| non port: mail/libvmime/Makefile |
|
SVNWeb
|
Number of commits found: 73 |
|
Thu, 13 Apr 2023
|
[ 00:56 Jan Beich (jbeich)  ]    f1f1a8b (Only the first 10 of 214 ports in this commit are shown above.  )
devel/icu: update to 73.1
- Temporarily switch to GitHub auto archive (release artifacts are N/A atm)
Changes: https://github.com/unicode-org/icu/releases/tag/release-73-1
Reported by: GitHub (watch releases)
PR: 270422
Exp-run by: antoine
|
|
Wed, 19 Oct 2022
|
[ 08:10 Jan Beich (jbeich) ] dfe25d7 (Only the first 10 of 208 ports in this commit are shown above. )
devel/icu: update to 72.1
Changes: https://github.com/unicode-org/icu/releases/tag/release-72-1
Reported by: GitHub (watch releases)
PR: 266582
Exp-run by: antoine
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] b587cc2 (Only the first 10 of 577 ports in this commit are shown above. )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 21 Jun 2022
|
[ 20:57 Po-Chuan Hsieh (sunpoet) ] b42e7a0 (Only the first 10 of 14 ports in this commit are shown above. )
security/libgsasl: Update to 2.0.0
- Bump PORTREVISION of dependent ports for shlib change
Changes: https://gitlab.com/gsasl/gsasl/-/blob/master/NEWS
|
|
Thu, 7 Apr 2022
|
[ 00:39 Jan Beich (jbeich) ] 268cee3 (Only the first 10 of 179 ports in this commit are shown above. )
devel/icu: update to 71.1
Changes: https://github.com/unicode-org/icu/releases/tag/release-71-1
Reported by: GitHub (watch releases)
PR: 262654
Exp-run by: antoine
Approved by: fluffy
|
|
Thu, 28 Oct 2021
|
[ 16:37 Jan Beich (jbeich) ] f34ece3 (Only the first 10 of 157 ports in this commit are shown above. )
devel/icu: update to 70.1
Changes: https://github.com/unicode-org/icu/releases/tag/release-70-1
Reported by: GitHub (watch releases)
PR: 258794
Exp-run by: antoine
|
|
Thu, 8 Apr 2021
|
[ 23:33 Jan Beich (jbeich) ] 69d24a7 (Only the first 10 of 145 ports in this commit are shown above. )
devel/icu: update to 69.1
Changes: https://github.com/unicode-org/icu/releases/tag/release-69-1
Reported by: GitHub (watch releases)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 3 Nov 2020
|
[ 00:56 jbeich ]   (Only the first 10 of 186 ports in this commit are shown above. )
devel/icu: update to 68.1
Changes: http://site.icu-project.org/download/68
ABI: https://abi-laboratory.pro/tracker/timeline/icu4c/
Reported by: GitHub (watch releases)
|
|
Fri, 2 Oct 2020
|
[ 13:17 sunpoet ]
Add ICU option
|
|
Fri, 24 Jul 2020
|
[ 18:59 sunpoet ]
Convert REINPLACE_CMD to patch file
|
|
Sun, 23 Feb 2020
|
[ 08:07 sunpoet ]
Update LIB_DEPENDS after splitting gsasl library into libgsasl
- Bump PORTREVISION for dependency change
|
|
Sun, 5 Jan 2020
|
[ 04:07 sunpoet ]
Sort PLIST
- Update pkg-descr
- Take maintainership
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Tue, 25 Dec 2018
|
[ 20:25 tcberner ] (Only the first 10 of 1277 ports in this commit are shown above. )
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Mon, 1 Jan 2018
|
[ 09:00 amdmi3 ]
- Pet portlint
- Fix LICENSE
- Update WWW
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Sun, 25 Jun 2017
|
[ 21:07 tcberner ] (Only the first 10 of 115 ports in this commit are shown above. )
Make ninja opt-out in cmake.mk
Using ninja instead of make (1) can lead to significant speed ups while
building.
Therefore switch from having the ninja generator opt-in to having it opt-out.
Previously cmake-ports that wanted to use ninja could set
CMAKE_NINJA=yes
now, ports that do not work with ninja can set
cmake:<existing args>,noninja
Note, that needing this should be an exception and most often points to a broken
cmake of the port.
The ports using cmake were modified
* removed USES=gmake, if ninja is used
* removed MAKE_ARGS, if ninja is used
* added the cmake-argument noninja if necessary
PR: 219629
PR: 213331
Exp-run by: antoine
Reviewed by: rakuco
Differential Revision: https://reviews.freebsd.org/D10748
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Sun, 26 Mar 2017
|
[ 11:37 antoine ]
libvmime stages fine with default INSTALL_TARGET
|
[ 10:42 brnrd ]
mail/libvmime: Update to v0.9.2
- Update from snapshot to release 0.9.2
- Work around missing install-strip target
- Update pkg-plist
- re-roll patch
- Fix compile error in posixSocket
PR: 216999
|
|
Sun, 26 Jun 2016
|
[ 19:13 delphij ]
Return this back to pool, I no longer use this library.
|
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 27 Mar 2016
|
[ 14:58 tijl ] (Only the first 10 of 183 ports in this commit are shown above. )
- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
supported by libgnutls-dane and gnutls-cli. Also clarify the option
description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4. Some ports used this library
in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed. Ports that used these have been
updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.
net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.
www/hydra: Mark BROKEN. This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.
PR: 207768
Exp-run by: antoine
Approved by: portmgr (antoine)
|
|
Thu, 7 May 2015
|
[ 16:32 mat ] (Only the first 10 of 109 ports in this commit are shown above. )
Update ports in the [i-m]* category to not use GH_COMMIT.
With minor cleanups to make things simpler.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 15 Apr 2015
|
[ 08:20 tijl ] (Only the first 10 of 152 ports in this commit are shown above. )
converters/libiconv:
- Remove const qualifier from iconv(3) to match POSIX:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html
- Patch iconv.h to expose more GNU extensions when LIBICONV_PLUG is
defined because the base system iconv supports these extensions too.
Add/remove patches to/from ports to call iconv with non-const arguments.
This breaks some ports on FreeBSD 10 because base system iconv.h still has
the const qualifier. Fix this by letting USES=iconv add a build dependency
on converters/libiconv so ports can use its iconv.h (with LIBICONV_PLUG
defined) instead of the base system iconv.h.
This exposed some ports that link with libiconv when it is available instead
of using libc iconv. In these cases one of the following changes has been (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Wed, 23 Jul 2014
|
[ 09:54 tijl ] (Only the first 10 of 139 ports in this commit are shown above. )
- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
developers)
PR: 191274
Exp-run by: antoine
Approved by: portmgr (antoine)
|
|
Mon, 7 Jul 2014
|
[ 15:31 olgeni ] (Only the first 10 of 193 ports in this commit are shown above. )
Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category M.
CR: D306
Approved by: portmgr (bapt)
|
|
Tue, 3 Jun 2014
|
[ 13:58 amdmi3 ]
- Convert security/gsasl to USES=libtool, drop .la files
- Bump revisions of dependent ports as gsasl .so version has changed
- Convert USE_BZIP2 and USE_XZ to USES in some ports
Approved by: portmgr blanket
|
[ 13:51 amdmi3 ]
- Convert USE_BZIP2 to USES
- Use new LIB_DEPENDS syntax
- Switch to USES=libtool, drop .la files
Approved by: portmgr blanket
|
|
Sat, 15 Feb 2014
|
[ 10:13 miwi ]
- Stage support
|
|
Fri, 20 Sep 2013
|
[ 19:59 bapt ] (Only the first 10 of 748 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)
|
|
Thu, 12 Sep 2013
|
[ 18:36 delphij ]
Fix a build.
|
|
Fri, 6 Sep 2013
|
[ 00:17 delphij ]
Fix build.
Per ISO C++03 14.2/4:
When the name of a member template specialization appears after . or ->
in a postfix-expression, or after nested-name-specifier in a qualified-id,
and the postfix-expression or qualified-id explicitly depends on a
template-parameter (14.6.2), the member template name must be prefixed by
the keyword template. Otherwise the name is assumed to name a non-template.
|
|
Mon, 2 Sep 2013
|
[ 19:55 bapt ] (Only the first 10 of 32 ports in this commit are shown above. )
Add an explicit dependency on pkgconf
|
|
Wed, 14 Aug 2013
|
[ 22:35 ak ] (Only the first 10 of 1725 ports in this commit are shown above. )
- Remove MAKE_JOBS_SAFE variable
Approved by: portmgr (bdrewery)
|
|
Sat, 27 Apr 2013
|
[ 11:59 mva ] (Only the first 10 of 219 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here
Reviewed by: zeising
|
|
Tue, 5 Feb 2013
|
[ 16:17 novel ] (Only the first 10 of 94 ports in this commit are shown above. )
- Add UPDATING entry for gnutls update
- Chase shlib version bump for dependant ports
|
|
Sun, 3 Jun 2012
|
[ 13:54 johans ]
Chase security/gsasl library update
|
|
Thu, 8 Mar 2012
|
[ 18:54 delphij ]
- Do not rely on specific gnutls nor gsasl version.
- Fix clang compilation.
Submitted by: Mel Flynn <rflynn acsalaska net>
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Sun, 5 Jun 2011
|
[ 18:43 novel ] (Only the first 10 of 95 ports in this commit are shown above. )
Chase security/gnutls update and add an UPDATING entry.
|
|
Tue, 3 May 2011
|
[ 18:47 delphij ]
Update to 0.9.1.
|
|
Fri, 25 Feb 2011
|
[ 14:08 johans ]
Chase security/gsasl update
|
|
Tue, 15 Dec 2009
|
[ 20:59 krion ]
Chase deps shlib version after updating security/gsasl
|
|
Tue, 8 Dec 2009
|
[ 17:59 delphij ]
- Fix a possible segfault in stringUtils::countASCIIchars()
- Fix body contents not generating bug caused by stream::reset() won't
reset EOF condition.
Obtained from: vmime svn
|
|
Sat, 22 Aug 2009
|
[ 00:28 amdmi3 ] (Only the first 10 of 287 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with M
|
|
Wed, 19 Aug 2009
|
[ 23:29 delphij ]
Chase for latest GNUtls's removal of libgnutls-config.
|
|
Sun, 16 Aug 2009
|
[ 18:04 novel ] (Only the first 10 of 65 ports in this commit are shown above. )
Bump PORTREVISIONs of the gnutls dependant ports to chase gnutls update.
|
|
Fri, 27 Mar 2009
|
[ 01:09 delphij ]
Mark MAKE_JOBS_SAFE wherever makes sense.
|
|
Fri, 6 Feb 2009
|
[ 07:24 krion ]
Chase libs for previous security/gsasl update.
|
|
Tue, 3 Feb 2009
|
[ 06:18 linimon ]
Mark as broken on sparc64: does not compile.
|
|
Mon, 24 Nov 2008
|
[ 06:46 delphij ]
Derive CXXFLAG from CFLAG explicitly. Without this, user supplied CXXFLAG
could cause compile fail due to the lack of -I${LOCALDIR}
Reported/tested by: Andrei V. Lavreniyuk <andy.lavr reactor-xg kiev.ua>
|
|
Sun, 16 Nov 2008
|
[ 21:49 delphij ]
Update to 0.9.0
|
|
Tue, 26 Aug 2008
|
[ 20:28 krion ]
- Update to version 0.2.28
- Bump sh lib version on depending ports
PR: ports/126857
Submitted by: mm@FreeBSD.org
|
|
Wed, 30 Jul 2008
|
[ 08:53 delphij ]
This port is not broken, it does not compile due to the corrupted header
installed by gnutls, which is now fixed.
|
|
Fri, 25 Jul 2008
|
[ 14:34 pav ] (Only the first 10 of 213 ports in this commit are shown above. )
- Remove USE_GCC where it can be satisfied with base compiler on following
FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT
|
|
Wed, 23 Jul 2008
|
[ 00:57 pav ]
- Mark BROKEN: does not compile with gnutls-2.4.x
|
|
Fri, 6 Jun 2008
|
[ 13:43 edwin ] (Only the first 10 of 159 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Mon, 3 Mar 2008
|
[ 11:57 novel ] (Only the first 10 of 51 ports in this commit are shown above. )
- Chase security/gnutls shlib version bump
- Add an entry to UPDATING
|
|
Mon, 18 Feb 2008
|
[ 00:10 delphij ]
- Define _GLIBCXX__PTHREADS as a workaround for our gcc's gthr.h,
which defines _GLIBCXX_GTHREAD_USE_WEAK and causes compilation
to fail for no good reason.
- Respect users' CFLAGS setting.
- Use MASTER_SITE=SF.
- Bump PORTREVISION.
|
|
Fri, 14 Dec 2007
|
[ 22:04 delphij ]
Now we have a usable gnutls version that can be used with libvmime,
so enable it in build.
|
|
Wed, 5 Sep 2007
|
[ 13:57 krion ]
Chase libver after security/gsasl update.
|
|
Fri, 1 Jun 2007
|
[ 08:24 krion ]
Chase increase of security/gsasl shlib version.
|
|
Fri, 5 Jan 2007
|
[ 02:25 delphij ]
Upate to 0.81
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Fri, 18 Nov 2005
|
[ 13:26 mnag ]
Update to 0.8.0
Add SHA256
PR: 89217
Submitted by: delphij (maintainer)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Tue, 20 Sep 2005
|
[ 12:18 mnag ]
New port
"libvmime is a MIME manipulation library."
PR: ports/86300
Submitted by: Xin LI <delphij@freebsd.org>
Approved by: pav (mentor)
|
Number of commits found: 73 |
As an Amazon Associate I earn from qualifying purchases.