| non port: mail/spamdyke/Makefile |
|
SVNWeb
|
Number of commits found: 43 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] b587cc2 (Only the first 10 of 577 ports in this commit are shown above. )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net> (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 4 Jun 2021
|
[ 05:53 Gerald Pfeifer (gerald) ] d09ed09 (Only the first 10 of 52 ports in this commit are shown above. )
*/*: Replace USE_GCC=any with USE_GCC=yes
USE_GCC=any has been equivalent to USE_GCC=yes in most cases (such
as i386 and amd64 since 12.x and depending on configuration 11.x,
most newer installations on other platforms, and 13.x across the
board).
Since commit 96c17633d90386b5bcf8 Mk/bsd.gcc.mk is treating them as
different spellings of the same, so continue the deorbiting of the
USE_GCC=any form and simply replace it with USE_GCC=yes.
This should not make any functional difference at all.
Discussed with: mat, linimon, pkubaj
|
|
Tue, 27 Apr 2021
|
[ 14:21 Dmitry Marakasov (amdmi3) ] a24f0d2
mail/spamdyke: extend BROKENness to FreeBSD 14
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ]   (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Wed, 3 Apr 2019
|
[ 14:09 antoine ]
Mark BROKEN on FreeBSD 12 and 13
Reported by: pkg-fallout
MFH: 2019Q2
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Mon, 2 Jul 2018
|
[ 04:00 linimon ] (Only the first 10 of 60 ports in this commit are shown above. )
Mark ports broken on mips64 that are already broken on powerpc64. In
most cases, the failure mode is the same. Also, mark them broken on
mips when necessary.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
|
|
Sat, 10 Mar 2018
|
[ 17:46 gerald ] (Only the first 10 of 1104 ports in this commit are shown above. )
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Sun, 30 Apr 2017
|
[ 01:12 linimon ] (Only the first 10 of 21 ports in this commit are shown above. )
Provide more descriptive error messages for ports failing on powerpc64.
Approved by: portmgr (tier-2 blanket)
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Sun, 20 Nov 2016
|
[ 09:38 gerald ] (Only the first 10 of 364 ports in this commit are shown above. )
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
|
[ 03:55 marino ]
mail/spamdyke: Fix OPENSSL configuration, cleanup
After fixing a configure phase failure to find openssl headers,
fix alignment, remove excess blank lines and pet portlint.
|
|
Thu, 21 Apr 2016
|
[ 16:43 swills ] (Only the first 10 of 419 ports in this commit are shown above. )
many ports: mark broken on powerpc64
|
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 24 Sep 2015
|
[ 21:19 amdmi3 ]
- Switch to options helpers
- Switch to @sample
Approved by: portmgr blanket
|
|
Thu, 21 May 2015
|
[ 22:44 bdrewery ]
- Update to 5.0.1
- Release maintainership
|
|
Sat, 18 Apr 2015
|
[ 10:48 amdmi3 ]
- Add CPE info
Approved by: portmgr blanket
|
|
Thu, 15 Jan 2015
|
[ 09:05 tijl ] (Only the first 10 of 102 ports in this commit are shown above. )
Add missing USE_OPENSSL=yes
PR: 195796
|
|
Tue, 29 Jul 2014
|
[ 19:11 adamw ] (Only the first 10 of 436 ports in this commit are shown above. )
Convert a bunch of EXTRACT_SUFX=... into USES=tar:...
Approved by: portmgr (not really, but touches unstaged ports)
|
|
Sun, 9 Feb 2014
|
[ 02:17 bdrewery ]
- Update to 5.0.0
- Support STAGEDIR
Changelog:
http://www.spamdyke.org/documentation/Changelog.txt
Upgrade guide from 4.x:
http://www.spamdyke.org/documentation/UPGRADING_version_4_to_version_5.txt
|
|
Fri, 20 Sep 2013
|
[ 15:58 bdrewery ] (Only the first 10 of 37 ports in this commit are shown above. )
- Add NO_STAGE until validated to be safe for upcoming staging support
|
|
Fri, 5 Jul 2013
|
[ 12:46 bdrewery ]
Add LICENSE
|
|
Fri, 14 Jun 2013
|
[ 21:40 bdrewery ]
- Use new options helpers
- Add missing DEBUG_EXCESSIVE_DESC
|
|
Sun, 17 Mar 2013
|
[ 16:08 bdrewery ]
- Take maintainership
- Allow to build when CC=clang by using USE_GCC=any
- Remove indefinite article from COMMENT
- Remove use of bsd.port.pre.mk
|
|
Fri, 15 Mar 2013
|
[ 22:03 bdrewery ] (Only the first 10 of 35 ports in this commit are shown above. )
- Convert USE_QMAIL_RUN, USE_QMAIL_BUILD and WANT_QMAIL into USES feature
bapt contributed to the qmail.mk as well
- Trim headers
USES= qmail:run will add qmail into RUN_DEPENDS
USES= qmail:build will add qmail into BUILD_DEPENDS
USES= qmail[:both] will add qmail into both RUN and BUILD DEPENDS
USES= qmail:vars will set QMAIL_PREFIX
With hat: portmgr
|
|
Wed, 13 Jun 2012
|
[ 05:55 bapt ] (Only the first 10 of 16 ports in this commit are shown above. )
Convert to new options framework
|
|
Mon, 23 Jan 2012
|
[ 21:27 wxs ]
- Update to 4.3.1
Security: 7d2336c2-4607-11e1-9f47-00e0815b8da8
|
|
Tue, 10 Jan 2012
|
[ 02:54 wxs ]
Set IGNORE if building with clang. This port uses nested functions which
are a gcc extension and not supported by clang yet (if ever).
|
|
Mon, 9 Jan 2012
|
[ 02:27 wxs ]
Update to 4.2.1.
Security: a47af810-3a17-11e1-a1be-00e0815b8da8
|
|
Thu, 14 Jul 2011
|
[ 16:23 arved ]
Update to 4.2.0
PR: 158901
Submitted by: Jin-Sih Lin <linpct@gmail.com>
|
|
Tue, 19 Oct 2010
|
[ 00:13 wxs ]
Update to 4.1.0.
Handle the config files properly.
|
|
Mon, 18 Oct 2010
|
[ 14:33 wxs ]
Reset maintainer at his request.
Submitted by: maintainer on ports@
|
|
Wed, 7 Jan 2009
|
[ 03:58 wxs ]
- Update to 4.0.10
PR: ports/130241
Submitted by: Peter Kieser <peter@kieser.ca> (maintainer)
|
|
Sat, 18 Oct 2008
|
[ 20:52 miwi ]
- Update to 4.0.5
PR: 128126
Submitted by: Peter Kieser <peter@kieser.ca> (maintainer)
|
|
Wed, 24 Sep 2008
|
[ 09:08 miwi ]
- Update to 4.0.4
PR: 127473
Submitted by: Peter Kieser <peter@kieser.ca> (maintainer)
|
|
Tue, 12 Aug 2008
|
[ 00:02 wxs ]
- Update to 4.0.2
- Add two new DEBUG options
- Mark as BROKEN on older gcc (maintainer is working on a patch upstream)
PR: ports/126407
Submitted by: Peter Kieser <peter@kieser.ca> (maintainer)
|
|
Tue, 27 May 2008
|
[ 13:07 wxs ]
Update to 3.1.8 - Fix open relay vulnerability.
PR: ports/124013
Submitted by: Peter Kieser <peter@kieser.ca> (maintainer)
Approved by: garga (mentor, implicit)
|
|
Thu, 17 Apr 2008
|
[ 14:30 wxs ]
Update to version 3.1.7.
PR: ports/122537
Submitted by: Peter Kieser <peter@kieser.ca> (maintainer)
Approved by: garga (mentor)
|
|
Sat, 22 Mar 2008
|
[ 11:59 wxs ]
spamdyke is a filter for monitoring and intercepting SMTP
connections between a remote host and a qmail server. Spam
is blocked while the remote server (spammer) is still
connected; no additional processing or storage is needed.
In addition to all of its anti-spam filters, spamdyke also
includes a number of features to enhance qmail.
Best of all, using spamdyke does not require patching or
recompiling qmail!
PR: ports/119579
Submitted by: Peter Kieser <peter@kieser.ca>
Approved by: garga (mentor)
|
Number of commits found: 43 |
As an Amazon Associate I earn from qualifying purchases.