non port: mail/squirrelmail-vlogin-plugin/Makefile |
SVNWeb
|
Number of commits found: 29 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] b587cc2 (Only the first 10 of 577 ports in this commit are shown above. )
mail: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ashish@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam David <adam@FreeBSD.org>
* Adam McDougall <mcdouga9@egr.msu.edu>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alex Deiter <tiamat@komi.mts.ru>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alex Perel <veers@disturbed.net> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Fri, 21 Oct 2016
|
[ 12:51 mat ] (Only the first 10 of 718 ports in this commit are shown above. )
${RM} already has -f.
PR: 213570
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
|
Thu, 28 Aug 2014
|
[ 15:16 adamw ] (Only the first 10 of 31 ports in this commit are shown above. )
Move plugin installation into the plist, rather than post-install, so
that it will work when installed from binary pkg.
Bump PORTREVISION on all plugins for this.
|
Wed, 6 Aug 2014
|
[ 14:13 marino ]
mail/squirrelmail-avelsieve-plugin: reset maintainer per request
While here, remove unnecessary <pre> inclusion
PR: 192435
Submitted by: maintainer (Neil Darlow)
Reset reason: No longer uses squirrelmail thus can't test it
Thanks for looking after this one, Neil!
|
Fri, 4 Jul 2014
|
[ 00:33 adamw ] (Only the first 10 of 19 ports in this commit are shown above. )
Remove NOPORTDOCS and NOPORTEXAMPLES.
|
Fri, 6 Jun 2014
|
[ 21:33 antoine ]
Do not include bsd.port.pre.mk twice
|
Tue, 18 Feb 2014
|
[ 12:40 miwi ] (Only the first 10 of 33 ports in this commit are shown above. )
- Stage support
- While here cleanup some whitespaces / dependencys
|
Thu, 12 Dec 2013
|
[ 01:32 adamw ] (Only the first 10 of 32 ports in this commit are shown above. )
It turns out that letting bsd.squirrelmail.mk define CATEGORIES
broke PKGORIGIN, which is created in bsd.port.pre.mk. Oops.
So, I've added CATEGORIES back to all the plugins, and bumped
PORTREVISION so that packages with correct origins can be
created.
Thanks to: Stefan Bethke <stb@lassitu.de>
|
Sun, 8 Dec 2013
|
[ 18:59 adamw ] (Only the first 10 of 53 ports in this commit are shown above. )
Create a generic PKGMESSAGE, and use it where appropriate.
Make sure that bsd.port.pre.mk is included before bsd.squirrelmail.mk.
For ports with maintainers, I haven't switched you to the new
PKGMESSAGE, but I have corrected paths in pkg-message.in where
necessary. I also got a little over-zealous in cleaning redundant
definitions from the headers. Apologies in advance if this rubs
you the wrong way.
|
Fri, 20 Sep 2013
|
[ 19:59 bapt ] (Only the first 10 of 748 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
mail)
|
Wed, 4 Sep 2013
|
[ 12:28 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
Approved by: portmgr (bapt@, blanket)
|
Thu, 27 Jun 2013
|
[ 06:48 bapt ] (Only the first 10 of 25 ports in this commit are shown above. )
CATEGORIES is defined in bsd.squirrelmail.mk which is always loaded after .mk
inclusion leading to PKGORIGIN not being set when needed.
Nothing requires bsd.squirrelmail to be loaded after bsd.port.pre.mk but the
PORTDIR.
Convert "${PORTDIR}/mail" to ${.CURDIR}/.. and remove all the pre.mk/post.mk
dancine
Reported by: erwin
|
Sat, 16 Jan 2010
|
[ 15:20 tabthorpe ]
- Update to 3.10.2
PR: ports/142829
Submitted by: Neil Darlow <neil darlow.co.uk> (maintainer)
|
Tue, 10 Nov 2009
|
[ 19:23 tabthorpe ] (Only the first 10 of 11 ports in this commit are shown above. )
- Use USE_PERL5_RUN instead of USE_PERL5_BUILD
- Move perl dependency before <bsd.port.pre.mk>
- Adopt mail/squirrelmail-login_notes-plugin while I am here
- There is no bump as the same functionality is maintained
Requested by: linimon
Approved by: portmgr (linimon)
|
Sun, 18 Jan 2009
|
[ 03:19 tabthorpe ]
- Update to 3.10.1
- Implement bsd.squirrelmail.mk common include
PR: ports/130544
Submitted by: Neil Darlow <neil darlow.co.uk> (maintainer)
|
Fri, 6 Jun 2008
|
[ 13:43 edwin ] (Only the first 10 of 159 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Tue, 13 Mar 2007
|
[ 08:23 miwi ]
- Update to 3.9.2
- Use of PKGNAMEPREFIX/PORTNAME/PKGNAMESUFFIX to identify the port (new sqm
layout)
- Substitution of SQUIRREL_PLUGIN_NAME into pkg-plist to prevent future
cut-and-paste errors
- Use of bsd.port.pre.mk and bsd.port.post.mk to fix automatic plugin
registration
PR: 110161
Submitted by: Neil Darlow <neil@darlow.co.uk> (maintainer)
|
Thu, 25 Jan 2007
|
[ 22:58 miwi ]
- Add missing RUN_DEPENDS with squirrelmail-compatibility-plugin
- Bump PORTREVISION
PR: 108352
Submitted by: Neil Darlow <neil@darlow.co.uk> (maintainer)
|
Tue, 23 Jan 2007
|
[ 16:16 miwi ]
- Update to 3.9.1
- Portlint makeup
PR: ports/108221
Submitted by: Neil Darlow <neil@darlow.co.uk> (maintainer)
|
Tue, 21 Nov 2006
|
[ 19:43 miwi ]
- Updae to 3.9.0
PR: ports/105711
Submitted by: Neil Darlow (maintainer)
|
Sun, 19 Nov 2006
|
[ 15:42 erwin ]
Transfer maintainership to Neil Darlow
Approved by: Matt Emmerton <matt@gsicomp.on.ca> (old maintainer)
|
Mon, 25 Sep 2006
|
[ 03:27 rafan ]
- Only to activate the plugin when squirrel mail is installed, i.e.,
config.php exists.
This fixes package building.
Reported by: pointyhat via kris
Submitted by: Neil Darlow <neil at darlow.co.uk>
Approved by: Matt Emmerton <matt at gsicomp.on.ca> (maintainer)
|
Mon, 18 Sep 2006
|
[ 07:22 rafan ]
- Really unbreak it
PR: ports/103339
Submitted by: Neil Darlow <neil at darlow.co.uk>
Approved by: Matt Emmerton <matt at gsicomp.on.ca> (maintainer, implicit)
|
Sun, 17 Sep 2006
|
[ 01:27 kris ]
BROKEN: Incomplete pkg-plist
|
Sat, 5 Aug 2006
|
[ 08:00 miwi ]
- Update to 3.8.0
- Unbreak
PR: ports/100930
Submitted by: Neil Darlow <neil(at)darlow.co.uk>
Approved by: krion (mentor), maintainer
|
Sat, 15 Jul 2006
|
[ 20:34 linimon ]
Mark broken: leaves files behind on deinstall.
|
Mon, 21 Nov 2005
|
[ 15:09 pav ]
This plugin for SquirrelMail allows a single installation support multiple
domains, via per-domain (and per-user) configurations.
PR: ports/87860
Submitted by: Matt Emmerton <matt@gsicomp.on.ca>
|
Number of commits found: 29 |