| non port: math/octave/Makefile |
|
SVNWeb
|
Number of commits found: 251 (showing only 100 on this page) |
|
Sun, 23 Apr 2023
|
[ 09:09 Gerald Pfeifer (gerald)  ]    8d3e020 (Only the first 10 of 2091 ports in this commit are shown above.  )
*: Bump PORTREVISIONs for math/mpc update to 1.3.1
|
|
Thu, 9 Mar 2023
|
[ 02:17 Stephen Montgomery-Smith (stephen) ] d4f3d79 (Only the first 10 of 116 ports in this commit are shown above. )
math/octave: Update to 8.1.0.
Bump portrevision of all dependent ports.
Mark broken math/octave-forge-database, math/octave-forge-mechanics,
math/octave-forge-mpi math/octave-forge-nlwing2,
math/octave-forge-parallel, math/octave-forge-specfun
Set to default off these ports in math/octave-forge.
Clean up indentation in Mk/Uses/octave.mk.
|
|
Thu, 19 Jan 2023
|
[ 16:45 Thierry Thomas (thierry) ] 112013a (Only the first 10 of 25 ports in this commit are shown above. )
math/suitesparse*: bump PORTREVISION of dependant ports
|
|
Fri, 30 Dec 2022
|
[ 17:54 Muhammad Moinur Rahman (bofh) ] 8231864 (Only the first 10 of 112 ports in this commit are shown above. )
Mk/**octave.mk: Convert to USES=octave
As part of the improvements of USES infrastructure Mk/bsd.octave.mk has
been converted to Mk/Uses/octave.mk. This also declutters some old
stuffs in the octave-* ports and makes it simpler to add more
octave-forge ports easily.
While I am here make all the ports portclippy/portfmt compliant. And use
USES macros whenever possible.
Reviewed by: portmgr
Approved by: tcberner
Differential Revision: https://reviews.freebsd.org/D37887
|
|
Mon, 19 Dec 2022
|
[ 14:44 Muhammad Moinur Rahman (bofh) ] 721e577 (Only the first 10 of 130 ports in this commit are shown above. )
Mk/**tex.mk: Convert bsd.tex.mk to USES=tex
- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
infrastructure and also in the ports which have been removed from the
ports as those are redundant.
In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.
Reviewed by: portmgr
Approved by: portmgr (blanket)
|
|
Sun, 27 Nov 2022
|
[ 11:09 Thierry Thomas (thierry) ] 6f9769f (Only the first 10 of 24 ports in this commit are shown above. )
*/*: bump PORTREVISION after the upgrade of math/suitesparse*
PR: 267742
|
|
Sat, 5 Nov 2022
|
[ 19:21 Stephen Montgomery-Smith (stephen) ] 2815b6d
math/octave: Update to 7.3.0.
|
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias) ] ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above. )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Sat, 30 Jul 2022
|
[ 20:57 Stephen Montgomery-Smith (stephen) ] 03c8f44
math/octave: Update to 7.2.0.
|
|
Wed, 20 Jul 2022
|
[ 14:35 Tobias C. Berner (tcberner) ] 5564b3b (Only the first 10 of 87 ports in this commit are shown above. )
science/hdf5: bump PORTREVISION of consumers
The SO-version increased in the update to 1.12.2 in
a43418b81530f7e897abfbe18dd59f44265a1a0f .
Reported by: VVD <vvd@unislabs.com>
|
[ 14:22 Tobias C. Berner (tcberner) ] f53eb28 (Only the first 10 of 719 ports in this commit are shown above. )
math: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Alessando Sagratini <ale_sagra@hotmail.com>
* Alex Dupre <ale@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Amarendra Godbole <amarendra.godbole@gmail.com>
* Anders Nordby <anders@FreeBSD.org>
* Andreas Fehlner (fehlner@gmx.de)
* Andrew L. Neporada <andrew@chg.ru>
* Andrey <gugu@zoo.rambler.ru>
* Andrey Zakhvatov (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 20 Jun 2022
|
[ 01:30 Yuri Victorovich (yuri) ] def6670
math/sundials: Update 5.7.0 -> 6.2.0
|
|
Sun, 10 Apr 2022
|
[ 08:40 Stephen Montgomery-Smith (stephen) ] 5d42413
math/octave: Remove crud.
|
[ 08:28 Stephen Montgomery-Smith (stephen) ] 3b86347
math/octave: fix pkg-plist.
- This installed a number of files whose path name is derived from the
directory in which the port is built. This is a band-aid fix which
deletes those files. This will enable the installation to work if the
ports directory is something other than /usr/ports.
Reported by: pkg-fallout@
|
|
Sat, 9 Apr 2022
|
[ 02:11 Stephen Montgomery-Smith (stephen) ] 8b44817 (Only the first 10 of 91 ports in this commit are shown above. )
math/octave: commits that should have accompanied cc8553afd083.
|
|
Mon, 28 Mar 2022
|
[ 05:22 Loïc Bartoletti (lbartoletti) ] 8f81938 (Only the first 10 of 11 ports in this commit are shown above. )
devel/qscintilla-qt5: Update to 2.13.2
Change:
- https://riverbankcomputing.com/news/QScintilla_2.13.2_Released
|
|
Fri, 18 Feb 2022
|
[ 21:15 Stephen Montgomery-Smith (stephen) ] 5693794 (Only the first 10 of 26 ports in this commit are shown above. )
math/qhull: Renaming ports
qhull renamed to qhull7.
qhull8 renamed to qhull.
qhull7 marked deprecated.
Dependencies updated.
|
[ 18:44 Thierry Thomas (thierry) ] f1ef83b
math/octave: switch to Qhull8
Patch obtained from https://savannah.gnu.org/bugs/download.php?file_id=51705
PR: 261281
Approved by: stephen (maintainer)
|
|
Thu, 27 Jan 2022
|
[ 20:12 Loïc Bartoletti (lbartoletti) ] 354d8cf (Only the first 10 of 12 ports in this commit are shown above. )
*/*: Update qscintilla2 to 2.13.1
Changes:
- https://riverbankcomputing.com/news/QScintilla_2.13.1_Released
|
|
Wed, 3 Nov 2021
|
[ 17:54 Stephen Montgomery-Smith (stephen) ] f98aee8
math/octave: Update to 6.4.0.
|
|
Fri, 27 Aug 2021
|
[ 22:33 Yuri Victorovich (yuri) ] 8046913 (Only the first 10 of 17 ports in this commit are shown above. )
math/octave: Update 3.1.2 -> 5.7.0
|
|
Tue, 24 Aug 2021
|
[ 18:01 Stephen Montgomery-Smith (stephen) ] 996d3f0
math/octave: Remove extraneous entried in pkg-plist
Bump portrevision.
PR: 258027
Reported by: lantw44@gmail.com
|
|
Tue, 27 Jul 2021
|
[ 18:55 Loïc Bartoletti (lbartoletti) ] 8b9c482 (Only the first 10 of 49 ports in this commit are shown above. )
*/*: PyQt Update qscintilla2 to 2.13.0 and py-qt5-sip to 12.9.0
Changes:
- https://riverbankcomputing.com/news/QScintilla_2.13.0_Released
- https://www.riverbankcomputing.com/hg/sip/raw-file/tip/NEWS
PR: 257308
Exp-run by: antoine
|
|
Fri, 16 Jul 2021
|
[ 03:20 Stephen Montgomery-Smith (stephen) ] ed21e80 (Only the first 10 of 90 ports in this commit are shown above. )
math/octave: Update to 6.3.0.
Also bump revision of dependent octave-forge-* ports.
|
|
Mon, 12 Jul 2021
|
[ 12:36 Loïc Bartoletti (lbartoletti) ] 9713ff9 (Only the first 10 of 46 ports in this commit are shown above. )
devel/qscintilla2: Update to 2.12.1
Changelog:
https://riverbankcomputing.com/news/QScintilla_2.12.1_Released
PR: 257002
Exp-run by: antoine
|
|
Mon, 5 Jul 2021
|
[ 17:02 Stephen Montgomery-Smith (stephen) ] 7ca6c6b
math/octave: Add missing library dependencies.
PR: 256996
Reported by: Philipp Ost <bsd@philippost.de>
|
|
Sun, 4 Jul 2021
|
[ 16:55 Loïc Bartoletti (lbartoletti) ] be86c4f (Only the first 10 of 49 ports in this commit are shown above. )
misc/qtchooser: remove
QtChooser allows you to select your version of Qt among those installed.
However, this tool is no longer supported upstream and will not be
available for Qt6.
By default, our Qt installations are done in
${LOCALBASE}/lib/qt${QT_VERSION} as recommended.
We have added symbolic linking for the main binaries to
${LOCALBASE}/bin with the suffix -qt5.
|
|
Tue, 22 Jun 2021
|
[ 18:53 Kevin Bowling (kbowling) ] da3162c (Only the first 10 of 914 ports in this commit are shown above. )
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
|
|
Tue, 25 May 2021
|
[ 10:00 Thierry Thomas (thierry) ] 8470aea (Only the first 10 of 15 ports in this commit are shown above. )
math/suitesparse: adapt dependency lines after modularization
Do not bump PORTREVISION, because this should not change the resulting
packages.
Note for maintainers: try to not depend on the whole suitesparse package,
especially if your port do not require GraphBLAS (the biggest one).
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 16 Mar 2021
|
[ 09:29 lbartoletti ]   (Only the first 10 of 57 ports in this commit are shown above. )
PyQt5: Update PyQt5 to 5.15.4 and py-qtbuilder to 1.9.1
PR: 254218
Exp-run by: antoine
|
|
Mon, 8 Mar 2021
|
[ 06:49 lbartoletti ] (Only the first 10 of 100 ports in this commit are shown above. )
PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0
* PyQt5: update to 5.15.3
This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.
- Added the missing QImage.setAlphaChannel().
- Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
- Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.
* QScintilla2: update to 2.12.0
This adds support for Qt6 and removes support for Qt4.
- Change the new distname (again)i due to a conflict
- Use the new sip-build system
* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo
PR: 253865
Exp-run by: antoine
|
|
Sun, 21 Feb 2021
|
[ 22:41 stephen ] (Only the first 10 of 115 ports in this commit are shown above. )
- Update math/octave to 6.2.0.
- Bump portrevision of dependent ports.
- Add patches to dependent ports math/octave-forge-* if I can figure them out.
- Mark broken dependent ports I couldn't figure out.
|
|
Mon, 18 Jan 2021
|
[ 19:03 lbartoletti ] (Only the first 10 of 44 ports in this commit are shown above. )
Update qscintilla2 to 2.11.6
|
|
Tue, 1 Dec 2020
|
[ 04:27 stephen ]
- Remove unused libosmesa, enable sndfile.
PR: 251477
Submitted by: jcfyecrayz@liamekaens.com
|
|
Mon, 5 Oct 2020
|
[ 15:50 lbartoletti ] (Only the first 10 of 122 ports in this commit are shown above. )
Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts
[1] RiverBankComputing doesn't offer links to download latest version of some
ports
PR: 247369
Reviewed by: tcberner
Differential Revision: https://reviews.freebsd.org/D25749
Exp-run by: antoine
|
|
Tue, 8 Sep 2020
|
[ 18:07 stephen ]
- Use math/qhull instead of math/qhull5.
- Bump portrevision.
PR: 249182
Submitted by: jcfyecrayz@liamekaens.com
|
|
Wed, 6 May 2020
|
[ 16:39 yuri ] (Only the first 10 of 37 ports in this commit are shown above. )
Bump 37 ports depending on math/openblas through USES=blaslapack:openblas
because after the recent math/openblas update the library name changed in
openblas
|
|
Sat, 11 Apr 2020
|
[ 05:04 lbartoletti ] (Only the first 10 of 67 ports in this commit are shown above. )
Update py-sip to 4.19.21 and qscintilla2 to 2.11.4
- Update py-sip to 4.19.21
- Update qscintilla2 to 2.11.4
- Replace MASTER_SITE_RIVERBANK with https versions
- Replace QSCI2_DISTNAME to match with the new one
PR: 245308
Approved by: tcberner (mentor)
Exp-run by: antoine
|
|
Wed, 5 Feb 2020
|
[ 22:42 stephen ]
- Update to 5.2.0.
|
|
Thu, 30 Jan 2020
|
[ 14:17 swills ] (Only the first 10 of 90 ports in this commit are shown above. )
Fix math/openblas and bump dependent ports
* Fix build on i386 [1]
* Fix science/code_saturne build with new openblas [2]
* Avoid installing private headers [3]
* Prevent build from optimizing for host by correcting build confg [4]
* Bump portrevision of dependent ports [5]
This is correcting issues from r523749 [1][2][4] and r515970 [3]
PR: 231371
Reported by: build cluster [1]
Reported by: Dima Pasechnik <dimpase+freebsd@gmail.com> [2]
Reported by: many [5]
Reviewed by: mat, bapt
Approved by: implicit, since this is a build fix
|
|
Tue, 26 Nov 2019
|
[ 21:46 jkim ] (Only the first 10 of 443 ports in this commit are shown above. )
Clean up after java/openjdk6 and java/openjdk6-jre removal
java/openjdk6 support was removed from Mk/bsd.java.mk (r512662) and
java/openjdk6 and java/openjdk6-jre were removed from the ports tree
(r512663). Now this patch completely removes remaining stuff from the
ports tree.
PR: 241953 (exp-run)
Reviewed by: glewis
Approved by: portmgr (antoine)
Differential Revision: https://reviews.freebsd.org/D22342
|
|
Wed, 6 Nov 2019
|
[ 18:07 zeising ] (Only the first 10 of 117 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories m
Add USES=xorg and USES=gl to ports in categories starting with 'm'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Wed, 15 May 2019
|
[ 03:12 stephen ]
- add JAVA and QT5 option, improve library stripping.
- Bump portrevision.
PR: 237854
Submitted by: phascolarctos@protonmail.ch
|
[ 02:57 stephen ]
- Remove share/info/dir from pkg-plist, because it is a generated file
which is updated during installing packages.
PR: 237774
Submitted by: Ting-Wei Lan <lantw44@gmail.com>
|
|
Mon, 22 Apr 2019
|
[ 13:16 gerald ] (Only the first 10 of 225 ports in this commit are shown above. )
Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.
Suggested by: tijl
|
|
Tue, 9 Apr 2019
|
[ 14:04 sunpoet ] (Only the first 10 of 289 ports in this commit are shown above. )
Update devel/readline to 8.0
- Bump PORTREVISION of dependent ports for shlib change
Changes: https://tiswww.case.edu/php/chet/readline/CHANGES
PR: 236156
Exp-run by: antoine
|
|
Tue, 12 Mar 2019
|
[ 21:09 stephen ]
- Add dependency audio/portaudio.
- Add dependency audio/libsndfile commented out because this port is currently
vulnerable.
- Bump portrevision.
|
|
Sun, 10 Mar 2019
|
[ 04:56 stephen ] (Only the first 10 of 93 ports in this commit are shown above. )
- Update math/octave to 5.1.0.
- Bump portrevision of unbroken octave-forge-* ports.
- Bump portrevision of math/dynare which uses library files from octave.
- Mark broken: octave-forge-(database|dicom|optim|fits|linear|linear|optim|
parallel|signal|strings|struct|tisean|video).
- Broken optional dependencies in math/octave-forge to default to off.
- Bump portrevision of math/octave-forge.
|
|
Wed, 16 Jan 2019
|
[ 11:13 tijl ] (Only the first 10 of 1089 ports in this commit are shown above. )
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 5 Jan 2019
|
[ 22:46 sunpoet ] (Only the first 10 of 61 ports in this commit are shown above. )
Update science/hdf5 to 1.10.4
- Bump PORTREVISION of dependent ports for shlib change
Changes: https://portal.hdfgroup.org/display/support/HDF5%201.10.4#releasenotes
PR: 233070
Submitted by: wen
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sun, 25 Nov 2018
|
[ 05:55 stephen ]
- Make changes to plist that should have been included with r485798.
- Bump portrevision.
Reported by: pkg-fallout@
|
|
Sat, 24 Nov 2018
|
[ 21:55 stephen ]
- Have the build process use gsed instead of sed.
PR: ports/233459
Submitted by: Kyle Evans <kevans@freebsd.org>
|
|
Tue, 20 Nov 2018
|
[ 19:06 stephen ]
- Because of r233240, portrevision should have been bumped.
PR: ports/233357
Submitted by: Lorenzo Salvadore <phascolarctos@protonmail.ch>
|
|
Fri, 16 Nov 2018
|
[ 15:18 stephen ]
- adds USES+= gl (USE_GL without USES+= gl is deprecated);
- adds USES+= desktop-file-utils iconv;
- adds USE_XORG+= xcursor xinerama xrender;
- adds USE_QT+= printsupport sql widgets;
- strips liboctave.so.6.0.0.
- Corrects configure options for --withosmesa
PR: ports/233240
Submitted by: Lorenzo Salvadore <phascolarctos@protonmail.ch>
|
|
Sat, 10 Nov 2018
|
[ 18:12 bapt ] (Only the first 10 of 386 ports in this commit are shown above. )
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
|
|
Fri, 5 Oct 2018
|
[ 05:24 yuri ]
cad/calculix-ccx math/arpack++ math/armadillo math/scilab math/octave: Change
dependency from math/arpack to math/arpack-ng
math/arpack is a dead, unmaintained project, and math/arpack-ng is a maintained
and updated fork.
This commit is effectively a version upgrade of the arpack dependency.
Approved by: portmgr blanket (does not result in a change in contents of the
resulting package)
|
|
Tue, 11 Sep 2018
|
[ 18:34 zeising ] (Only the first 10 of 331 ports in this commit are shown above. )
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
|
|
Wed, 5 Sep 2018
|
[ 22:05 sunpoet ] (Only the first 10 of 50 ports in this commit are shown above. )
Update science/hdf5 to 1.10.2
- Bump PORTREVISION of dependent ports for shlib change
Changes: https://portal.hdfgroup.org/display/support/HDF5%201.10.2#releasenotes
https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.2/src/hdf5-1.10.2-RELEASE.txt
PR: 231009
Exp-run by: antoine
|
|
Sun, 12 Aug 2018
|
[ 02:57 stephen ] (Only the first 10 of 88 ports in this commit are shown above. )
- Update math/octave to 4.4.1.
- Bump portrevision for all octave-forge-* ports.
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Thu, 28 Jun 2018
|
[ 17:39 tcberner ] (Only the first 10 of 1416 ports in this commit are shown above. )
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
|
|
Mon, 7 May 2018
|
[ 00:34 stephen ]
- In the log for r469170, I forgot to mention that I added help and
help-tools to USE_QT4.
- I also forgot to mention Christoph Moench-Tegeder <cmt@burggraben.net>
who told me these changes.
In this revision:
- Switch from QT4 to QT5.
- Bump portrevision.
Submitted by: Adriaan de Groot <adridg@freebsd.org>
Obtained from: https://reviews.freebsd.org/D15328
|
|
Sun, 6 May 2018
|
[ 00:24 stephen ]
- Fixed error in which -qt4 is passed to QT tools. It should be -qt=qt4.
- Set MKINFO in configure_args so that makeinfo works.
- Since plist changed, bump portrevision.
PR: ports/228004
Submitted by: Robert Cina <transitive@gmail.com>
|
|
Sat, 5 May 2018
|
[ 21:45 antoine ]
Explicitely disable docs build as it fails when it's attempted (FreeBSD 11+)
perl ./doc/interpreter/mk-qthelp.pl octave.html
doc/interpreter/octave_interpreter && \
qcollectiongenerator -qt4 doc/interpreter/octave_interpreter.qhcp -o
doc/interpreter/octave_interpreter.qhc >/dev/null && \
rm -f doc/interpreter/octave_interpreter.qhcp
doc/interpreter/octave_interpreter.qhp
qcollectiongenerator: could not find a Qt installation of '4'
Reported by: pkg-fallout
With hat: portmgr
|
|
Thu, 3 May 2018
|
[ 23:42 stephen ] (Only the first 10 of 104 ports in this commit are shown above. )
- Update octave to 4.4.0.
- Either bump portrevision or mark broken for octave-forge-* ports.
- Bump port revision for octave-forge.
|
|
Sun, 29 Apr 2018
|
[ 16:19 tcberner ] (Only the first 10 of 65 ports in this commit are shown above. )
Update the QScintilla2 ports to 2.10.4
|
|
Thu, 26 Apr 2018
|
[ 06:41 yuri ] (Only the first 10 of 16 ports in this commit are shown above. )
math/suitesparse: Update 4.0.2 -> 5.2.0
Port changes:
* Change to DISTVERSION
* Update MASTER_SITES
* Change to LICENSE_COMB=dual
* Add LIB_DEPENDS
* Unbundle metis, made it a dependency
* Update do-build and do-install
* Update WWW
Bump 11 ports.
games/naev is marked broken because it depends on the no longer installed
library.
PR: 210579
Submitted by: yuri
Submitted by: pfg
Approved by: maintainer timeout (maho@FreeBSD.org, 21 months)
Approved by: maintainer timeout (fortran@FreeBSD.org, 45 days)
|
|
Thu, 22 Mar 2018
|
[ 03:10 stephen ]
- Add Makefile.version to share version with ports depending on octave.
PR: ports/226816
Submitted by: Yuri Victorovich <yuri@freebsd.org>
|
|
Wed, 14 Mar 2018
|
[ 22:41 stephen ]
- Update to 4.2.2.
|
|
Sat, 10 Mar 2018
|
[ 17:46 gerald ] (Only the first 10 of 1104 ports in this commit are shown above. )
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).
|
|
Sat, 3 Mar 2018
|
[ 02:21 stephen ]
- Link against osmesa.
- Bump portrevision.
|
|
Thu, 1 Mar 2018
|
[ 19:41 stephen ]
- Make sure qscintilla links correctly to octave (otherwise the built in text
editor
doesn't work in the GUI version).
|
|
Wed, 28 Feb 2018
|
[ 14:40 stephen ]
- Make sure build doesn't use qt5 libraries/utilities.
PR: ports/226246
Submitted by: Ting-Wei Lan <lantw44@gmail.com>
|
|
Mon, 26 Feb 2018
|
[ 09:14 antoine ]
Explicitely disable openmp, for some reasons configure enables it on
10.x amd64 (not other archs) and this causes fallout in some octave-forge
ports
With hat: portmgr
|
|
Sat, 24 Feb 2018
|
[ 21:52 stephen ] (Only the first 10 of 17 ports in this commit are shown above. )
- Update to 4.2.1.
- Maintainership to stephen@.
PR: ports/225073
Submitted by: Ben Lauwens <ben.lauwens@gmail.com>
|
|
Sun, 18 Feb 2018
|
[ 09:55 rakuco ] (Only the first 10 of 71 ports in this commit are shown above. )
Update QScintilla 2.10.2.
Upstream has renamed its libraries and we no longer need to patch
devel/qscintilla-qt5 to create a library whose name does not conflict with
devel/qscintilla's. However, the library names are different so we need to bump
PORTREVISION in several ports (the SOVERSION has changed too).
Thanks to antoine for the exp-run.
PR: 225928
|
|
Fri, 1 Dec 2017
|
[ 17:43 joneum ]
math/octave: Set correct USE_LDCONFIG=
PR: 223690
Reported by: joneum
Approved by: maintainer timeout (2 weeks) rene (mentor)
Differential Revision: https://reviews.freebsd.org/D13245
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Thu, 24 Aug 2017
|
[ 09:13 araujo ]
Bump PORTREVISION to reflect print/gl2ps changes.
PR: ports/218399 (based on)
Submitted by: emaste
|
|
Tue, 27 Jun 2017
|
[ 13:46 sunpoet ] (Only the first 10 of 252 ports in this commit are shown above. )
Update devel/readline to 7.0 patch 3
- Bump PORTREVISION for shlib change
Changes: https://cnswww.cns.cwru.edu/php/chet/readline/CHANGES
https://lists.gnu.org/archive/html/bug-bash/2016-09/msg00107.html
https://lists.gnu.org/archive/html/bug-readline/2017-01/msg00002.html
Differential Revision: https://reviews.freebsd.org/D11172
PR: 219947
Exp-run by: antoine
|
|
Tue, 30 May 2017
|
[ 02:56 sunpoet ] (Only the first 10 of 35 ports in this commit are shown above. )
Update science/hdf5 to 1.10.1
- Bump PORTREVISION for shlib change
Changes: https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.1/src/hdf5-1.10.1-RELEASE.txt
|
|
Tue, 23 May 2017
|
[ 05:03 rezny ] (Only the first 10 of 711 ports in this commit are shown above. )
Revision bump of all ports with USE_GL after consolidation of mesa-libs
Approved by: swills (mentor)
Differential Revision: https://reviews.freebsd.org/D10845
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Sat, 17 Dec 2016
|
[ 13:26 antoine ]
Revert r428758 and unbreak
The portmgr blanket doesn't cover breakages
Pointy hat: sunpoet
|
[ 12:59 sunpoet ]
- Use USES=makeinfo instead of hard-coded BUILD_DEPENDS
- Update RUN_DEPENDS: remove redundant LOCALBASE/bin
Approved by: portmgr (blanket)
|
|
Wed, 7 Dec 2016
|
[ 13:24 gerald ] (Only the first 10 of 227 ports in this commit are shown above. )
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
|
|
Wed, 27 Jul 2016
|
[ 05:44 maho ]
1. Some dependencies were added per QA advice.
2. updated to version 4.0.3
deleted obsolete patch 'patch-libinterp-octave-value-ov-classdef'
Java and GUI are now optional
plist is now generated automatically
revised dependencies
PR: 211291
Submitted by: bsam (1), Alexander Sherikov (2)
|
|
Sun, 5 Jun 2016
|
[ 16:47 antoine ]
Fix build with libc++ 3.8.0, by disabling custom max_align_t definition
PR: 209692
Submitted by: dim@
Approved by: maintainer timeout (2 weeks)
|
|
Wed, 20 Apr 2016
|
[ 20:42 sunpoet ] (Only the first 10 of 32 ports in this commit are shown above. )
- Update to 1.10.0
- Add LICENSE_FILE
- Remove outdated PORTSCOUT
- Re-enable SZIP option by default: it was changed unintentionally in r398300
Changes: https://www.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.0/src/hdf5-1.10.0-RELEASE.txt
https://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
|
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 13 Jan 2016
|
[ 01:53 maho ]
Forgot to add patches, and bump port revision
PR: 201737
Submitted by: you.akira.noda@gmail.com
Also spotted by: stephen@
|
|
Fri, 8 Jan 2016
|
[ 08:18 maho ]
Update to 4.0.0
PR: 201737 (partially)
Submitted by: you.akira.noda@gmail.com
|
|
Sun, 13 Dec 2015
|
[ 12:45 rakuco ] (Only the first 10 of 22 ports in this commit are shown above. )
Update PyQt4 to 4.11.4, SIP to 4.17 and QScintilla2 to 2.9.1.
Bring in some long overdue updates, some of which are required for us to
later land the PyQt5 ports.
One big change with this update is that the PyQt4 ports now install their
.sip files into share/py-sip/PyQt4 instead of share/py-sip. This way we do
not end up with directories like share/py-sip/QtCore, which are especially
confusing once PyQt5 lands and starts installing files with the same names.
Other noteworthy items:
- PORTREVISION has been bumped on ports depending on devel/qscintilla2
because libqscintilla2.so's SOVERSION has changed.
- graphics/seexpr has been converted to USE_PYQT, as the file it used to
define a build-time dependency on x11-toolkits/py-qt4-gui has moved.
Once again, big thanks to Tobias Berner <tcberner@gmail.com> and Guido Falsi
(madpilot@) for their initial work on these ports as part of the effort to
land PyQt5 into the tree (see D2910 in Phabricator for an earlier version of
the PyQt5 patch set).
PR: 205143
|
|
Sun, 11 Oct 2015
|
[ 16:20 marino ] (Only the first 10 of 11 ports in this commit are shown above. )
graphics/GraphicsMagick: Upgrade version 1.3.21 => 1.3.22
GraphicsMagick was just updated, but there was as newer, second
PR to upgrade it once more. And again, the shared library version
has been bumped (haven't these guys heard of symbol versioning?)
While the INDEX references 114 users of GraphicksMagick, I'm going to
only bump the same 8 ports as yesterday. The bump script appears to
be obsolete (still uses CVS!)
PR: 203547
Submitted by: Walter Schwarzenfeld
|
|
Sat, 10 Oct 2015
|
[ 15:20 marino ] (Only the first 10 of 13 ports in this commit are shown above. )
graphics/GraphicsMagick: Upgrade version 1.3.20 => 1.3.21
The shared library versions changed, so bump all the ports that
depend on GraphicsMagick by default too.
PR: 200304
Submitted by: ports fury
|
|
Fri, 28 Aug 2015
|
[ 13:39 amdmi3 ] (Only the first 10 of 49 ports in this commit are shown above. )
- Switch to options helpers
- While here, add some NO_ARCHes and couple missing PORT_OPTIONS=DOCS
Approved by: portmgr blanket
|
Number of commits found: 251 (showing only 100 on this page) |
As an Amazon Associate I earn from qualifying purchases.