13:16 gerald 

Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.

Suggested by:	tijl

 

11:42 bofh 

math/py-symeig: Mark DEEPRECATED

- Consider using science/py-scipy as this library is included in py-scipy
  since 0.7 and onwards

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

17:46 gerald 

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

 

11:10 antoine 

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

13:24 gerald 

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.

The first part covered  ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.

PR:		214965
Reported by:	thierry

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

14:20 mat 

Remove UNIQUENAME and LATEST_LINK.

UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.

Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.

Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)

Reviewed by:	antoine, bapt
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3336

 

00:14 bofh 

Change my non-FreeBSD MAINTAINER mail to bofh@

Approved by:	bapt

 

16:54 mva 

- Convert ports of math/ to new USES=python

Approved by:	portmgr (implicit)

 

08:39 demon 

Fix build after r369447

Patch by Thierry Thomas <thierry@FreeBSD.org>

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

18:13 sunpoet 

- Update to 1.5
- Add LICENSE
- Pass maintainership to submitter
- While I'm here, convert to new options helper

PR:		ports/188413
Submitted by:	Muhammad Moinur Rahman <5u623l20@gmail.com>

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

17:15 tijl 

Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes".  In most cases
USE_GCC=yes has been omitted though.

Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.

Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...

Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

11:21 wg 

math/py-symeig: support staging and minor changes

 

10:38 koobs 

Reset maintainer for llwang@infor.org

Reset maintainership for llwang@infor.org due to multiple timeouts and email
address permanent failure. Return all ports to the free pool except
py-numpy, which is taken under the wing of the python@ team.

We thank you for your contribution to the FreeBSD project

Approved by:	portmgr

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

20:55 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

 

21:26 bapt 

Convert to new options framework

 

11:14 bf 

adjust linking and comments in dependent ports after the math/atlas update;
math/atlas-devel will be updated to use the same constructs at a later date

PR:             162706
Approved by:    miwi (portmgr)
Feature safe:   yes

00:08 gerald 

Bump PORTREVISION for everything that sets USE_FORTRAN=yes which now
implies lang/gcc44 up from lang/gcc43.

Approved by:    portmgr

00:28 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with M

16:34 gerald 

Bump PORTREVISION due to change of USE_FORTRAN=yes to GCC 4.3.

18:50 miwi 

The symeig module contains a Python wrapper for the LAPACK functions to
solve the standard and generalized eigenvalue problems for symmetric
(hermitian) positive definite matrices. Those specialized algorithms give
an important speed-up with respect to the generic LAPACK eigenvalue
problem solver used by NumPy (linalg.eig and linalg.eigh).

WWW: http://mdp-toolkit.sourceforge.net/symeig.html

PR:             ports/127336
Submitted by:   Li-Lun Wang <llwang at infor.org>