 100 on this page)

1 | 2  »  

Update courier-imap to 5.0.11

No need to force location of COURIERAUTHCONFIG. Let configure get it from the
PATH.

Forcing it could brake build when using non standard PREFIX.

Reported by:	Mark Dickey <mark@bestweb.net> (via email)

Update courier-imap to 5.0.10

Drop the ipv6 virtual category for m* category as it is not relevant anymore

Update courier-imap to 5.0.8

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

dns/libidn: Update to 1.35

Bump 48 ports.
Previous update to 1.34 broke jabberd.

PR:		228048

Update courier-imap to 5.0.7

Update courier-imap to 5.0.6

- Update courier-imap to 5.0.5

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Upgrade courier-imap to 5.0.4

Fixes some pop3 and unicode issues.

PR:		233599
Submitted by:	hsakamt@tsnr.com

Update `databases/gdbm' to version 1.18.1, an important bugfix release
which restores compatibility with old databases (version 1.8) and some
later versions which were built without mmap(2) support.  Due to shlib
version change, bump port revisions of the consumer ports.

PR:		233059
Exp-run by:	antoine
Approved by:	maintainer (johans, numerous timeouts)

- Update devel/courier-unicode to 2.1
- Convert to USES localbase
- Update mail/cone to 1.0 [1]
- Update mail/courier-imap to 5.0.0
- Add LICENSE
- Update mail/maildrop to 3.0.0
- Remove IDN option since it's now mandatory
- Update mail/sqwebmail to 6.0.0 [2]
- Update security/courier-authlib to 0.69.0
- Add note to UPDATING
- Silence some portlint warnings

PR:			231471 [1]
Submitted by:		me
Approved by:		Maintainer timeout [1],
			oliver@ [2]
Differential Revision:	https://reviews.freebsd.org/D17234

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

Adjust USES to fix building on gcc-based archs (in particular, powerpc64).

On the clang architectures, these changes have no effect: the baser
compiler already includes the needed features.

While here, remove now-redundant CXXFLAGS statements and pet portlint
(no other content change).

Tested on both powerpc64 and amd64.

Approved by:	portmgr (tier-2 blanket)

- Update courier-imap to 4.18.2
- Replace deprecated plist @ macros with supported ones

- Update mail/courier-imap to 4.18.1
- Convert to USES=localbase
- Convert to OPTION helpers (where safe)
- Use a pkg-message in place of ECHO_MSG

- Update devel/courier-unicode to 2.0
- Update mail/cone to 0.96
- Update mail/courier-imap to 4.18.0 [1]
- Update mail/maildrop to 2.9.0
- Update mail/sqwebmail to 5.9.0 [1]
- Update security/courier-authlib (and slaves) to 0.68.0 [1]

On request from oliver@, take maintainership of the courier-authlib
ports and the courier-imap port.

Approved by:		oliver@ (maintainer) [1]
Differential Revision:	https://reviews.freebsd.org/D11467

mail/courier-imap: Handle no SSLv3 method (fixes build with LibreSSL)

Approved by:	SSL blanket

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Update to devel/courier-unicode to 1.4
- Chase shlib bump

- Update mail/courier-imap to 4.16.2
- Update mail/sqwebmail to 5.8.3
- Update security/courier-authlib to 0.66.3
- Remove no more needed patch from mail/maildrop

Approved by:		oliver (maintainer)
Differential Revision:	https://reviews.freebsd.org/D2975

- Update courier-unicode to 1.2
- Update courier-imap to 4.16.1
- Update maildrop to 2.8.2
- Update sqwebmail to 5.8.2
- Update courier-authlib to 0.66.2
- Some plist and Makefile modernization

Approved by:		oliver@ (as maintainer of various of these ports)
Differential Revision:	https://reviews.freebsd.org/D2391

- Display a stage-qa warning when ports use PREFIX/var instead of /var
- Add --localstatedir=/var to _LATE_CONFIGURE_ARGS (like --mandir) but not
  when CONFIGURE_ARGS already sets it.  (GNU configure scripts set it to
  PREFIX/var when PREFIX != /usr.)
- Add --localstatedir="${PREFIX}/var" to CONFIGURE_ARGS in some ports so
  they aren't affected by this change (for now at least).  This commit is
  meant to ensure that new ports don't make the same mistake.

- games/acm: the configure script in this port is very old; instead of
  patching it more, just replace GNU_CONFIGURE with HAS_CONFIGURE.
- irc/charybdis: it already used /var but adding --localstatedir=/var
  changed the behaviour of the configure script; adjust the port to this.

PR:		199506
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Remove last occurences of USE_BZIP2

- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
  adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
  developers)

PR:		191274
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Convert GMAKE to MAKE_CMD
Please note that lots of invocation of MAKE_CMD here are wrong as they do not
properly respect MAKE_ENV and friends

With hat:	portmgr

remove -rpath as it is causing problems with new CLang on CURRENT

add GNUTILS option

PR:		ports/183705
Submitted by:	madpilot

update to 4.15

Convert the tree to USES=fam

Approved by:	portmgr (bapt)

update to 4.14

Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

- adoption of optionsNG

Approved by:	portmgr (miwi)

remove DRAC support as the patch is no longer working

update courier-imap to 4.13

update to 4.12.0

update to 4.11.0

Feature safe:	yes

update courier-imap to 4.10.0

Feature safe:   yes

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Track dependencies after databases/gdbm update

update to 4.9.3
include updated DRAC patch [1]

PR:             ports/157619 [1]
Submitted by:   AIDA Shinra <shinra@j10n.org> [1]

update to 4.9.1

update to 4.8.1
replace hardcoded dependency to libfam with USE_FAM [1]

PR:             ports/150254 [1]
Submitted by:   Wayne Sierke <ws@au.dyndns.ws> [1]

update to 4.8.0

update to 4.7.0

update to 4.6.0

Feature safe:   yes

- Switch SourceForge ports to the new File Release System: categories starting
with M

update to 4.5.1

update to 4.5.0

update to 4.4.1
disable DRAC support since the supplied patch is no longer compatible with 4.4.1
and the author has not updated it :/

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

update to 4.3.1

Rework to use the newer USE_RC_SUBR method

PR:             119873
Submitted by:   ade
Approved by:    oliver (maintainer)

remove the openssl configure option - there is none any more

resetting PORTEPOCH wasn't the brightest idea at all

Noted by:       "Derkjan de Haan" <haanjdj@gmail.com>
Pointy hat to:  myself

update to 4.3.0

change the default setting TLS_PROTOCOL=SSL3 to TLS_PROTOCOL=SSL23 to try
SSLv2 and SSLv3 instead of SSLv3 only - this fixes the error some people
where experiencing with the ssl clients:

connect: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number

Noted by:       Oliver Brandmueller <ob@e-Gitt.NET>
Suggested by:   Oliver Brandmueller <ob@e-Gitt.NET>

update to 4.2.1

Remove always-false/true conditions based on OSVERSION 500000

update to 4.2.0

update to 4.1.3

update to 4.1.2

add DRAC to OPTIONS again

update to 4.1.1

Remove USE_REINPLACE from ports starting with M

fix FAM handling when BATCH is defined

Reported by:     Bjoern Voigt <bjoern@cs.tu-berlin.de>

update DRAC patch

Submitted By:   Mamoru KOMACHI <usata@usata.org>

update to 4.1.0

BROKEN when WITHOUT_SSL: Incomplete pkg-plist

finally fix the compilation without fam even if it's installed

disable FAM when WITHOUT_FAM is set - even when fam is installed (requires
some configure changes since there is no --without-fam option)

PR:             88205

readd DRAC functionality

Submitted by:   Mamoru KOMACHI <usata@usata.org>

change
COURIERAUTHCONFIG=${LOCALBASE}/bin/courierauthconfig
to
COURIERAUTHCONFIG=${PREFIX}/bin/courierauthconfig

make the configure a bit more readable, and enhance a prefixed installation.

PR:             86609
Submitted by:   Martin Piayda <martin.piayda@udo.edu>

update to 4.0.6

update to 4.0.5

right now, there is no 4.0.4 compatible drac patch - so mark it borken when
WITH_DRAC was specified and remove DRAC from the options list.

PR:             84388
Submitted by:   Ryota <miyaoka@saku2.com>

update to 4.0.4

fix build when WITH_GDBM is specified

update to 4.0.3

re-enable WITH_DRAC (new patch made by Mamoru KOMACHI <usata@usata.org>)
bump PORTREVISION

chase courier-authlib move

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

update to 4.0.2
migrate to OPTIONS
add WITH_SYSLOG_FACILITY knob [1]

Submitted by:   Sascha Holzleiter <sascha@daemonground.de> [1]

Add WITHOUT_IPV6 knob

Submitted by:   "Gustavo A. Baratto" <gbaratto@superb.net>

- readd pam-configuration hints. [1]
- make portlint a bit happier

Noted by:       John O'Brien <boardom@gmail.com> [1]

upadate to courier-authlib 0.52, courier-imap 4.0.1 and sqwebmail 5.0.0

Special thanks for testing and sugestions to:   Brian Candler
<B.Candler@pobox.com>

adjust the message what to do, to get courier-imap working with pam on FreeBSD
>=5

use RCDIR instead of PREFIX/etc/rc.d
be quiet about not removeable directories (because they are still holding
custommized configuration files)

install rc.d scripts with correct modes

Submitted By:   Amir Shalem <amir@boom.org.il>

- update to 3.0.8
- new start scripts (rc.subr style) [1]

Sponsored by:   "Darren Pilgrim" <dmp@bitfreak.org> [1]

update to 3.0.7

drac patch got synced with the new courier-imap version
Bump PORTREVISION

Noted by:       Nate Silva <nate@northwe.st>

update to 3.0.6

Fix imapd's incorrectly calculation of maildir quotas due to missuse of
pointer to off_t (64bit) vs pointer to long (32 bit).
Bump PORTREVISION

PR:             68094
Submitted By:   Rui Lopes <rui@ruilopes.com>

Number of commits found XX: 177 (showing only 100 on this page)

1 | 2  »  

12 vulnerabilities affecting 113 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-01-14 20:39:03