Number of commits found XX: 70

Remove GeoIP-related options. Where possible, replace GeoIP 1 defaults
with GeoIP 2.

Also, as suggested by zi, add an UPDATING note about this.

- bump MILTER_SOVER to fix linking on FREEBSD-12
- bump PORTREVISION on ports using libmilter
- rename WITH_SENDMAIL_PORT to WITH_MILTER_PORT
- rename WITH_SENDMAIL_BASE to WITH_MILTER_BASE
- rename WITH_SENDMAIL_STATIC_MILTER to WITH_MILTER_STATIC
- cleanup ifdefs
- fix build on batv-filter with libmilter from ports

For ports in `mail' category: remove redundant PKGMESSAGE assignment,
which is set appropriately by the b.p.m when `pkg-message' appears on
the SUB_FILES list.

mail/milter-greylist: Add configtest command in rcfile

While here:
  Remove conflicts entry for milter-greylist-devel, port removed.
  Use macro @sample in config file.

PR:		222839
Submitted by:	Masachika ISHIZUKA <ish@amail.plala.or.jp>
Approved by:	m.tsatsenko@gmail.com (maintainer)

mail/milter-greylist: Bring in DKIM option from milter-greylist-devel

While here, make DKIM, SPF, GEOIP and CURL default like -devel

PR:		220256
Submitted by:	m.tsatsenko@gmail.com (maintainer)

Update to 4.6.2

PR:		215864
Submitted by:	maintainer

mail/milter-greylist: update 4.4.3 -> 4.6.1

PR:		213622
Submitted by:	Mikhail Tsatsenko <m.tsatsenko@gmail.com> (maintainer)

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

mail/milter-greylist: Fix options

- Remove DKIM option as it reportedly never worked
- Regenerate patches to appease portlint

PR:		207246
MFH:		2016Q1

- split libmilter from sendmail into a seperate port
- bump PORTREVISION
Submitted by:	matthew (Matthew Seaman)

- Add DKIM support
- Convert to Options helper

PR:		2028660
Submitted by:	maintainer
Approved by:	mat (mentor)
Differential Revision:	D4428

mail category: Remove $PTHREAD_LIBS

Note: The following ports did not pass check-plist (CP) or stage-qa (QA)
tests.   The sendmail port has many problems, but this was already known
by myself as I fixed it properly on DPorts last week.  It's a forward
action to submit a PR against mail/sendmail.

  * antivirus-milter (CP)
  * dk-milter        (CP)
  * milter-regex     (CP)
  * sendmail         (CP, QA)

approved by:	PTHREAD blanket

Simplify plist

mail/milter-greylist: minor fixes

- Use LIB_DEPS for curl, spf and geoip
- Use ${PORTSDIR} instead of {.CURDIR} for bsd.milter.mk location
- Do not bump PORTREVISION as all of curl, spf and geoip are disabled by defaul

PR:		193993
Submitted by:	Mikhail Tsatsenko <m.tsatsenko@gmail.com>
Approved by:	mentors (implicit)

mail/libspf2:
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

(Also some white space fixes in dependent ports)

Approved by:	portmgr (implicit, bump unstaged port)

mail/milter-greylist: Fix and simplify makefile

This port was conditionally installing manpages per option, which is
not allowed.  While fixing this, align it with the recently modernized
milter-greylist-devel port, which includes:

 * Remove assignment of BUILD_DEPENDS to RUN_DEPENDS (illegal).  The
   BUILD_DEPENDS is empty by default
 * Use options to set dependencies and configure arguments
 * Use PORTDOCS and PORTEXAMPLES
 * Wrap to 80 columns
 * Combine post-install target with do-install target
 * include local .mk with relative path instead of hardcoded PORTSDIR

PR:		192740
Submitted by:	Daniel Austin (per my request)
Approved by:	Just Fix It

Bump PORTREVISION on all ports that depend on net/GeoIP for
r364627.

Approved by:	portmgr (not really, but touches unstaged ports)

net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD

databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip

databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample

(Only the first 15 lines of the commit message are shown above )

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be

(Only the first 15 lines of the commit message are shown above )

- use STAGEDIR
- update LICENSE
- undo silent install
- robust INSTALL
PR:		188069

Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)

- Update to 4.4.3
- Add a site specified in milter-greylist-devel to MASTER_SITE.
- Add LICENSE.
- Appropriate configure option for the version of net-mgmt/p0f.
- Fix to be able to specify IPv6 address to syncsrcaddr.

PR:		ports/176950
Submitted by:	ume
Reviewed by:	Mikhail Tsatsenko <m.tsatsenko__at__gmail.com> (maintainer)
Approved by:	Mikhail Tsatsenko <m.tsatsenko__at__gmail.com> (maintainer)

Correct dumpfile location.

PR:		ports/177097
Submitted by:	John Marshall <john.marshall__at__riverwillow.com.au>
Reviewed by:	Mikhail Tsatsenko <m.tsatsenko__at__gmail.com> (maintainer)
Approved by:	Mikhail Tsatsenko <m.tsatsenko__at__gmail.com> (maintainer)

- Update the port to 4.4.1
- Convert to OptionsNG
- Use new Makefile header format

PR:		ports/176734
Submitted by:	"Mikhail T." <m.tsatsenko@gmail.com> (maintainer)

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Make  Mikhail Tsatsenko, m.tsatsenko at gmail.com, the new maintainer.

Remove myself from MAINTAINER

Update to 4.2.7

Upgrade to 4.2.6

Upgrade to 4.2.5

Run as group mailnull to assist postfix

Mention postfix in the COMMENT=

Add partial OPENLDAP support

Submitted by:   Gerhard Schmidt <estartu@augusta.de>

Add SENDMAIL_LDFLAGS and SENDMAIL_LDADD for sendmail case

Submitted by:   Gerhard Schmidt <estartu@augusta.de> (with small mod)

Upgrade to 4.2.3

Use on/off instead of YES/NO for OPTIONS

Use OPTIONS
add --with-postfix there

PR:             133783
Submitted by:   John Baldwin <jhb@FreeBSD.org>

Upgrade to 4.2.2

--with-curl -> --with-libcurl

Submitted by:   Roberto Grassi <r.grassi@obicon.it>

Bump the version of the curl shared library after the ftp/curl update
to 7.19.2.
Bump PORTREVISION, even on the ports that do not have a versioned
dependency, since the binaries will most probably still stop working.

- Bump PORTREVISION due to libspf2 update
- Change lib dependency

Upgrade to 4.0.1

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

Use sendmail/bsd.milter.mk to fix dependence for various sendmail port
options.

Submitted by:   Dirk Meyer <dirk.meyer@dinoex.sub.org>

- Respect NO_INSTALL_MANPAGES
- repocopy [files/milter-greylist.sh -> files/milter-greylist.in, pkg-message ->
files/pkg-message.in]
itectu@: no more .sh
- Bump PORTREVISION
- Broken messages are not quoted
- silence some portlint tab warnings
- seperate NOPORTDOCS from NOPORTEXAMPLES
- drop 5.x support
- use SUB_FILES for pkg-message processing
- make use of @dirrmtry in pkg-plist

PR:             125653
Submitted by:   "Philip M. Gollucci" <pgollucci@p6m7g8.com> (almost all)

Add WITH_CURL option

PR:             123180
Submitted by:   Michael Stowe <mstowe@chicago.us.mensa.org>

Upgrade to 4.0

Change BUILD_DEPENDS to LIB_DEPENDS for libspf2

Add --with-thread-safe-resolver for >= 502102

Submitted by:   ume

Assign myself as MAINTAINER

Upgrade to 3.0

Reset MAINTAINER - address is no longer available

Update to 2.0.2

PR:             88409
Submitted by:   Cyril Guibourg <aragorn+ports@babasse.net> (maintainer)

- Add option to use sendmail from base/ports
- Add option to use libspf2

PR:             ports/85795
Submitted by:   Cyril Guibourg <aragorn@babasse.net> (maintainer)

- Update to 2.0

PR:             ports/82906
Submitted by:   Cyril Guibourg <aragorn+ports@teaser.fr> (maintainer)

- Fix rcNG script.

PR:             ports/82259
Submitted by:   Andrew McNaughton <andrew@scoop.co.nz>
Approved by:    maintainer

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Use PTHREADS_{LIBS,CFLAGS} instead of Makefile.in patch

Approved by:    aragorn+ports@teaser.fr

add CONFLICTS against milter-greylist-devel.

[MAINTAINER] mail/milter-greylist: update to 1.6

        - Update to 1.6

        Added file(s):
        - files/patch-greylist.conf
        - files/patch-milter-greylist.c

PR:             ports/75101
Submitted by:   Cyril Guibourg <aragorn+ports@teaser.fr>

Update to 1.5.6

PR:             ports/70260
Submitted by:   Cyril Guibourg (maintainer)

- Update rc script to conform latest localpkg changes

PR:             ports/69698
Submitted by:   Cyril Guibourg <aragorn+ports@teaser.fr> (maintainer)

- Update to 1.5.3

PR:             ports/68427
Submitted by:   Cyril Guibourg <aragorn+ports@teaser.fr> (maintainer)

Create missing directory to fix build.

Noticed by: cluster via kris

Update to 1.4

PR:             ports/67908
Submitted by:   maintainer

Update to 1.3.8

PR:             ports/67661
Submitted by:   maintainer

- Fix crash upon configuration reload

PR:             ports/67419
Submitted by:   Cyril Guibourg <aragorn+ports@teaser.fr> (maintainer)
Obtained from:  author

Add milter-greylist, a milter for sendmail written in C that implements
grey listing. Grey listing is a spam filtering technique, which uses a behavior
trick: spammers never resend a message when they get a temporary error,
whereas real MTA do. The idea is to refuse any mail on first attempt, and
accept it after some time has elapsed.

PR:             ports/67252
Submitted by:   Cyril Guibourg <aragorn+ports@teaser.fr>

Number of commits found XX: 70

16 vulnerabilities affecting 89 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2020-05-31 11:54:41