| non port: math/asymptote/Makefile |
|
SVNWeb
|
Number of commits found: 147 (showing only 100 on this page) |
|
Tue, 25 Apr 2023
|
[ 15:17 Christian Weisgerber (naddy)  ]    feb1fa3 (Only the first 10 of 1613 ports in this commit are shown above.  )
audio/opus: bump consumers after update to 1.4
|
|
Thu, 9 Mar 2023
|
[ 11:15 Loïc Bartoletti (lbartoletti) ] 6d3a647 (Only the first 10 of 74 ports in this commit are shown above. )
PyQt: Update to latest versions
- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7
PR: 269751
Exp-run by: antoine
|
|
Mon, 19 Dec 2022
|
[ 14:44 Muhammad Moinur Rahman (bofh) ] 721e577 (Only the first 10 of 130 ports in this commit are shown above. )
Mk/**tex.mk: Convert bsd.tex.mk to USES=tex
- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
infrastructure and also in the ports which have been removed from the
ports as those are redundant.
In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.
Reviewed by: portmgr
Approved by: portmgr (blanket)
|
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias) ] ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above. )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 12 Aug 2022
|
[ 14:46 Dima Panov (fluffy) ] 4cf39de (Only the first 10 of 722 ports in this commit are shown above. )
*/*: bump all consumers after recent boost upgrade
|
|
Fri, 5 Aug 2022
|
[ 05:38 Yuri Victorovich (yuri) ] 17c993f
math/asymptote: Broken on 12/i386
Reported by: fallout
|
|
Wed, 27 Jul 2022
|
[ 18:35 Yuri Victorovich (yuri) ] 4ec705d
math/asymptote: Unbreak; Update 2.80 -> 2.81
There were 2 breaking problems:
* missing 'gc.h': backport the upstream patch to fix it
* Boost issues: disabled the module lsp that had these issues.
Had to update version because lsp wasn't disableable previously.
Approved by: portmgr (unbreak)
|
|
Thu, 21 Jul 2022
|
[ 20:49 Dmitry Marakasov (amdmi3) ] a8680c8
math/asymptote: mark BROKEN
Approved by: portmgr blanket
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] f53eb28 (Only the first 10 of 719 ports in this commit are shown above. )
math: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Alessando Sagratini <ale_sagra@hotmail.com>
* Alex Dupre <ale@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Amarendra Godbole <amarendra.godbole@gmail.com>
* Anders Nordby <anders@FreeBSD.org>
* Andreas Fehlner (fehlner@gmx.de)
* Andrew L. Neporada <andrew@chg.ru>
* Andrey <gugu@zoo.rambler.ru>
* Andrey Zakhvatov (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 22 May 2022
|
[ 20:17 Dima Panov (fluffy) ] b082b3d (Only the first 10 of 280 ports in this commit are shown above. )
devel/boost-all: bump all library consumers after boost upgrade
PR: 246106
|
|
Fri, 6 May 2022
|
[ 19:21 Nicola Vitale (nivit) ] 4a26726
math/asymptote: update to 2.80
|
|
Mon, 7 Mar 2022
|
[ 17:39 Loïc Bartoletti (lbartoletti) ] 2d8f8573 (Only the first 10 of 75 ports in this commit are shown above. )
devel/py-qt5, devel/py-sip: Update versions
- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)
PR: 261685
Exp-run by: antoine
|
|
Thu, 27 Jan 2022
|
[ 06:12 Loïc Bartoletti (lbartoletti) ] 4f0a5e1 (Only the first 10 of 205 ports in this commit are shown above. )
PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.
SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.
PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.
This allows us to be in adequacy with the packages that the author of these (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 12 Jan 2022
|
[ 19:41 Tobias C. Berner (tcberner) ] 654acd8 (Only the first 10 of 66 ports in this commit are shown above. )
math/gsl: bump portrevision of consumers after update to 2.7.1
PR: 260201
|
|
Tue, 22 Jun 2021
|
[ 18:53 Kevin Bowling (kbowling) ] da3162c (Only the first 10 of 914 ports in this commit are shown above. )
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
|
|
Wed, 16 Jun 2021
|
[ 19:31 Tobias C. Berner (tcberner) ] 63e653a (Only the first 10 of 66 ports in this commit are shown above. )
math/gsl: update to 2.7
From [1]
* What is new in gsl-2.7:
* fixed doc bug for gsl_histogram_min_bin (lhcsky at 163.com)
* fixed bug #60335 (spmatrix test failure, J. Lamb)
* fixed bug #36577
* clarified documentation on interpolation accelerators (V. Krishnan)
* fixed bug #45521 (erroneous GSL_ERROR_NULL in ode-initval2, thanks to M.
Sitte)
* fixed doc bug #59758
* fixed bug #58202 (rstat median for n=5)
* added support for native C complex number types in gsl_complex
when using a C11 compiler
* upgraded to autoconf 2.71, automake 1.16.3, libtool 2.4.6 (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 15 May 2021
|
[ 07:14 Tobias Kortkamp (tobik) Author: Yasuhiro Kimura ] 9671981 (Only the first 10 of 40 ports in this commit are shown above. )
*: Remove unnecessary 'port' argument from USES=readline
PR: 248459
Exp-run by: antoine
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 16 Mar 2021
|
[ 09:29 lbartoletti ]   (Only the first 10 of 57 ports in this commit are shown above. )
PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1
PR: 254218
Exp-run by: antoine
|
|
Mon, 8 Mar 2021
|
[ 06:49 lbartoletti ] (Only the first 10 of 100 ports in this commit are shown above. )
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
|
|
Tue, 15 Dec 2020
|
[ 17:56 lbartoletti ] (Only the first 10 of 54 ports in this commit are shown above. )
Update PyQt5 to 5.15.2, sip to 5.5.0, py-qtbuilder to 1.6.0 and py-qt5-sip to
12.8.1
PR: 251764
Exp-run by: antoine
|
|
Tue, 8 Dec 2020
|
[ 20:03 lbartoletti ] (Only the first 10 of 136 ports in this commit are shown above. )
Update Qt/PySide2 to 5.15.2 / PyQt to 5.15.1 / SIP to 5.4.0
This commit combines several updates.
- Update Qt to 5.12.2
- Update PyQt to 5.15.1
- Since PySide 5.15.1 is broken with Qt 5.15.2, so PySide and Shiboken are also
updated to 5.15.2.
- Update sip to 5.4.0
SIP is a collection of tools to create Python bindings for C and C++ libraries
and used by PyQt and wxPython. There are some changes with sip5 [1]:
- python 3.5+ is required
- sip drops support of old deprecated methods as sipdistutils & cie.
- this version breaks also PyQt5 extension ABI. SIP files will be installed in
${PYTHON_SITELIBDIR}/PyQt${_PYQT_VERSION}/bindings
- some ports will use the new pyqtbuilder package with the pyproject.toml setup.
Instead if the project have a setup.py, you should use sip-build to build it.
- if a port needs sip, it should also needs pysip. BTW, py-qt5-core requires
pysip, so that should be enough for PyQt packages.
(Only the first 15 lines of the commit message are shown above )
|
|
Mon, 9 Nov 2020
|
[ 17:08 tcberner ] (Only the first 10 of 114 ports in this commit are shown above. )
Prefer graphics/ligvrsvg2-rust over graphics/librsvg2
- switch to the more modern version of librsvg2 on architectures
supporting rust
- this will fix some graphical issues on these architectures
PR: 250276
Exp-run by: antoine
Submitted by: tobik
Differential Revision: https://reviews.freebsd.org/D18878
|
|
Sun, 27 Sep 2020
|
[ 13:54 nivit ]
- Update to 2.67
- Enable test target
|
|
Tue, 7 Jul 2020
|
[ 12:27 tobik ] (Only the first 10 of 18 ports in this commit are shown above. )
Clean up some things
Reported by: portscan and common sense
|
|
Tue, 24 Mar 2020
|
[ 19:54 antoine ] (Only the first 10 of 87 ports in this commit are shown above. )
Convert the tree to use PY_PILLOW
With hat: portmgr
Originally submitted by: kai
|
|
Mon, 24 Feb 2020
|
[ 11:36 kai ] (Only the first 10 of 76 ports in this commit are shown above. )
graphics/py-pillow: Update to 7.0.0
* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
dropped the support for Python 2.
* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
consumers that can be built for Python 2 or newer.
* Exceptions are ports that can be built only for either Python 2 or
Python 3. For the first case, consumers are just assigned to the
repo-copied graphics/py-pillow6.
* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
listed in setup.py as a build dependency [1] and relax the version (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 25 Oct 2019
|
[ 23:41 tcberner ] (Only the first 10 of 64 ports in this commit are shown above. )
math/gsl: update to 2.6
- math/p5-Math-GSL does not seem to have any upstream activity to make it work
with this version -> mark it broken
- this also breaks the two consumers of this port
- biology/gemma: has a conflict with cblas, and is makred broken.
PR: 241363
Exp-run by: antoine
|
|
Tue, 8 Oct 2019
|
[ 09:18 nivit ]
- Fix pkg-plist
- Bump PORTREVISION
|
|
Mon, 7 Oct 2019
|
[ 08:40 nivit ]
- Update to 2.56
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Tue, 9 Apr 2019
|
[ 14:04 sunpoet ] (Only the first 10 of 289 ports in this commit are shown above. )
Update devel/readline to 8.0
- Bump PORTREVISION of dependent ports for shlib change
Changes: https://tiswww.case.edu/php/chet/readline/CHANGES
PR: 236156
Exp-run by: antoine
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sat, 10 Nov 2018
|
[ 19:57 kwm ] (Only the first 10 of 157 ports in this commit are shown above. )
Update ImageMagick to 6.9.10.14 [1]
* Add PKGNAMESUFFIX and rename the directory. This was done to show
that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.
Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.
Chase these changes in all the ports that using IM6.
PR: 225102 (based on, only the version update) [1]
Submitted by: Pascal Christen <pascal.christen@hostpoint.ch>
|
[ 18:12 bapt ] (Only the first 10 of 386 ports in this commit are shown above. )
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
|
|
Fri, 31 Aug 2018
|
[ 18:27 fernape ] (Only the first 10 of 26 ports in this commit are shown above. )
devel/boehm-gc: update to 7.6.8
ChangeLog: https://github.com/ivmai/bdwgc/releases/tag/v7.6.8
* Giving maintainership to yasu@utahime.org
* Bumping PORTREVISION for dependent ports
PR: 230577
Submitted by: yasu@utahime.org
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D16704
|
|
Fri, 29 Jun 2018
|
[ 18:09 cpm ]
math/asymptote: add pkg-message for asymptote's rendering issue in 3D
Asymptote with enabled hardware acceleration produces incorrect rendered
figures in 3D. It is proven that asy has problems with the xf86-video-intel
driver.
To successfully process 3D figures or examples, it is necessary to always
use software rendering.
% env LIBGL_ALWAYS_SOFTWARE=1 asy sample.asy
PR: 229043
Submitted by: cpm
Approved by: nivit (maintainer timeout, 2 weeks)
|
|
Sat, 23 Jun 2018
|
[ 08:27 tcberner ] (Only the first 10 of 47 ports in this commit are shown above. )
Update math/gsl to 2.5
PR: 229067
|
|
Fri, 15 Jun 2018
|
[ 11:03 cpm ]
math/asymptote: Udpate to 2.44
- Register the missing dependencies for USE_GL
- Add BDWGC (enable Boehm-Demers-Weiser garbage collector) option. At the
moment, it is disabled by default to fix build on CURRENT and avoid breaking the
interactive mode on 10.4
- Add USES=compiler:c++14-lang to fix segfault with 3D examples
- Use readline from ports
- Sort Makefile and cosmetic fixes
- Silence a explictly called command
Changelog: http://asymptote.sourceforge.net/ChangeLog
PR: 228667
Submitted by: cpm
Approved by: nivit (maintainer timeout, 2 weeks)
MFH: 2018Q2
|
|
Fri, 1 Jun 2018
|
[ 10:16 cpm ] (Only the first 10 of 23 ports in this commit are shown above. )
Bump PORTREVISION due upgrade of devel/boehm-gc to 7.6.6
PR: 228597
Approved by: portmgr (antoine)
|
|
Tue, 22 May 2018
|
[ 13:15 mat ] (Only the first 10 of 74 ports in this commit are shown above. )
Add PY_FLAVOR to Python module dependencies.
Sponsored by: Absolight
|
|
Sat, 10 Mar 2018
|
[ 11:22 cpm ] (Only the first 10 of 22 ports in this commit are shown above. )
Bump PORTREVISION due upgrade of devel/boehm-gc to 7.6.4
PR: 225560
Submitted by: Yasuhiro KIMURA <yasu@utahime@org>
Reviewed by: cpm
Approved by: portmgr (antoine)
|
|
Mon, 8 Jan 2018
|
[ 15:20 cpm ] (Only the first 10 of 19 ports in this commit are shown above. )
Bump PORTREVISION due upgrade of devel/boehm-gc to 7.6.2
Approved by: portmgr (antoine)
|
|
Mon, 31 Jul 2017
|
[ 08:56 nivit ]
- Fix pkg-plist
- Bump PORTREVISION
|
|
Tue, 25 Jul 2017
|
[ 11:55 nivit ]
- Update to 2.41
- Sort values of ONLY_FOR_ARCHS variable
- Sort variables in Makefile
- Use option helpers
ChangeLog: https://sourceforge.net/projects/asymptote/files/2.41/
|
|
Mon, 3 Jul 2017
|
[ 20:38 tcberner ] (Only the first 10 of 42 ports in this commit are shown above. )
Update math/gsl to 2.4
Exp-Run by: antoine
PR: 220408
|
|
Tue, 27 Jun 2017
|
[ 13:46 sunpoet ] (Only the first 10 of 252 ports in this commit are shown above. )
Update devel/readline to 7.0 patch 3
- Bump PORTREVISION for shlib change
Changes: https://cnswww.cns.cwru.edu/php/chet/readline/CHANGES
https://lists.gnu.org/archive/html/bug-bash/2016-09/msg00107.html
https://lists.gnu.org/archive/html/bug-readline/2017-01/msg00002.html
Differential Revision: https://reviews.freebsd.org/D11172
PR: 219947
Exp-run by: antoine
|
|
Tue, 23 May 2017
|
[ 05:03 rezny ] (Only the first 10 of 711 ports in this commit are shown above. )
Revision bump of all ports with USE_GL after consolidation of mesa-libs
Approved by: swills (mentor)
Differential Revision: https://reviews.freebsd.org/D10845
|
|
Thu, 4 May 2017
|
[ 05:20 tcberner ]
Fix shebangs
Reviewed by: mat
Approved by: mat
Differential Revision: https://reviews.freebsd.org/D10527
|
|
Tue, 2 May 2017
|
[ 05:26 tcberner ] (Only the first 10 of 46 ports in this commit are shown above. )
Update math/gsl to 2.3
This release introduces some new features and fixes several bugs:
http://savannah.gnu.org/forum/forum.php?forum_id=8751
* update to 2.3 and take maintainership
* update math/py-gsl to 2.2.0 for gsl2 support
* update math/rubygem-rb-gsl to 2.1.0.2 for gsl2 support
PR: 218952
Exp-run by: antoine
Reviewed by: mat, rakuco
Approved by: rakuco (mentor)
Differential Revision: https://reviews.freebsd.org/D10522
|
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 24 Mar 2016
|
[ 15:47 tijl ] (Only the first 10 of 95 ports in this commit are shown above. )
Make print/ghostscript9-agpl-base the default Ghostscript port. Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.
Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.
Fix print/ghostscript9-agpl-base to install eps2write.
Update math/asymptote to 2.37 to support newer Ghostscript.
PR: 208159
Exp-run by: antoine
Approved by: portmgr (antoine)
|
|
Sat, 22 Aug 2015
|
[ 17:48 hrs ] (Only the first 10 of 354 ports in this commit are shown above. )
- Split ghostscript into X11-independent and -dependent parts:
* print/ghostscript{7,8,9,9-agpl}-base
Installs Ghostscript binary, libgs, and related files.
These ports do not depend on X11 libraries (i.e. x11* devices
are not available). USES=ghostscript will set dependency on
one of them depending on GHOSTSCRIPT_DEFAULT.
The default device is set to "display" or "bbox".
* print/ghostscript{7,8,9,9-agpl}-x11
Installs a shared library which provides X11 support to
the installed Ghostscript binaries. x11* devices will be(Only the first 15 lines of the commit message are shown above )
|
|
Thu, 16 Jul 2015
|
[ 20:53 kwm ] (Only the first 10 of 89 ports in this commit are shown above. )
Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.
Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl
PR: 201201 (exp-run)
Approved by: portmgr (mat@)
Exp run by: antione@ (previous patch)
Differential Revision: https://reviews.freebsd.org/D2938
|
|
Mon, 11 May 2015
|
[ 18:34 mat ] (Only the first 10 of 285 ports in this commit are shown above. )
Cleanup DIST* variables.
When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 8 Oct 2014
|
[ 16:14 wg ]
math/asymptote: switch from py-imaging to py-pillow
- USES python
With hat: python
Approved by: portmgr (bdrewery, implicit)
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Sun, 7 Sep 2014
|
[ 15:09 adamw ]
Change USE_TEX=texlive.
|
|
Sun, 31 Aug 2014
|
[ 16:36 tijl ] (Only the first 10 of 83 ports in this commit are shown above. )
math/fftw3:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove PTHREAD_CFLAGS and PTHREAD_LIBS
- Use MAKE_CMD
|
|
Sun, 17 Aug 2014
|
[ 13:09 tijl ] (Only the first 10 of 45 ports in this commit are shown above. )
math/gsl:
- Add USES=libtool and bump dependent ports
- Add USES=pathfix and INSTALL_TARGET=install-strip
Approved by: portmgr (implicit, bump unstage port)
|
|
Tue, 29 Jul 2014
|
[ 19:11 adamw ] (Only the first 10 of 436 ports in this commit are shown above. )
Convert a bunch of EXTRACT_SUFX=... into USES=tar:...
Approved by: portmgr (not really, but touches unstaged ports)
|
|
Wed, 23 Jul 2014
|
[ 12:43 bapt ]
Remove redudant post-install:
First 2 post-install target is not a good idea
Second framework is already taking care of what the second post-install tries to
do
|
|
Wed, 28 May 2014
|
[ 23:32 nivit ]
- Update to 2.32 [1]
- Remove leading, undefined article from COMMENT
- Add graphics/ImageMagick to RUN_DEPENDS
- Enable garbage collection via devel/boehm-gc-threaded [1]
- Sort variables
- Use autotools [1]
- Use texlive, and don't install files already installed by it [1]
- Use options helpers
- Add option OFFSCREEN (default off) to enable offscreen rendering
using OSMesa library
- Add support for stage dir [1]
- Strip binary file asy
- Add files/patch-configure.ac and files/patch-settings.cc
- Remove Author field, and use a single space after WWW in pkg-descr [1]
Release Notes: http://sourceforge.net/projects/asymptote/files/2.32/
PR: ports/190196 [1]
Submitted by: Shin-ya Murakami <murashin@gfd-dennou.org>
|
|
Wed, 16 Apr 2014
|
[ 18:28 zeising ] (Only the first 10 of 1008 ports in this commit are shown above. )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 20 Sep 2013
|
[ 20:55 bapt ] (Only the first 10 of 665 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
math)
|
|
Mon, 16 Sep 2013
|
[ 16:45 bapt ] (Only the first 10 of 19 ports in this commit are shown above. )
Convert to new perl framework
Convert USE_GMAKE to USES
|
|
Mon, 26 Aug 2013
|
[ 16:06 bf ] (Only the first 10 of 40 ports in this commit are shown above. )
Update math/gsl to 1.16 and adjust some dependent ports
|
|
Sat, 11 May 2013
|
[ 17:58 hrs ] (Only the first 10 of 152 ports in this commit are shown above. )
Rectify USE_TEX to support both of teTeX and TeXLive.
TEX_DEFAULT:
A knob to choose teTeX or TeXLive. One can specify in /etc/make.conf.
USE_TEX:
A knob for port developers. Valid keywords are listed in
bsd.tex.mk.
|
|
Mon, 6 May 2013
|
[ 02:00 hrs ] (Only the first 10 of 150 ports in this commit are shown above. )
Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.
|
|
Sat, 2 Mar 2013
|
[ 22:32 lwhsu ] (Only the first 10 of 28 ports in this commit are shown above. )
- Update *_DEPENDS on x11-toolkits/py-tkinter after _tkinter.so relocation
|
|
Sat, 4 Aug 2012
|
[ 22:52 kwm ] (Only the first 10 of 122 ports in this commit are shown above. )
Switch from libglut to freeglut and retire libglut. Libglut hasn't been
developed in years and has been dropped from the MESA 8.0 distribution.
Freeglut is a rewrite of glut and is actively developed and is used by
many linux distributions instead of libglut.
Bump all ports that directly depend on libglut because of the shlib version
change.
There are some extra items in this patch.
*) Because freeglut doesn't have the same dependancies as libglut, some ports
need extra dependencies added to USE_XORG to make them build.
*) Mark graphics/f90gl broken, f90gl depends on a header that is only shipped
with libglut.
*) Remove option for libglut/freeglut selection in games/cake, only freeglut
remains now.
*) While here fix a png related build issue games/vegastrike.
Thanks to miwi for running the exp-run.
Approved by: portmgr (miwi)
Collaboration with: zeising@
Obtained from: xorg-dev staging area.
|
|
Sun, 8 Jul 2012
|
[ 09:24 nivit ]
- Update to 2.16
- Update MASTER_SITES
- Convert to the new options framework
- Add LICENSE (GPLv3, LGPL3), LICENSE_COMB (dual)
- Add options GSL, FFTW, READLINE
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Wed, 25 Apr 2012
|
[ 14:08 nivit ]
- Update to 2.15
- Disable build of the documentation: print/teTeX is too old to compile it
PR: ports/165553
Submitted by: Andras Jako <jako.andras@eik.bme.hu>
|
|
Thu, 2 Feb 2012
|
[ 20:30 pav ]
- Mark BROKEN: fails to build
cd .. && ../asy -dir ../base -config "" -render=0 -f png -o png/ markers1.asy
../base/plain_xasy.asy: 93.7: runtime: Command exited abnormally: gs -q
-dNOPAUSE -dBATCH -sDEVICE=pngalpha -dEPSCrop -dSAFER -r72x72
-sOutputFile=png/markers1.png png/markers1_.eps
gmake[2]: *** [markers1.png] Error 1
Reported by: pointyhat
|
|
Mon, 17 Oct 2011
|
[ 10:08 bf ] (Only the first 10 of 72 ports in this commit are shown above. )
- update fftw3* to 3.3 [1], and adjust dependent ports
- make use of optimizations by default, where possible
(quad flavor to follow shortly, and mpi at a later date)
Suggestions and patches from: ache, C. Burns, wen
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Mon, 27 Jun 2011
|
[ 02:41 hrs ]
Fix the installation path of tex/context/third/asymptote/colo-asy.tex.
Spotted by: pav, ohauer
PR: ports/158325
|
|
Sat, 18 Jun 2011
|
[ 16:13 hrs ]
- Use print/texinfo for texi2{dvi,pdf} instead of print/teTeX-base.
- Use print/teTeX-base for latex instead of print/teTeX.
- Use share/texmf for TeX-related files instead of share/texmf-local.
|
|
Mon, 9 May 2011
|
[ 16:42 bf ] (Only the first 10 of 45 ports in this commit are shown above. )
Update math/gsl to 1.15, and adjust PORTREVISION
and LIB_DEPENDS of dependent ports
|
|
Mon, 2 May 2011
|
[ 12:44 makc ] (Only the first 10 of 195 ports in this commit are shown above. )
Bump PORTREVISION after open-mofit update
|
|
Tue, 22 Feb 2011
|
[ 21:18 mandree ]
Mark MAKE_JOBS_UNSAFE.
|
|
Sun, 29 Aug 2010
|
[ 21:13 nivit ]
- Update to 2.04
|
|
Tue, 4 May 2010
|
[ 12:15 nivit ]
- Update to 1.93
|
|
Mon, 29 Mar 2010
|
[ 01:12 wen ] (Only the first 10 of 28 ports in this commit are shown above. )
- Bump PORTREVISION to chase the update of math/gsl
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sat, 2 Jan 2010
|
[ 13:13 nivit ]
- Update to 1.91
|
|
Wed, 16 Dec 2009
|
[ 10:32 nivit ]
- Update to 1.90
- Add graphics/py-imaging to RUN_DEPENDS
|
|
Tue, 1 Dec 2009
|
[ 20:33 makc ] (Only the first 10 of 47 ports in this commit are shown above. )
Chase math/gsl update,
bump PORTREVISION
|
|
Sat, 22 Aug 2009
|
[ 00:28 amdmi3 ] (Only the first 10 of 287 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with M
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Wed, 3 Jun 2009
|
[ 19:15 nivit ]
- Update to 1.75
|
|
Mon, 18 May 2009
|
[ 15:08 pav ] (Only the first 10 of 33 ports in this commit are shown above. )
- Chase fftw3 update
|
|
Sun, 12 Apr 2009
|
[ 14:49 nivit ]
- Update to 1.70
|
|
Fri, 10 Apr 2009
|
[ 22:55 nivit ]
- Update to 1.69
|
|
Thu, 26 Mar 2009
|
[ 20:31 nivit ]
- Update to 1.68
|
|
Fri, 20 Mar 2009
|
[ 19:57 nivit ]
- Update to 1.67
|
|
Fri, 27 Feb 2009
|
[ 13:42 nivit ]
- Update to 1.66
|
Number of commits found: 147 (showing only 100 on this page) |
As an Amazon Associate I earn from qualifying purchases.