10:20 Felix Palmen (zirias) 

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

    ddae4e9

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

math: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Alessando Sagratini <ale_sagra@hotmail.com>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Amarendra Godbole <amarendra.godbole@gmail.com>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andreas Fehlner (fehlner@gmx.de)
  *  Andrew L. Neporada <andrew@chg.ru>
  *  Andrey <gugu@zoo.rambler.ru>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@plab.ku.dk>
  *  Anton Berezin <tobez@tobez.org>
  *  Anton Shterenlikht
  *  Anton Shterenlikht <mexas@bris.ac.uk>
  *  Bob Eager <bob@eager.cx>
  *  Charlie Kester <corky1951@comcast.net>
  *  Cheng-Lung Sung <clsung@FreeBSD.org>
  *  Cheng-Lung Sung <clsung@dragon2.net>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Christopher J. Ruwe
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Chuck Hein <geekdude@pacbell.net>
  *  Cyrille Szymanski <cnszym@gmail.com>
  *  Dan Rue <drue@therub.org>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  David Naylor <dbn@FreeBSD.org>
  *  David Naylor <naylor.b.david@gmail.com>
  *  Dereckson <dereckson@gmail.com>
  *  Devin Teske <dteske@FreeBSD.org>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dmitry Sivachenko <mitya@yandex-team.ru>
  *  Don Croyle <croyle@gelemna.org>
  *  Douglas K. Rand (rand@meridian-enviro.com)
  *  Dylan Simon <dylan@dylex.net>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Eijiro Shibusawa <ej-sib@ice.uec.ac.jp>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Eoin Lawless (eoin@maths.tcd.ie)
  *  Eric A. Griff <eagriff@global2000.net>
  *  Eric van Gyzen <vangyzen@stat.duke.edu>
  *  Ewgenij Gawrilow <gawrilow@math.tu-berlin.de>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  Frederic Han <han@math.jussieu.fr>
  *  Gabor Kovesdan <gabor@FreeBSD.org>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Guangyuan Yang <ygy@FreeBSD.org>
  *  Gustau Perez i Querol <gustau.perez@gmail.com>
  *  Heinz Tschabitscher
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Iblis Lin <iblis@hs.ntnu.edu.tw>
  *  Issei Suzuki <issei@jp.FreeBSD.ORG>
  *  Janni
  *  Jason Harris <jharris@widomaker.com>
  *  Javad Kouhi <javad.kouhi@gmail.com>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jin-Shan Tseng <tjs@cdpa.nsysu.edu.tw>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Dieterich <dieterich@ogolem.org>
  *  Johannes M Dieterich <jmd@FreeBSD.org>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Marino <marino@FreeBSD.org>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Ju Pengfei <ju.pengfei@gmail.com>
  *  Jukka A. Ukkonen <jau@iki.fi>
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Kevin Lo <kevlo@FreeBSD.org>
  *  Klaus T. Aehlig <aehlig@linta.de>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Kurt Jaeger <fbsd-ports@opsec.eu>
  *  Lars Engels <lme@FreeBSD.org>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.DE>
  *  Lars Koeller <Lars.Koeller@Uni-Bielefeld.de>
  *  Li-Wen Hsu <lwhsu@FreeBSD.org>
  *  Li-Wen Hsu <lwhsu@lwhsu.org>
  *  M. L. Dodson, <bdodson@scms.utmb.edu>
  *  Maho Nakata <maho@FreeBSD.org>
  *  Mario S F Ferreira <lioux@FreeBSD.org>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark R V Murray <markm@FreeBSD.org>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Matthew Seaman <matthew@FreeBSD.org>
  *  Maurice Castro <maurice@serc.rmit.edu.au>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Maxime Henrion <mux@FreeBSD.org>
  *  Michael Haro <mharo@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Neumann <mneumann@ntecs.de>
  *  Muhammad Moinur Rahmanh <5u623l20@gmail.com>
  *  NAKATA Maho <chat95@mbox.kyoto-inet.or.jp>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nakata Maho <maho@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Olivier Duchateau
  *  Pedro F. Giffuni
  *  Pedro F. Giffuni <giffunip@asme.org>
  *  Pedro Giffuni
  *  Pedro Giffuni <giffunip@asme.org>
  *  Pedro Giffuni <pfg@FreeBSD.org>
  *  Peter Pentchev <roam@FreeBSD.org>
  *  Philip Paeps <philip@FreeBSD.org>
  *  Pierre-Paul Lavoie <ppl@nbnet.nb.ca>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Rybicki <meritus@innervision.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Robert Jenssen
  *  Robin Schilham
  *  Rod Taylor <ports@rbt.ca>
  *  Roman Neuhauser <neuhauser@sigpipe.cz>
  *  Sander Vesik <sander@haldjas.folklore.ee>
  *  Scott Flatman <sf@dsinw.com>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Akifyev <asa@agava.com>
  *  Sergey Akifyev <asa@gascom.ru>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Shell Hung <shell@shellhung.org>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stefan A. Deutscher (sad@mailaps.org)
  *  Stefan Esser <se@StefanEsser.FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@FreeBSD.edu>
  *  Stephen Montgomery-Smith <stephen@FreeBSD.org>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Stephen Montgomery-Smith <stephen@missouri.edu>
  *  Steve Wills <steve@mouf.net>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@f2o.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas (<thierry@pompo.net>)
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Sandford <freebsduser@paradisegreen.co.uk>
  *  Timothy Bourke <timbob@bigpond.com>
  *  Tony Maher
  *  Tz-Huan Huang <tzhuan@csie.org>
  *  Vsevolod Stakhov <vsevolod@FreeBSD.org>
  *  Vsevolod Stakhov <vsevolod@highsecure.ru>
  *  Waitman Gobble <waitman@waitman.net>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Will Andrews <andrews@technologist.com>
  *  Yi-Hsuan Hsin <mhsin@mhsin.org>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yinghong.Liu <relaxbsd@gmail.com>
  *  Yoshiaki UCHIKAWA <yoshiaki@kt.rim.or.jp>
  *  Yukihiro Nakai <Nakai@technologist.com>
  *  Yuri Victorovich <yuri@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Yuri Victorovich <yuri@tsoft.com>
  *  Zhen REN <bg1tpt@gmail.com>
  *  amir.husaini@gmail.com
  *  arved
  *  asami
  *  b.f. <bf@FreeBSD.org>
  *  bart <lbartoletti@FreeBSD.org>
  *  bauerm
  *  bf <bf2006a@yahoo.com>
  *  bf <bf@FreeBSD.org>
  *  bf@FreeBSD.org
  *  bremner@unb.ca
  *  chinsan
  *  chuckr@FreeBSD.org
  *  dawe <daweonline@gmail.com>
  *  dbader@ece.unm.edu
  *  dd
  *  demon@FreeBSD.org
  *  dikshie
  *  eserte
  *  fenner
  *  gahr
  *  giffunip
  *  gmarco@giovannelli.it
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  janek@gaja.ipan.lublin.pl
  *  jhs@berklix.com / asami (original)
  *  jmz
  *  js@jeannot.org
  *  keith@FreeBSD.org
  *  ljo
  *  mr
  *  nobu@rd.isac.co.jp
  *  pauls@utdallas.edu
  *  pusto@web.de
  *  reg@shale.csir.co.za
  *  rfarmer@predatorlabs.net
  *  stephen@FreeBSD.org
  *  thierry@pompo.net
  *  tobez
  *  will
  * # Created by Matthias Fechner <mfechner@FreeBSD.org>

With hat:	portmgr

    f53eb28

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

11:46 mikael 

math/speedcrunch: fix build with qt5.14

PR:		246033
Approved by:	danfe (maintainer)

 

12:35 tcberner 

Update Qt5 to 5.14.2

Very big thanks go again to kai@ who provided the www/qt5-webengine upgrade (to
5.14.0).
Notably, video capture support was re-enabled.

Announcement:
        https://www.qt.io/blog/qt-5.14-has-released

PR:		244964
Exp-run by:	antoine

 

18:07 zeising 

Add USES=xorg USES=gl, ports categories m

Add USES=xorg and USES=gl to ports in categories starting with 'm'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

16:03 danfe 

- Reorder Makefile knobs to what is normally expected in our ports, and
  switch from setting more low-level CMAKE_SOURCE_PATH to WRKSRC_SUBDIR
- Current port version is 0.12.0 while upstream lists it as 0.12; while
  they're equal per `pkg version -t', leave an XXX note to make both of
  them consistent and report correct version in the About dialog window
- Take the port under my wing for the time being

 

03:17 linimon 

Fix build on gcc-based architectures:

  The compiler feature "cxx_decltype" is not known to CXX compiler

Approved by:	portmgr (tier-2 blanket)

 

11:56 danfe 

- Update to the latest Bitbucket commit
- Rephrase port description to follow README file
  more closely and for general neatness
- Report correct version in the "About" dialog
- Add missing `sql' Qt5 component to USE_QT

 

10:42 danfe 

Fix various misspellings of PORTREVISION.

 

17:23 tobik 

Reset MAINTAINER of some ports

PR:		235429
Submitted by:	mikael.urankar@gmail.com (maintainer)

 

11:13 tijl 

Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash.  Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.

Remove the weak wrappers (make them Linux specific).  This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.

[1]
https://github.com/qt/qtwebengine/commit/5c2cbfccf9aafb547b0b30914c4056abd25942a4
[2]
https://github.com/qt/qtwebengine/commit/2ed5054e3a800fa97c2c9e920ba1e6ea4b6ef2a5
[3]
https://github.com/qt/qtwebengine/commit/009f5ebb4bd6e50188671e0815a5dae6afe39db5

Bump all ports that depend on Qt5.

PR:		234070
Exp-run by:	antoine
Approved by:	kde (adridg)

 

20:25 tcberner 

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

 

14:38 swills 

math/speedcrunch: remove uneeded depends

PR:		230441
Submitted by:	Andrew Romanenko <melanhit@gmail.com>
Approved by:	mikael.urankar@gmail.com (maintainer)

 

17:39 tcberner 

Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540

 

14:57 amdmi3 

- Update to 0.12.0
- Chase move to bitbucket
- Pass maintainership to submitter

PR:		217460
Submitted by:	mikael.urankar@gmail.com, lightside@gmx.com
Reported by:	godevilove@ya.ru

 

12:40 amdmi3 

- Add LICENSE
- Simplify patching
- Regenerate patches
- Add missing depends

 

15:58 rakuco 

Reassign makc's ports back to the pool.

See "Maintainer Reset" in
https://www.freebsd.org/portmgr/policies_contributors.html. makc's last commit
was in March 31st (r412218), and his ports have been timing out since at least
July (r418155).

I also emailed him 2 weeks ago and have received no response so far.

 

16:32 mat 

Update ports in the [i-m]* category to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

 

16:44 bdrewery 

Update USE_GITHUB so it does not require GH_COMMIT.

Using this new scheme allows only setting the _tag_ or _commit hash_ in
GH_TAGNAME and not having to know the hash for a tag.  This scheme will
download a tarball that has a different checksum than before due to a changed
directory name for extraction.

The following MASTER_SITES are provided to retain the old checksum and
directory structure (that require GH_COMMIT):
  GH -> GHL
  GITHUB -> GITHUB_LEGACY

Differential Revision:	https://reviews.freebsd.org/D748
Submitted by:	amdmi3
Reviewed by:	mat, swills, antoine, bdrewery
With hat:	portmgr

 

10:57 makc 

math/speedcrunch:
- update to 0.11
- remove NLS option (l10ns are incorporated into binary now)

 

13:08 makc 

- Support staging
- Use new LIB_DEPENDS syntax
- Use options helpers
- Convert to USES
- Minor changes/fixes

 

20:55 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

11:48 makc 

- Add global options (DOCS, NLS, etc) to the OPTIONS_DEFINE and partly revert
r315222 [1]
- Convert WITH_DEBUG to new options framework
- Trim Makefile header
- Adjust COMMENTs
- Reformat/update description

[1] See follow-up discussion:
http://lists.freebsd.org/pipermail/svn-ports-head/2013-March/016094.html

 

20:06 makc 

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

 

11:03 makc 

- Convert my ports to new options framework
- use CONFLICTS_INSTALL
- other minor changes

06:44 miwi 

- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4

Review by:      bapt, David Naylor (kde team)

05:26 dinoex 

- update png to 1.5.10

03:26 rakuco 

Remove CMAKE_USE_PTHREAD from the ports using it.

This setting has not had any effect since r1.13 to bsd.cmake.mk, as it
was only useful when we supported FreeBSD < 7.

Approved by:    avilla (mentor), portmgr (miwi)
Feature safe:   yes

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

10:03 makc 

Fix build after Qt4 update.

PR:             ports/137382
Submitted by:   Dima Panov <fluffy at fluffy.khv.ru>

21:00 makc 

Update to 0.10.1
Take maintainership

19:13 makc 

bump PORTREVISION after cmake update

13:44 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

22:12 miwi 

- Add common code to support for cmake based ports.
- Update devel/cmake to 2.6.0 (also fix ports/123092)
- Use the new CMAKE build framework in all ports using cmake

Approved by:    portmgr (pav)

22:19 edwin 

Use ${MASTER_SITE_GOOGLE_CODE} instead of
http://something.googlecode.com/files

PR:             ports/121435 (related)

08:25 linimon 

Reset relaxbsd@gmail.com due to maintainer-timeouts.

Hat:            portmgr

07:19 itetcu 

Bump PORTREVISION for previos commit (QT_COMPONENTS thus DEPENDS change).

07:17 itetcu 

- Update QT_COMPONENTS in Makefile since bsd.qt.mk has been change [1]
- Remove corelib in QT_COMPONENTS because it depends by gui [1]
- use PTHREAD_LIBS [2]

PR:             ports/115519 [1]
Submitted by:   Yinghong.Liu (maintainer) [1], sat@ [2]

13:34 itetcu 

SpeedCrunch is a multiplatform desktop calculator for power users.
It is designed to be enjoyed using keyboard. Result is shown in
scrollable display, history of expressions is available with up
and down arrow.

Some other features:
optional keypad, syntax highlight, matched parenthesis indicator,
just-in-time calculation (show result even before you finish typing)
and autocomplete for variables.

WWW: http://speedcrunch.digitalfanatics.org/

Note: Moved from science to math at danfe@'s request (no repocopy since there
is no history to preserve).

PR:             ports/114969
Submitted by:   Yinghong.Liu <relaxbsd at gmail.com>