14:47 Po-Chuan Hsieh (sunpoet) 

devel/py-python-dateutil: Move devel/py-dateutil to devel/py-python-dateutil

- Convert to USE_PYTHON=pep517
- Bump PORTREVISION of dependent ports for dependency change
- While I'm here, update audio/py-pyradio to use PYTHON_PKGNAMEPREFIX instead of
PKGNAMEPREFIX for *_DEPENDS

    84a372a

02:22 Yuri Victorovich (yuri) 

math/py-pandas: Remove run-time dependency on cython

It is't required and it causes conflicts in other ports, particularly
py-dwave-* ones.

Approved by:	portmgr (bugfix)

    81ac746

00:53 Charlie Li (vishwin) 

devel/py-setuptools: convert individual consumers to ${PY_SETUPTOOLS}

Currently a no-op, but in the future outputs the correct setuptools
port depending on whether USES_PYTHON=distutils is specified.

With hat: python
PR: 270510, 270358

    9a80a6e

10:28 Po-Chuan Hsieh (sunpoet) 

math/py-pandas: Update to 2.0.3

Changes:	https://github.com/pandas-dev/pandas/releases

    977344b

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

18:49 Po-Chuan Hsieh (sunpoet) 

math/py-pandas: Update to 2.0.2

Changes:	https://github.com/pandas-dev/pandas/releases

    89b18d3

16:05 Po-Chuan Hsieh (sunpoet) 

math/py-pandas: Add missing RUN_DEPENDS (py-tzdata)

- While I'm here:
  - Update version requirement of *_DEPENDS
  - Convert to USE_PYTHON=autoplist
  - Convert to USE_PYTHON=pep517
- Bump PORTREVISION for dependency and package change

PR:		271110
Reference:	https://github.com/pandas-dev/pandas/blob/v2.0.1/pyproject.toml#L31

    4f7413f

12:19 Wen Heping (wen) 

math/py-pandas: Update to 2.0.1

PR:		271110
Reported by:	wen@
Exp-run by:	antoine@

    10fa0dc

09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

15:50 Po-Chuan Hsieh (sunpoet) 

math/py-pandas: Update to 1.5.3

Changes:	https://github.com/pandas-dev/pandas/releases

    176fb00

13:02 Po-Chuan Hsieh (sunpoet) 

math/py-pandas: Update to 1.5.2

Changes:	https://github.com/pandas-dev/pandas/releases

    5c939ea

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

09:06 Po-Chuan Hsieh (sunpoet) 

math/py-pandas: Update to 1.5.1

Changes:	https://github.com/pandas-dev/pandas/releases

    e194659

10:45 Wen Heping (wen) 

math/py-pandas: Update to 1.5.0

Update DEPENDS
PR:		267086
Reported by:	wen@
Exp-run by:	antoine@

    5f14a64

03:21 Wen Heping (wen) 

math/py-pandas: Update to 1.4.4

Update DEPENDS
PR:		266333
Reported by:	wen@
Exp-run by:	antoine@

    57be3c4

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

07:32 Wen Heping (wen) 

math/py-pandas: Update to 1.3.5

PR:		261070
Reported by:	wen@
Exp-run by:	antoine@

    e9d6178

10:12 Stefan Eßer (se) 

math/py-pandas: Add CPE information

Approved by:	portmgr (blanket)

    c6de339

20:23 Po-Chuan Hsieh (sunpoet) 

math/py-pandas: Remove PYNUMPY

    1e26ca1

20:44 Po-Chuan Hsieh (sunpoet) 

math/py-pandas: Update to 1.2.5

Changes:	https://github.com/pandas-dev/pandas/releases

    100f003

21:47 Po-Chuan Hsieh (sunpoet) 

math/py-pandas: Add ALCHEMY14 option

    ee4aa41

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

22:32 sunpoet 

Clean up

There is nothing for substitution in pkg-message.

 

13:29 sunpoet 

Update to 1.2.0

Changes:	https://github.com/pandas-dev/pandas/releases
PR:		250103
Exp-run by:	antoine

 

23:02 antoine 

Drop python 2.7 support from a few ports

With hat:	portmgr

 

19:17 sunpoet 

Pass maintainership to python@

PR:		243693
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

05:49 antoine 

Revert r511603, removal of py27 flavor was untested

Reported by:	pkg-fallout
With hat:	portmgr

 

01:28 wen 

- Update to 0.25.1
- Update DEPENDS

PR:		240084
Submitted by:	john@saltant.com(maintainer)

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

06:04 meta 

math/py-pandas: Update to 0.24.2

Add OPTION for databases/py-sqlalchemy13

PR:		236645
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

22:16 swills 

math/py-pandas: Update to 0.24.1

PR:		236453
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

01:16 swills 

math/py-pandas: update to 0.24.0

PR:		235335
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

18:46 swills 

math/py-pandas: Update to 0.23.4

PR:		232252
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

00:05 sunpoet 

Update to 0.23.3

PR:		230161
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

18:17 sunpoet 

Update to 0.23.0

- Add ALCHEMY12 option
- While I'm here:
  - Use >= instead of > for some *_DEPENDS
  - Update WWW

Changes:	https://github.com/pandas-dev/pandas/releases
		https://pandas.pydata.org/pandas-docs/version/0.23.0/whatsnew.html
PR:		228545
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

11:08 sunpoet 

Convert to options dependency helper

Approved by:	portmgr (blanket)

 

17:46 gerald 

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

 

15:08 swills 

math/py-pandas: Update to 0.22.0

PR:		225205
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

12:29 wen 

- Upgrade to 0.21.1
- Remove stale testing bits

PR:		224598
Submitted by:	john@saltant.com(maintainer)

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

18:39 tcberner 

Update math/py-pandas to 0.21.0

PR:		223849
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

15:28 sunpoet 

Update to 0.20.1

Changes:	https://github.com/pandas-dev/pandas/releases
PR:		219620
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

19:42 rene 

math/py-pandas: remove support for expired SQL Alchemy 0.8 and 0.9, use
SQL Alchemy 1.0 for test dependencies.

PR:		217593
Submitted by:	rene
Approved by:	maintainer (john@saltant.com)

 

10:50 wen 

- Update to 0.19.2
- Expand optional dependency on SQLAlchemy to v1.1
- Strip binary modules

PR:		215876
Submitted by:	john@saltant.com(maintainer)

 

01:57 wen 

- Update to 0.19.1

PR:		214301
Submitted by:	john@saltant.com(maintainer)

 

10:52 matthew 

Reorganise and modernise the py-sqlalchemy ports.

 - Introduce new ports for the sqlalchemy 0.9 and 1.0 release branches.
 - Deprecate the ports for the 0.6 and 0.7 release branches, as these
   have been declared EoL and are no longer supported by upstream.
 - Update to the latest available version in each branch.

In detail:

   Port                 Version Maintainer
   ----------------------------------------------
   py-sqlalchemy06      0.6.9   nivit@FreeBSD.org (Deprecate 2016-08-20) [1]
   py-sqlalchemy07      0.7.10  nivit@FreeBSD.org (renamed py-sqlalchemy,
Deprecate 2016-08-20) [1]
   py-sqlalchemy08      0.8.7   nivit@FreeBSD.org (renamed py-sqlalchemy-devel)
[1]
   py-sqlalchemy09      0.9.10  m.tsatsenko@gmail.com (new, repocopy from
py-sqlalchemy-devel) [2]
   py-sqlalchemy10      1.0.13  m.tsatsenko@gmail.com (new, repocopy from
py-sqlalchemy-devel) [2]

 - Use options-helpers and option dependent make targets.
 - Use autoplist for documents as well as python code
 - Add all the docments to the packages: previously an arbitrary
   subset was added in a way that excluded CSS, images and other HTML
   assets.
 - Use TEST_DEPENDS and add a TEST_TARGET instead of having a 'TEST'
   option.
 - Use py-pytest for 0.9.x and later, rather than py-nose.
 - Add CONFLICTS_INSTALL between all of the py-sqlalchemyXY ports.

PR:		191442
Submitted by:	robak
Reviewed by:	robak
Reviewed by:	pi
Approved by:	nivit (maintainer timeout, ~300days) [1]
Approved by:    m.tsatsenko@gmail.com (maintainer) [2]
Sponsored by:	https://reviews.freebsd.org/D908

 

19:56 pi 

math/py-pandas: 0.17.0 -> 0.18.1

Changes:
  http://pandas.pydata.org/pandas-docs/version/0.18.1/
- Add optional dependencies on devel/py-Jinja2 and textproc/py-xlsxwriter

PR:		209521
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

19:34 antoine 

- Remove OPENPYXL1 option from py-pandas
- Set an EXPIRATION_DATE for py-openpyxl1 (deprecated since May 2014)

 

13:12 wen 

- Update to 0.17.0

PR:		204183
Submitted by:	john@saltant.com(maintainer)

 

09:36 robak 

math/py-pandas: update 0.16.1 -> 0.16.2

PR:		201363
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

04:56 xmj 

math/py-pandas: update to 0.16.1

- update to 0.16.1
- add SQL storage option, and SQLalchemy dependency
- enable Bottleneck and Numexpr options by default

PR:		200451
Submitted by:	John W. O'Brien <john@saltant.com>

 

05:55 vanilla 

Upgrade to 0.16.0.

PR:		199011
Submitted by:	maintainer

 

23:39 pawel 

Update to version 0.15.2

PR:		195948
Submitted by:	maintainer

 

13:34 amdmi3 

- Update to 0.15.1

PR:		195535
Submitted by:	john@saltant.com (maintainer)

 

16:11 pawel 

- Update to version 0.15.0
- Offer experimental Openpyxl2 support
- epend on minimum versions of optional ports per upstream docs

PR:		194504
Submitted by:	maintainer

 

13:42 robak 

math/py-pandas: convert to USES=python format

PR:		193205
Submitted by:	John W. O'Brien <john@saltant.com>
Approved by:	mentors (implicit)

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

16:47 culot 

- Update to 0.14.1

PR:		ports/191857
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

16:47 antoine 

Fix 2 DEPENDS lines

 

08:37 miwi 

- Update to 0.14.0

PR:		190850

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

10:17 rm 

math/py-pandas: update to 0.13.1

- update to 0.13.1
- remove lang/cython from BUILD_DEPENDS now that distfile is fixed
- include RUN_DEPENDS in TEST_DEPENDS
- add devel/py-boto to TEST_DEPENDS for completeness with pkg-message
- remove math/py-statsmodels from TEST_DEPENDS to break circular dependency
- Fix regression-test target to work with non-GitHub distfile which omits
  the ci/ directory. Borrow the print_skipped.py script to do this.

PR:		186802
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

15:21 rm 

- update to 0.13.0
- remove patches, included upstream
- abandon easy_install and use auto-generated packing list
- update pkg-message and TEST_DEPENDS to reflect current recommendations and
  port availability
- add erroneously-omitted lang/cython to TEST_DEPENDS (for 'build_ext -i')
- conform regression-test target to upstream test procedure

while here:
- add lang/cpython as build dependency - C-extension will not be build w/o it
  and the whole build procedure failing.
- update LICENSE (BSD3CLAUSE)

PR:		185803
Submitted by:	"John W. O'Brien" <john@saltant.com> (maintainer)

 

12:54 wg 

math/py-pandas: stagify and add a run dependency

PR:		ports/184096
Submitted by:	maintainer

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

20:55 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

 

13:04 koobs 

math/py-pandas: Update to 0.12.0

- Update to 0.12.0
- Two BUILD_DEPENDS are only RUN_DEPENDS, move them
- Patch some files out of MANIFEST.in
- Cherry pick upstream issue/commit [1]
- Define regression-test target and TEST_DEPENDS
- Document USES=display in support of unit tests

[1] https://github.com/pydata/pandas/issues/4353

PR:		ports/180889
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

23:02 rm 

- update to 0.11.0
- add explicit runtime dependency on databases/py-sqlite3

PR:		178067
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

09:43 culot 

- Update to 0.10.1

PR:		ports/175554
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

06:10 rm 

- update to 0.10.0

PR:		174544
Submitted by:	John W. O'Brien <john@saltant.com> (maintainer)

 

07:23 rm 

- update to 0.9.1

PR:		173691
Submitted by:	John W. O'Brien <john at saltant dot com> (maintainer)
Feature safe:	yes

 

12:52 rm 

- update to 0.9.0
- trim Makefile header

while here:
- change DISTVERSION with PORTVERSION (I missed this when this port was added)

PR:		172528
Submitted by:	John W. O'Brien <john at saltant dot com> (maintainer)
Feature safe:   yes

 

14:57 rm 

Add py-pandas , flexible, high-performance data analysis in Python.

PR:		169168
Submitted by:	John W. O'Brien <john at saltant dot com>