09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

math: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Amarendra Godbole <amarendra.godbole@gmail.com>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Fehlner (fehlner@gmx.de)
  *  Andrew L. Neporada <andrew@chg.ru>
  *  Andrey <gugu@zoo.rambler.ru>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@plab.ku.dk>
  *  Anton Berezin <tobez@tobez.org>
  *  Anton Shterenlikht
  *  Anton Shterenlikht <mexas@bris.ac.uk>
  *  Bob Eager <bob@eager.cx>
  *  Charlie Kester <corky1951@comcast.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Cheng-Lung Sung <clsung@dragon2.net>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Christopher J. Ruwe
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Chuck Hein <geekdude@pacbell.net>
  *  Cyrille Szymanski <cnszym@gmail.com>
  *  Dan Rue <drue@therub.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David Naylor <dbn@FreeBSD.org>
  *  David Naylor <naylor.b.david@gmail.com>
  *  Dereckson <dereckson@gmail.com>
  *  Devin Teske <dteske@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dmitry Sivachenko <mitya@yandex-team.ru>
  *  Don Croyle <croyle@gelemna.org>
  *  Douglas K. Rand (rand@meridian-enviro.com)
  *  Dylan Simon <dylan@dylex.net>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Eijiro Shibusawa <ej-sib@ice.uec.ac.jp>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eoin Lawless (eoin@maths.tcd.ie)
  *  Eric A. Griff <eagriff@global2000.net>
  *  Eric van Gyzen <vangyzen@stat.duke.edu>
  *  Ewgenij Gawrilow <gawrilow@math.tu-berlin.de>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  Frederic Han <han@math.jussieu.fr>
  *  Gabor Kovesdan <gabor@FreeBSD.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Guangyuan Yang <ygy@FreeBSD.org>
  *  Gustau Perez i Querol <gustau.perez@gmail.com>
  *  Heinz Tschabitscher
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Iblis Lin <iblis@hs.ntnu.edu.tw>
  *  Issei Suzuki <issei@jp.FreeBSD.ORG>
  *  Janni
  *  Jason Harris <jharris@widomaker.com>
  *  Javad Kouhi <javad.kouhi@gmail.com>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes M Dieterich <jmd@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Marino <marino@FreeBSD.org>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Ju Pengfei <ju.pengfei@gmail.com>
  *  Jukka A. Ukkonen <jau@iki.fi>
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Klaus T. Aehlig <aehlig@linta.de>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Kurt Jaeger <fbsd-ports@opsec.eu>
  *  Lars Engels <lme@FreeBSD.org>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.DE>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.de>
  *  Li-Wen Hsu <lwhsu@FreeBSD.org>
  *  Li-Wen Hsu <lwhsu@lwhsu.org>
  *  M. L. Dodson, <bdodson@scms.utmb.edu>
  *  Maho Nakata <maho@FreeBSD.org>
  *  Mario S F Ferreira <lioux@FreeBSD.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark R V Murray <markm@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Matthew Seaman <matthew@FreeBSD.org>
  *  Maurice Castro <maurice@serc.rmit.edu.au>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Maxime Henrion <mux@FreeBSD.org>
  *  Michael Haro <mharo@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Neumann <mneumann@ntecs.de>
  *  Muhammad Moinur Rahmanh <5u623l20@gmail.com>
  *  NAKATA Maho <chat95@mbox.kyoto-inet.or.jp>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nakata Maho <maho@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Olivier Duchateau
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@asme.org>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Pedro Giffuni <pfg@FreeBSD.org>
  *  Peter Pentchev <roam@FreeBSD.org>
  *  Philip Paeps <philip@FreeBSD.org>
  *  Pierre-Paul Lavoie <ppl@nbnet.nb.ca>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Rybicki <meritus@innervision.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Robert Jenssen
  *  Robin Schilham
  *  Rod Taylor <ports@rbt.ca>
  *  Roman Neuhauser <neuhauser@sigpipe.cz>
  *  Sander Vesik <sander@haldjas.folklore.ee>
  *  Scott Flatman <sf@dsinw.com>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Akifyev <asa@agava.com>
  *  Sergey Akifyev <asa@gascom.ru>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Shell Hung <shell@shellhung.org>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stefan A. Deutscher (sad@mailaps.org)
  *  Stefan Esser <se@StefanEsser.FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@FreeBSD.edu>
  *  Stephen Montgomery-Smith <stephen@FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Stephen Montgomery-Smith <stephen@missouri.edu>
  *  Steve Wills <steve@mouf.net>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@f2o.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas (<thierry@pompo.net>)
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Sandford <freebsduser@paradisegreen.co.uk>
  *  Timothy Bourke <timbob@bigpond.com>
  *  Tony Maher
  *  Tz-Huan Huang <tzhuan@csie.org>
  *  Vsevolod Stakhov <vsevolod@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Waitman Gobble <waitman@waitman.net>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Will Andrews <andrews@technologist.com>
  *  Yi-Hsuan Hsin <mhsin@mhsin.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yinghong.Liu <relaxbsd@gmail.com>
  *  Yoshiaki UCHIKAWA <yoshiaki@kt.rim.or.jp>
  *  Yukihiro Nakai <Nakai@technologist.com>
  *  Yuri Victorovich <yuri@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Yuri Victorovich <yuri@tsoft.com>
  *  Zhen REN <bg1tpt@gmail.com>
  *  amir.husaini@gmail.com
  *  arved
  *  asami
  *  b.f. <bf@FreeBSD.org>
  *  bart <lbartoletti@FreeBSD.org>
  *  bauerm
  *  bf <bf2006a@yahoo.com>
  *  bf <bf@FreeBSD.org>
  *  bf@FreeBSD.org
  *  bremner@unb.ca
  *  chinsan
  *  chuckr@FreeBSD.org
  *  dawe <daweonline@gmail.com>
  *  dbader@ece.unm.edu
  *  dd
  *  demon@FreeBSD.org
  *  dikshie
  *  eserte
  *  fenner
  *  gahr
  *  giffunip
  *  gmarco@giovannelli.it
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  janek@gaja.ipan.lublin.pl
  *  jhs@berklix.com / asami (original)
  *  jmz
  *  js@jeannot.org
  *  keith@FreeBSD.org
  *  ljo
  *  mr
  *  nobu@rd.isac.co.jp
  *  pauls@utdallas.edu
  *  pusto@web.de
  *  reg@shale.csir.co.za
  *  rfarmer@predatorlabs.net
  *  stephen@FreeBSD.org
  *  thierry@pompo.net
  *  tobez
  *  will
  * # Created by Matthias Fechner <mfechner@FreeBSD.org>

With hat:	portmgr

    f53eb28

15:01 Tobias Kortkamp (tobik) 

*: Clean up some things

- Fix typos
- Fix overwritten variables with focus on master/slave ports
- Remove unreferenced variables
- Sort categories
- Remove redundant option descriptions
- Clean up commented PORTREVISION
- Add missing USES

Reported by:	portscan

    ae22a78

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

13:16 gerald 

Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.

Suggested by:	tijl

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

18:12 bapt 

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

17:46 gerald 

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

 

14:51 olgeni 

Fix whitespace issues (mixed tab/spaces, alignment) in a few ports.

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

13:24 gerald 

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.

The first part covered  ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.

PR:		214965
Reported by:	thierry

 

16:24 linimon 

Now builds on sparc64.

Approved by:	portmgr (tier-2 blanket)

 

09:00 amdmi3 

- Switch to new test framework
- Switch to options helpers

 

16:20 amdmi3 

Convert LICENSE= "GPLxx # or later" to "GPLxx+"

Approved by:	portmgr blanket

 

11:03 amdmi3 

- Strip libraries
- Clarify LICENSE
- Add LICENSE_FILE

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

20:24 antoine 

makeinfo is not needed for fftw-float

 

20:14 antoine 

Allow to build with texinfo from ports

 

13:25 tijl 

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

13:40 tijl 

Patch makefiles so libtool passes -B${LOCALBASE}/bin to the compiler in
link mode.  Normally USES=libtool deals with this, but the libtool script
in this port is too old to patch easily.

PR:		ports/187274

 

17:27 tijl 

- Add USES=libtool to fix linker problem on FreeBSD/i386 8.x and
  FreeBSD/ia64.
- Remove patch-configure.in (not needed) and remove USE_AUTOTOOLS.
- Add OPTIONS_EXCLUDE=DOCS to math/fftw-float slave port.
- Simplify Makefile a little.

PR:		ports/187274

 

17:06 tijl 

- Add DOCS option.
- USES=fortran gmake.
- Staging.

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

20:55 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

14:45 miwi 

- Fix build after autotools update

 

16:11 miwi 

- Disable installing INFO on float flavor
- Add PORTSCOUT

PR:             166890
Submitted by:   Ports Fury

22:49 pav 

- float flavor installs .info too

Reported by:    pointyhat

03:56 miwi 

- Unbreak

Submitted by:   ports fury
Feature safe:   yes

07:59 pav 

- Mark BROKEN: does not configure
  ===>  Configuring for fftw-2.1.5_6
  Can't exec "aclocal": No such file or directory at
/usr/local/share/autoconf-2.68/Autom4te/FileUtils.pm line 326.
  autoreconf-2.68: failed to run aclocal: No such file or directory
  *** Error code 1

Reported by:    pointyhat
Feature safe:   yes

16:25 miwi 

- Fix build on i386
- Add LICENSE
- Add MAKE_JOBS_SAFE

PR:             166042
Submitted by:   Ports Fury
Feature safe:   yes

09:09 linimon 

Mark broken on sparc64 as well as i386.

08:27 erwin 

Mark BROKEN on i386: does not build

07:34 ade 

Sync to new bsd.autotools.mk

00:08 gerald 

Bump PORTREVISION for everything that sets USE_FORTRAN=yes which now
implies lang/gcc44 up from lang/gcc43.

Approved by:    portmgr

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

23:53 amdmi3 

- Add regression-test target

PR:             130356
Submitted by:   "Pedro F. Giffuni" <giffunip at tutopia dot com>

12:05 gerald 

No longer pass FC and F77 to CONFIGURE_ENV; this is now done via
Mk/bsd.gcc.mk.

Submitted by:   Steven Kreuzer <skreuzer@exit2shell.com>

01:04 gerald 

Bump PORTREVISION properly (bug in Tools/script/bump_revision.pl).

Reported by:    Scott Allendorf <scott-allendorf@uiowa.edu>

16:34 gerald 

Bump PORTREVISION due to change of USE_FORTRAN=yes to GCC 4.3.

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

08:51 maho 

Now we use USE_FORTRAN=yes to use FORTRAN compiler.

22:46 sat 

- Install sfftw/srfftw headers

09:07 kris 

Use libtool port instead of included one to avoid objformat a.out botch

08:40 maho 

* Migrate to gfortran.
* bump portrevision.

00:29 clsung 

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include irc/ japanese/ java/ lang/ mail/ math/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

22:37 edwin 

Remove USE_REINPLACE from ports starting with M

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

22:29 pav 

- Style: ports@freebsd.org -> ports@FreeBSD.org

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

17:13 lkoeller 

o) Drop maintainership cause I didn't use these ports since months anymore.

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

11:31 ahze 

Force commit to go with last commit

PR:     ports/71272
Approved by:    pav (co mentor)
                Lars K??ller (maintainer)

 

11:29 ahze 

Add support for slave port

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

05:10 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

15:30 krion 

- Do not install useless .la files
- Fix handling info files

PR:             54902
Submitted by:   KATO Tsuguru <tkato@prontomail.com>
Approved by:    fjoe (mentor) (implicit)

17:26 lkoeller 

o) Update to version 2.1.5

20:14 lkoeller 

o) Fix libtool usage (see PR)
o) Upgrade fftw (bugfix release: 2.1.3 -> 2.1.4)

PR:             47581
Submitted by:   Sergey Aleshin <asg@rcd.ru>

12:44 knu 

De-pkg-comment.

22:52 asami 

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

11:38 sobomax 

Final round of the INSTALLS_SHLIBS=yes conversion. Few remaining ports with  
ldconfig in PLIST need personal consideration.