non port: mail/squirrelmail-spam-buttons-plugin/Makefile |
SVNWeb
|
Number of commits found: 18 |
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] b587cc2 (Only the first 10 of 577 ports in this commit are shown above. )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Mon, 27 Feb 2017
|
[ 21:20 rene ] (Only the first 10 of 19 ports in this commit are shown above. )
Reset ports of itetcu@ after taking in his commit bit for safekeeping.
With hat: portmgr-secretary
|
Thu, 28 Aug 2014
|
[ 15:16 adamw ] (Only the first 10 of 31 ports in this commit are shown above. )
Move plugin installation into the plist, rather than post-install, so
that it will work when installed from binary pkg.
Bump PORTREVISION on all plugins for this.
|
Fri, 4 Jul 2014
|
[ 00:33 adamw ] (Only the first 10 of 19 ports in this commit are shown above. )
Remove NOPORTDOCS and NOPORTEXAMPLES.
|
Tue, 18 Feb 2014
|
[ 12:40 miwi ] (Only the first 10 of 33 ports in this commit are shown above. )
- Stage support
- While here cleanup some whitespaces / dependencys
|
Thu, 12 Dec 2013
|
[ 01:32 adamw ] (Only the first 10 of 32 ports in this commit are shown above. )
It turns out that letting bsd.squirrelmail.mk define CATEGORIES
broke PKGORIGIN, which is created in bsd.port.pre.mk. Oops.
So, I've added CATEGORIES back to all the plugins, and bumped
PORTREVISION so that packages with correct origins can be
created.
Thanks to: Stefan Bethke <stb@lassitu.de>
|
Sun, 8 Dec 2013
|
[ 18:59 adamw ] (Only the first 10 of 53 ports in this commit are shown above. )
Create a generic PKGMESSAGE, and use it where appropriate.
Make sure that bsd.port.pre.mk is included before bsd.squirrelmail.mk.
For ports with maintainers, I haven't switched you to the new
PKGMESSAGE, but I have corrected paths in pkg-message.in where
necessary. I also got a little over-zealous in cleaning redundant
definitions from the headers. Apologies in advance if this rubs
you the wrong way.
|
Fri, 20 Sep 2013
|
[ 19:59 bapt ] (Only the first 10 of 748 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)
|
Wed, 4 Sep 2013
|
[ 06:06 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
Approved by: portmgr (bapt@, blanket)
|
Thu, 27 Jun 2013
|
[ 06:48 bapt ] (Only the first 10 of 25 ports in this commit are shown above. )
CATEGORIES is defined in bsd.squirrelmail.mk which is always loaded after .mk
inclusion leading to PKGORIGIN not being set when needed.
Nothing requires bsd.squirrelmail to be loaded after bsd.port.pre.mk but the
PORTDIR.
Convert "${PORTDIR}/mail" to ${.CURDIR}/.. and remove all the pre.mk/post.mk
dancine
Reported by: erwin
|
Sat, 22 May 2010
|
[ 19:25 itetcu ]
Upate to 2.3.1. Changes:
- Updated for compatibility with SquirrelMail 1.4.18
- Added check for patch in configtest for SquirrelMail versions that require it
- Added some documentation about error that occurs when Compatibility plugin is
missing
- Correctly handle plural forms of success message for custom reporting
mechanism with ngettext
- Minor fix to accomodate Dovecot issue with UIDs that can be bigger than
normal integer values
Obey NOPORTDOCS; but not DOCSDIR, it doesn't make much sense in this case.
Poked by: portscout
|
Tue, 10 Nov 2009
|
[ 19:23 tabthorpe ] (Only the first 10 of 11 ports in this commit are shown above. )
- Use USE_PERL5_RUN instead of USE_PERL5_BUILD
- Move perl dependency before <bsd.port.pre.mk>
- Adopt mail/squirrelmail-login_notes-plugin while I am here
- There is no bump as the same functionality is maintained
Requested by: linimon
Approved by: portmgr (linimon)
|
Wed, 11 Feb 2009
|
[ 18:56 itetcu ]
Update to 2.2:
Requires: SquirrelMail 1.4.0+, Compatibility 2.0.7+
Description:
- Added ability to add any number of extra custom buttons/links, such as
whitelist or blacklist, etc. See configuration file for details
- Added new report method: custom PHP callback - sample implementation is
included, but is ultimately your reponsibility
- Fixed possible PHP notices caused by unmigrated prefs (v2.0->v2.1+)
- Fine-tuned some internal logic for when buttons are shown or not
- Slightly better, more efficient header inspection
- Fix bug in report-by-email-attachment functionality for 1.4.14+ and 1.5.2+
- Added ability to decide if spam reports sent as email attachments should be
stored in user's sent folder or not
- Added ability to store configuration file in main SquirrelMail config
directory (must be named "config_spam_buttons.php") (if you want this you
must do it by hand, the port doens't install it there).
Use bsd.squirrelmail.mk.
Prompted by: portscout (via miwi@)
|
Fri, 6 Jun 2008
|
[ 13:43 edwin ] (Only the first 10 of 159 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Sat, 16 Feb 2008
|
[ 23:42 itetcu ]
Fix plugin name in pkg-message.
|
[ 23:06 itetcu ]
Remove wrong comment.
|
[ 22:48 itetcu ]
Add squirrelmail-spam-buttons-plugin 2.1 which provides buttons with
customizable action (for reporting spam, etc.).
|
Number of commits found: 18 |