notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Want a good monitor light? See my photosAll times are UTC
Ukraine
This referral link gives you 10% off a Fastmail.com account and gives me a discount on my Fastmail account.

Get notified when packages are built

A new feature has been added. FreshPorts already tracks package built by the FreeBSD project. This information is displayed on each port page. You can now get an email when FreshPorts notices a new package is available for something on one of your watch lists. However, you must opt into that. Click on Report Subscriptions on the right, and New Package Notification box, and click on Update.

Finally, under Watch Lists, click on ABI Package Subscriptions to select your ABI (e.g. FreeBSD:14:amd64) & package set (latest/quarterly) combination for a given watch list. This is what FreshPorts will look for.

non port: math/matlab-installer/Makefile

Number of commits found: 14

Wednesday, 7 Sep 2022
21:10 Stefan E├čer (se) search for other commits by this committer
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)
commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52 commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52 commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52 commit hash: b7f05445c00f2625aa19b4154ebcbce5ed2daa52 b7f0544
Wednesday, 7 Apr 2021
08:09 Mathieu Arnold (mat) search for other commits by this committer
One more small cleanup, forgotten yesterday.
Reported by:	lwhsu
commit hash: cf118ccf875508b9a1c570044c93cfcc82bd455c commit hash: cf118ccf875508b9a1c570044c93cfcc82bd455c commit hash: cf118ccf875508b9a1c570044c93cfcc82bd455c commit hash: cf118ccf875508b9a1c570044c93cfcc82bd455c cf118cc
Tuesday, 6 Apr 2021
14:31 Mathieu Arnold (mat) search for other commits by this committer
Remove # $FreeBSD$ from Makefiles.
commit hash: 305f148f482daf30dcf728039d03d019f88344eb commit hash: 305f148f482daf30dcf728039d03d019f88344eb commit hash: 305f148f482daf30dcf728039d03d019f88344eb commit hash: 305f148f482daf30dcf728039d03d019f88344eb 305f148
Tuesday, 26 Nov 2019
21:46 jkim search for other commits by this committer
Clean up after java/openjdk6 and java/openjdk6-jre removal

java/openjdk6 support was removed from Mk/bsd.java.mk (r512662) and
java/openjdk6 and java/openjdk6-jre were removed from the ports tree
(r512663).  Now this patch completely removes remaining stuff from the
ports tree.

PR:			241953 (exp-run)
Reviewed by:		glewis
Approved by:		portmgr (antoine)
Differential Revision:	https://reviews.freebsd.org/D22342
Original commitRevision:518482 
Wednesday, 31 Jan 2018
01:07 jwb search for other commits by this committer
Multiple ports:
Change maintainer email bacon4000@gmail.com to jwb@FreeBSD.org
Remove Created by comments for same user

Approved by: jrm (mentor)
Differential Revision:  https://reviews.freebsd.org/D14128
Original commitRevision:460452 
Wednesday, 1 Nov 2017
13:21 tijl search for other commits by this committer
Merge Linux ncurses-base into linux_base.  It's needed by ncurses-libs.
Original commitRevision:453285 
Wednesday, 7 Sep 2016
12:43 tijl search for other commits by this committer
- In Uses/linux.mk use the loop variable directly when appending to
  *_DEPENDS.  Helper variables derived from the loop variable aren't
  expanded causing *_DEPENDS to be incorrect.
- Bump all ports with more than one value in USE_LINUX.

PR:		211645
Reported by:	jkim
Original commitRevision:421496 
Monday, 5 Sep 2016
19:23 tijl search for other commits by this committer
- Replace Mk/bsd.linux-apps.mk and Mk/bsd.linux-rpm.mk with
  Mk/Uses/linux.mk.
- Replace USE_LINUX=yes with USES+=linux and USE_LINUX=(.*) with
  USES+=linux:\1 in all ports.
- Replace USE_LINUX_APPS with USE_LINUX in all ports.
- Use INSTALL_SCRIPT instead of INSTALL_PROGRAM to install scripts in some
  ports.
- When USE_LINUX_RPM is defined, simplify the way DISTFILES and EXTRACT_ONLY
  are defined.
- Remove BRANDELF_DIRS and BRANDELF_FILES handling.  In the very rare cases
  that it is still necessary ports can run ${BRANDELF} from post-patch.
- Remove AUTOMATIC_PLIST handling.  Only one port used it.
- Fix Linux MASTER_SITES.
- Replace OVERRIDE_LINUX_BASE_PORT and OVERRIDE_LINUX_NONBASE_PORTS with
  default versions framework.
- bsd.port.mk:
  - Move Linux related bits to Uses/linux.mk, except USE_LINUX_PREFIX.
  - Put USE_LINUX_PREFIX handling after USES processing.
  - Define DOCSDIR, DATADIR, etc. after handling USE_LINUX_PREFIX so it can
    give these variables a different default value.
  - When a package needs to run Linux ldconfig check before installation if
    Linux support is enabled.
- emulators/linux_base-*:
  - Use USES=linux and remove duplication.
  - Remove files/lp.  FreeBSD or CUPS lp(1) should work.
  - Remove files/yp.conf.  No longer seems to be used.
  - Remove pkg-deinstall and move pkg-install into pkg-plist.
  - Update pkg-descr and pkg-message.
  - Fix handling of ldconfig cache in pkg-plist.
- devel/fb-adb: Use a Linux shell to run a Linux script but patch the script
  to use FreeBSD mkdir so mkdir -p $path creates $path and not
  /compat/linux/$path.

PR:		211645
Exp-run by:	antoine
Approved by:	portmgr (antoine)
Original commitRevision:421387 
Friday, 1 Apr 2016
14:16 mat search for other commits by this committer
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight
Original commitRevision:412348 
Friday, 11 Dec 2015
08:48 miwi search for other commits by this committer
- Update maintainer mail address
- Update/Remove MASTER_SITE

PR:		204755
Submitted by:	 jwbacon@tds.net (maintainer)
Approved by:	mat (mentor)
Differential Revision:	D4493
Original commitRevision:403506 
Monday, 22 Sep 2014
10:40 xmj search for other commits by this committer
Update CentOS base to 6.5, add userland ports

The Fedora 10 infrastructure ports have been in use since June 2009 and, while
having served a great deed, have become unsupported upstream and hence affected
by unfixed security vulnerabilities. In addition to that, many recent Linux
binaries need newer libc / stdlibc++ versions.

This commit adds the linux-c6- userland as drop-in replacement for the -f10
infrastructure, as well as upgrading the linux_base-c6 port to CentOS 6.5.

If you want to switch to linux-c6 ports, please define at /etc/make.conf:

    OVERRIDE_LINUX_BASE_PORT=c6
    OVERRIDE_LINUX_NONBASE_PORTS=c6

Additionally, please add the following line to /etc/sysctl.conf:

    compat.linux.osrelease=2.6.18

Upgrading procedures are shown in /usr/ports/UPDATING.

This work has been inspired by Artyom Mirgorodskiy's post to emulation@ in
November 2013, using and extending mav@'s work. It has been tested extensively
and most reported issues were already fixed. Please report any additional bug
or "features" to the emulation mailing list.

Many thanks to: mav@, rene@, allanjude@, netchild@, antoine@, everyone who's
filed Issues and Pull requests on GitHub,

PR:		186820
Differential Revision:	https://reviews.freebsd.org/D793
Reviewed by:	allanjude, antoine, bapt, rene
Approved by:	portmgr (antoine, bapt)
Approved by:	koobs (mentor)
Sponsored by:	Perceivon Hosting Inc.
Original commitRevision:368845 
Tuesday, 29 Jul 2014
21:25 adamw search for other commits by this committer
Remove the final usages of USE_XZ from the tree, and replace them with
USES=tar:xz.

Approved by:	portmgr (most of them)
Original commitRevision:363395 
Wednesday, 12 Feb 2014
20:20 thierry search for other commits by this committer
Uncomment the dependencies, as originally set in ports/184607.

PR:		ports/184607
Submitted by:	Jason Bacon <jwbacon (at) tds.net>
Original commitRevision:344013 
Tuesday, 4 Feb 2014
21:57 thierry search for other commits by this committer
This upgrade generalizes the installer to handle any Matlab version,
adds support for MEX compilation, adds a man page, and improves the user
interface using auto-admin tools.

PR:		ports/184607
Submitted by:	Jason Bacon <jwbacon (at) tds.net>
Original commitRevision:342611 

Number of commits found: 14